Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Newport
Gate parts and welding in Newport runs into the same problem on nearly every job: the river valley works against your metal. High humidity off the Pigeon and French Broad rivers, winter freeze-thaw cycles, and summer heat that bakes moisture into every hinge pin and weld seam. That’s why a gate that held fine in Morristown will sag and corrode within a few seasons here. We fix that, on-site, with the right parts and the right weld for Newport’s conditions. If your gate is dragging, sticking, or pulling away from the post, call Hal Gatewood at (877) 610-2993. We’ll bring the welder to your driveway, not haul your gate away.
Why Gatewood Fence & Gate Is Newport’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and his name has been on the door ever since. That matters in Newport, where a handshake at the hardware store still means something. We don’t hide behind an answering service. A live person picks up the phone 24 hours a day, seven days a week. You call, you get us.
Newport homeowners call us after other companies told them to replace a gate that needed two hours of welding and a new hinge. Repair-first isn’t a slogan here. It’s how we’ve kept the lights on for 29 years. The 90-Day Done Right Promise backs every weld, every hinge, every post we set in Cocke County. If it’s not right, one call brings us back. No runaround, no arguing. The name is on the shop, and the shop is down the road.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Scheduling is coordinated from our Memphis office, but the crew that shows up at your Newport gate lives and works here. We answer for the work because we see you again at the gas station.
Our Gate Parts & Welding Services in Newport
Hinge Replacement
Newport’s humidity gets into hinge pins and eats them from the inside out. A gate sags in the hinge post, not in the middle, and that’s where we start. We cut out the rusted hinge, weld in a new galvanized or stainless replacement, and shim the post so the gate swings level again. Most hinge replacements in Newport take one visit. If the post itself has rotted, we’ll tell you before we start and fix that too.
Post Replacement
Fix the panel without the post and you’ll fix it twice. That’s the rule on Cocke County hillsides, where a post set too shallow in clay or too close to the water table will lean within a few years. We dig a deeper footing, set a new post in concrete, brace it true, and weld or bolt the gate back in place. On sloped driveways off Old Asheville Highway and in the 37821 zip, we account for the grade so the gate clears the ground on both sides of its swing.
Rail Repair
Tube-steel farm gates take a beating on rural Newport properties. The bottom rail gets hit by mowers, cattle lean on the middle rail, and the top rail rusts from the inside where moisture collects. We cut out the bad section, weld in a matching rail, and grind it flush. Farm-style tube-steel drive gates are common across the rural outskirts, and these age rapidly in the valley’s moisture. A good rail repair keeps your gate working another decade instead of buying a whole new panel.
Custom Welding
Some gate problems aren’t a part swap. A cracked ornamental iron frame after an ice storm, a broken latch mount on a livestock gate, a hinge that needs rebuilding rather than replacing. Hal welds on site, in your driveway or out at the pasture fence. We match the metal, not just the job. Newport’s freeze-thaw cycles crack ornamental ironwork through repeated expansion and contraction, especially on north-facing slopes. A proper weld with the right rod stops the crack from running further.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Newport
We stock parts and handle the hardware for nine major gate brands, and the ones we see most around Newport are FAAC, BFT, Linear, and Viking. FAAC and BFT operators show up on a lot of Cocke County estate gates and commercial entrances. Linear and Viking are common on residential swing and slide gates. We keep solenoids, limit switches, control boards, and receiver kits in the truck so a service call in the 37822 area doesn’t turn into two visits. If your operator is from one of those brands, we can usually have it running the same day we show up.
For more on what we repair and build, see our Gate Parts & Welding service page.
Common Gate Parts & Welding Problems We See in Newport Homes
- River silt jamming slide-gate tracks. After any significant Pigeon River or French Broad flood event, gates on low-lying lots come out caked in silt inside their track channels. Rollers jam, operators stall, and the gate won’t budge. We keep track-cleaning tools and penetrating lubricant on every truck as a standard post-flood service item.
- Latch bolts corroded stuck. High humidity off the river gets into latch mechanisms and seizes them. You turn the key and nothing moves, or the handle snaps from forcing it. We replace the bolt with stainless or galvanized hardware and lubricate the assembly so it works without a fight.
- Hinge pins rusted through. The number one cause of sagging gates in Newport. By the time you notice the gate dragging, the pin is usually half gone. Swapping the hinge before the post wallows out saves you a post replacement later.
- Ice storm damage to ornamental frames. Winter ice storms crack cast and ornamental ironwork through repeated freeze-thaw cycling. Fine detail work near hinges and latch plates is where it fails first. A clean weld back at the crack, done before spring, keeps the gate from failing completely.
Pricing for Gate Parts & Welding in Newport, TN
A hinge replacement on a standard residential swing gate in Newport typically runs $180 to $340, depending on the weight of the gate and whether the post needs reinforcement. Post replacement runs $400 to $900 when we’re digging a new footing and setting the post in concrete on a sloped Cocke County driveway. Rail repair is usually $150 to $350 per rail, depending on the length and rust damage. Custom welding jobs, like fixing a cracked ornamental iron frame or rebuilding a latch mount, run $95 to $250 per hour including labor and materials. Every price is quoted and agreed before any work starts. No trip charge inside the county, and you get $40 off any repair over $200. Call (877) 610-2993 for an exact quote, free.
We Also Serve Cities Near Newport
Beyond Newport, we run calls out to Morristown, Jefferson City, Sevierville, and Pigeon Forge. Most days we can be anywhere in those towns within an hour of the phone call. If you live in one of those communities, give us a ring, we’ll figure out the fastest route and tell you when to expect us. Our Newport service area covers the whole county and the surrounding river valley.
Serving Newport, TN - Our Local Coverage Area
We’re based in the Newport area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Newport
When the Pigeon River or French Broad gets up, it carries fine silt and debris into low-lying yards. That silt packs into your slide gate’s track channel and jams the rollers solid. After a flood, the first thing we do is clean the track thoroughly, check the rollers for wear from grinding against the grit, and lubricate every moving part. If the operator stalled mid-cycle, we test the motor and limit switches too. Call (877) 610-2993 and we’ll get your gate rolling again.
Yes. We do this regularly on rural Newport properties where running mains power down a long drive isn’t practical. The opener mounts to the gate post, and on a slope we set the bracket so the gate swings level and clears the grade on both sides. We’ll need to check the hinge strength first, because a solar opener on a weak hinge will tear the post out. Whole job usually takes one visit.
Newport sits at the confluence of two rivers in a valley bowl. Air moisture stays high year-round, and that humidity promotes rust on hinges, latches, and frame welds faster than in higher-elevation towns like Morristown, which sits up and dries out more. That’s why we push galvanized or stainless hardware on every hinge replacement we do here. It costs a little more up front and lasts years longer.
In most cases, yes. A crack near the hinge is a classic freeze-thaw failure. Water gets into the metal, freezes, expands, and splits the iron. We grind the crack open, weld it back with the right rod for ornamental work, and reinforce the area behind the hinge plate. The gate stays in your driveway. Replacing the whole thing is a last resort, not the first suggestion.
The right way is to fix the hinge post first. A gate sags in the hinge post, not in the middle, and that’s where we start. On a slope, we also check that the post is deep enough and the hinge geometry accounts for the grade. On a long sloped driveway off Old Asheville Highway in the 37821 zip, we replaced a sagging farm-style tube-steel swing gate whose hinge post had rotted at the base from years of valley moisture. We dug a deeper post footing, welded a new galvanized hinge post, and hung a Ghost Controls solar gate opener because running mains power down the 300-foot drive wasn’t practical. The gate now swings true and clears the grade on both sides. Call (877) 610-2993 and we’ll do the same for yours.
Whether it’s a rusted hinge a week after the flood or a cracked iron frame from the ice, we’ll tell you what it costs before we start and stand behind the weld when we’re done. Reach Hal Gatewood and the crew at (877) 610-2993. Free estimates, no trip charge inside the county, and a live person on the other end every time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Newport since 2001.