Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Norfolk
Gate repair in Norfolk, MA usually costs between $195 and $480 for hinge, post, and latch work, while electric operator repairs on automatic gates run $285 to $650 depending on the board, arm, or motor. Most jobs here are done in one visit. If your gate is sagging, binding, or not opening at all, call (877) 610-2993 and you’ll get a live person, not a voicemail. We’ve been fixing gates since 2001, and Norfolk horse properties and colonial driveways are a big part of what we see every week.
We know the town’s gates: heavy wooden paddock swings off 115A, older LiftMaster and FAAC operators on 1970s colonials, tubular steel driveway entries that freeze solid each winter. Our Gate Repair crew works here regularly. When you call about a gate that won’t latch or an opener that quit after a cold snap, the person who answers knows what you’re describing before you finish explaining it.
Why Gatewood Fence & Gate Is Norfolk’s Preferred Gate Repair Company
Hal Gatewood has been owner-operated since 2001, and the shop’s address and license number are published for anyone who wants to look them up. That matters in a place like Norfolk, where word travels through the horse community and the school committees and the hardware-store line. If we do sloppy work on a paddock gate off 115, we’ll hear about it at the next town event. That’s the accountability we signed up for.
Our customers in Norfolk call us for a few reasons. We answer the phone 24/7 with a live person, so when a driveway gate fails on a Sunday morning before a horse trailer needs to move, someone picks up. We weld on site, so your gate stays in your driveway instead of getting hauled somewhere. And every job carries the 90-Day Done Right Promise in writing: if it’s not done right, we come back and make it right. No fine print.
We’re local in the way it actually matters: we know which Norfolk roads get the worst freeze-thaw, which neighborhoods have the older post-and-rail paddock gates, and which 02056 driveways have operators that were installed before modern safety photo-eyes existed. That knowledge means we diagnose faster and quote accurately, because we’re not guessing from a call script.
For more about how we serve the town, see our Gate Repair in Norfolk page. Or just call (877) 610-2993 and ask for Hal.
Our Gate Repair Services in Norfolk
Electric Gate Repair
The cold, damp Norfolk winters are hard on gate motors, control boards, and wiring connections. A board that worked in October can fail in February because moisture got into the housing and froze. We repair and replace boards, arms, and motors on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. If your opener clicks but won’t move, or the arm and motor run but the gate doesn’t budge, we’ll find the failure fast and fix it same visit in most cases.
Automatic Gate Repair
Many Norfolk automatic gates were installed in the 1990s and early 2000s, when safety photocells were not yet code in every town. If your operator works but the gate doesn’t reverse when something blocks it, you have an entrapment-safety problem that needs correcting. We can often retrofit photo-eyes and safety edges to an existing operator, so you don’t have to replace a perfectly good motor just to make the gate safe.
Hinge & Post Repair
This is the most Norfolk-specific repair we do. On horse properties around town, ground-set wooden posts for paddock and pasture gates are commonly set in gravel rather than concrete, to allow drainage around livestock areas. That’s good for drainage but bad for frost heave. Every winter, the freeze-thaw cycle pushes those posts up and out of plumb, sometimes by two inches or more. We re-set and re-plumb those posts every few seasons as a recurring spring maintenance call.
Gate Realignment
A gate sags in the hinge post, not in the middle, and that’s where we start. Realigning a heavy wooden driveway gate across the 02056 area usually means pulling the post back to plumb, re-seating the hinges, and then adjusting the latch so the gate clears its track without dragging. Fix the panel without the post and you’ll fix it twice. We see this pattern on 1970s and 1990s colonial driveway gates throughout Norfolk, particularly the long private driveways off Route 115.
We also handle lock repair and weld and rust repair on Norfolk gates and posts. If a hinge is cracked or a post base is rusting through, we weld on site and grind it down so it looks right. You don’t need a new gate because a hinge failed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Norfolk
We’re certified to service nine major gate brands, and around Norfolk we see a lot of Linear, Viking, Ghost Controls, and DoorKing operators on driveway and paddock gates. We stock common boards, arms, remotes, and photo-eye kits for these brands, which means fewer trips back and forth and faster repairs for Norfolk customers. If your operator is older and the control board has failed, we’ll tell you honestly whether a retrofit makes sense or whether the cheaper long-term answer is a new operator. We don’t sell you parts you don’t need.
Common Gate Repair Problems We See in Norfolk Homes
- Frost heave pushed the post out of plumb. Most Norfolk paddock gates sit on posts set in gravel for drainage, which makes them shift every winter. We re-plumb the post and adjust the latch so the gate clears correctly.
- Sagging hinge posts on older colonials. Decades of freeze-thaw and heavy use wear the post hole loose. The gate drops, the panel drags, and the operator strains against the extra friction. We reset the post and realign the gate so the motor isn’t fighting the load.
- Obsolete control boards failing after winter. Older LiftMaster and FAAC boards die quietly in February. The gate won’t open, or it opens but won’t close, or the remote stopped working. We replace boards and can add safety photo-eyes at the same time if yours were never installed.
- Latch and hinge hardware seized from rust. Norfolk’s inland climate means less salt air than coastal towns, but it’s still wet. Unprotected steel hinges and latches corrode until the gate won’t latch or the hinge binds. We replace worn hardware and weld reinforcements where needed so it holds up.
Pricing for Gate Repair in Norfolk, MA
Here’s what Norfolk gate repair typically costs, based on the jobs we see most often in the 02056 area:
- Hinge and post repair: $195-$385, depending on how far the post has heaved and whether resetting requires new gravel bedding.
- Gate realignment and latch adjustment: $165-$320, including re-plumb of the hinge post where it’s not too far gone.
- Electric operator motor or board replacement: $285-$650, parts included; we’ll show you the failed part before we replace it.
- Safety photo-eye retrofit: $225-$450, including wiring and alignment on most existing operators.
- Welding and rust repair: $175-$500, depending on how much of the post base or hinge bracket needs rebuilding.
We quote the price before any work starts, so you know exactly what you’re paying before we touch the gate. There’s no trip charge inside the county. Seniors and veterans get a permanent 10% discount, and any repair over $200 qualifies for $40 off. If you have a written estimate from another company, we’ll give you a free second opinion. Call (877) 610-2993 and we’ll give you a firm number.
We Also Serve Cities Near Norfolk
In addition to Norfolk, we regularly work in Millis, Wrentham, Walpole, and Medfield. If you’re just outside the 02056 zip and your gate is acting up, give us a call. The trip charge is waived inside the county, and we’re usually on the road toward you the same day you call.
Serving Norfolk, MA - Our Local Coverage Area
We’re based in the Norfolk area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Norfolk
Because the posts are set in gravel for drainage, and Norfolk’s inland freeze-thaw cycle pushes them out of plumb every winter. We re-set and re-plumb those posts in the spring, and it’s a recurring maintenance call on horse properties around town. Call (877) 610-2993 and we’ll come level the post and adjust the gate so it latches clean.
Usually yes, if the motor and arm are still sound. The most common failure is the control board, which costs less to replace than a whole operator. We’ll test the motor before we quote the board, so you’re not pouring money into a unit that’s near the end. Call us and we’ll diagnose it honestly.
Yes. Sag comes from the hinge post, not the gate panel. We reset the post, re-plumb it, and realign the gate so it clears its track without dragging. We do this on Norfolk colonials and horse properties all season. You don’t need a new gate because a post settled.
Yes. Solar gate openers are common on Norfolk paddock and pasture entries, and we work on them regularly. We can test the panel, battery, and arm, and replace what’s actually failed without selling you a whole new kit. If the gate won’t move or the battery won’t hold a charge, we’ll tell you what’s wrong and what it costs to fix.
It can be. Modern safety standards require entrapment protection so the gate stops or reverses instead of crushing whatever is in its path. If your operator has no photo-eyes or safety edges, we can usually retrofit them to the existing system. It’s worth doing, especially if kids or animals are on the property. Call us for a quote; we’ll be straight about what the retrofit involves.
Is Your Norfolk Gate Failing? Call Us Before It Gets Worse.
If your gate is sagging, binding, frozen shut, or the operator just stopped, call (877) 610-2993. You’ll get a live person 24/7, not a recording. We’ll ask what’s happening, give you a rough idea of what it likely costs, and set a time to come look. Every job is priced upfront and carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and the shop answers the phone. Call today.