Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Munford, TN
Gate repair in Munford typically costs $150 to $800 depending on what’s failed, and most jobs are quoted and completed same day or next morning. We fix both the ornamental iron driveway gates on 2000s subdivision homes and the heavy farm-style swing gates on rural acreage parcels that Munford’s unique location produces. Call us at (877) 610-2993 and a live person answers, 24/7, who knows gates and knows this area.
Why Munford Homes Are Different
Munford sits at the edge of Memphis’s northward suburban sprawl into Tipton County, meaning gate technicians here serve two very different property types side-by-side: newer 2000s-2010s subdivision homes with automated driveway gates and ornamental iron, and older rural or agricultural parcels with heavy farm-style swing gates on wooden or pipe posts. No single neighboring town has quite this same split between suburban HOA-era hardware and working-farm gate infrastructure on adjacent roads.
The soil is a bigger player here than most people expect. Tipton County’s heavy clay expands through wet winters and contracts through dry summers, and that cycle shoves gate posts out of plumb. It’s the single biggest reason we get called to Munford properties. A gate that hung true in October suddenly drags in February because the post heaved a half inch. Fix the panel without the post and you’ll fix it twice.
Winter ice storms add their own damage. Gates left in the closed position under ice load can snap hinges and bend automated arm openers. And then there’s the mid-2000s opener wave: the LiftMaster and US Automatic units installed during Munford’s building boom are all hitting 15 to 20 years old at once, failing in clusters across entire neighborhoods. A technician who stocks parts for that generation’s hardware can turn calls faster than anyone sourcing parts from Memphis.
Gate Repair in Munford
Gate repair in Munford usually falls into one of two categories: an ornamental iron driveway gate on a 2000s subdivision home that’s stopped opening, or a heavy farm-style swing gate on a rural acreage parcel that’s sagging into the dirt. Hal Gatewood and our crew fix both, and we stock parts for the specific generation of LiftMaster and US Automatic openers that went into Munford homes during the mid-2000s building boom. That means we show up ready to work, not ready to order parts and come back next week.
Electric Gate Repair
Most electric gate failures in Munford come down to three things: a failed control board in an opener that’s 15 to 20 years old, a photocell knocked out of alignment by a shifting post, or a power issue from the panel or a solar battery that’s given up. We diagnose on-site, and for those mid-2000s LiftMaster and US Automatic units that Munford has so many of, we carry replacement boards and safety sensors on the truck. Replacing a failed control board on a 2000s-era LiftMaster unit runs $180 to $340 for the part and labor. We’re certified on nine major brands including Linear, Viking, Ghost Controls, and DoorKing.
Hinge and Post Repair
This is where most Munford gate problems actually begin. Tipton County’s heavy clay soil expands in wet winters and contracts in dry summers, and over a few years that cycle walks gate posts right out of vertical. A gate sags in the hinge post, not in the middle, and that’s where we start. A hinge and post re-set on a standard subdivision iron gate typically runs $250 to $450 depending on whether we’re re-pouring one post or both. We set posts deeper than the original install, brace them while the concrete cures, and rebuild or replace hinges so the gate carries its weight the way it should.
Gate Realignment
A gate that drags on the ground, catches on the latch, or leaves a five-inch gap at the top isn’t broken, it’s out of alignment. On Munford’s subdivision iron gates, realignment usually means re-shimming a shifted hinge post and adjusting the operator’s limit switches. On farm gates, it means lifting the gate, re-seating post mountings, and often re-welding hinge barrels that have egged out from years of use. Gate realignment without post work is usually $150 to $250. We do the welding on-site in your driveway. The gate never leaves your property.
Every repair carries our Gate Repair standard: the 90-Day Done Right Promise in writing, upfront pricing agreed before work starts, and no trip charge inside the county. We also take $40 off any repair over $200, and seniors and veterans save 10% on every job, forever.
Why do gate posts in Munford lean after a few wet winters?
Tipton County’s heavy clay soil expands when saturated during wet winters and contracts during dry summers, slowly working gate posts loose. A post set in a shallow footing or without proper gravel drainage will lean noticeably within two to three seasons. The fix is pulling the post, drilling deeper, and setting it with proper drainage before re-hanging the gate.
Can you repair a LiftMaster gate opener from the 2000s without waiting on parts from Memphis?
Yes. Munford’s mid-2000s subdivision boom means hundreds of homes in the 38058 ZIP have LiftMaster swing gate operators now failing on a predictable schedule. We keep common control boards, safety sensors, and limit switches for that generation on our trucks and can usually complete the repair in one visit.
Gate Installation in Munford
Gate installation in Munford usually runs $2,400 to $6,800 for a standard residential driveway gate with operator, and we can typically start within 5 to 7 business days of the site walk. That price includes the gate itself, posts, operator, safety edges, and wiring. The real question for Munford property owners isn’t whether a gate can be installed, it’s whether it’ll still be square and cycling properly five years from now. That’s where clay soil, post depth, and operator sizing separate a gate that lasts from one that becomes a repair call.
Driveway Gate Installation
Most driveway gate installs in Munford are on properties built in the 2000s and 2010s, when ornamental iron and automated openers became standard along the US-51 corridor. If you’re replacing one, we don’t just swap the gate. We check the existing concrete footing for settlement, because a new gate on an old, heaving base binds and drags within a season. A standard single swing driveway gate with a chain-driven operator in Munford runs $2,400 to $4,200. We set galvanized steel posts deeper than the subdivision builders did.
Swing Gate Installation
This is the bulk of what we install in Munford. Single swing gates for standard driveways, double swing gates for wider entrances, and heavy farm-style swing gates on pipe or timber posts for acreage properties. The biggest failure we see isn’t the operator. It’s the hinge post. In Tipton County’s clay, a post set at 24 inches with a quick concrete collar will move inside two years. We dig 36-inch footings minimum for swing gate hinge posts. A double swing gate or wider ornamental iron gate runs $3,800 to $6,800.
Solar-Powered Gate Operator
Munford has plenty of parcels where running line voltage to the gate means trenching hundreds of feet through clay, crossing driveways, and adding junction boxes along the way. The math doesn’t work. We install solar gate operators from Ghost Controls and other brands we trust, sized for the gate and for West Tennessee’s winter cloud cover. Solar-powered operators add $800 to $1,800 over a line-voltage install, depending on panel size and battery capacity. A solar panel that’s undersized in July works fine in July and dead every February. We’ve learned the difference the hard way, in the field.
Every Gate Installation quote is written, specific, and agreed before any work starts. No trip charge inside the county, and if you have a written estimate from another company, bring it and we’ll give you a free second opinion.
How deep should a gate post be set in Munford’s clay soil to prevent leaning?
For a swing gate hinge post in Tipton County clay, we set posts at a minimum of 36 inches deep, with a gravel drain at the base and a concrete collar that slants water away from the post. That’s deeper than a standard fence post because a gate post carries lateral load every time the gate cycles. Anything shallower heaves and leans within two seasons.
Can a solar gate opener handle a wide farm gate on an acreage property in Munford?
Yes, if it’s sized correctly. We installed a solar opener on a tubular steel swing gate at a property where running line voltage meant trenching 300 feet through heavy clay. Our crew dug a 36-inch post footing, mounted a Ghost Controls solar operator, and set a loop detector so the gate opens only for vehicles exiting. Call (877) 610-2993 and we’ll measure your gate and driveway to spec the right setup.
Gate Motor & Opener in Munford
If your automated gate in Munford has stopped responding, Hal Gatewood and his crew can usually get to your property the same day. The problem is rarely a mystery: most gate motor failures across Tipton County come down to clay soil shifting posts, 2000s-era circuit boards finally quitting, or shared HOA systems that haven’t been touched in a decade. We’ll quote the repair price before any work starts, and that price won’t change when we show up.
Motor Repair
Most gate motor repairs in Munford come down to a failed circuit board, a burned transformer, or a limit switch that stopped telling the motor where to stop. We open the unit, test the controller, and replace only what’s actually dead. Hal gets genuinely annoyed when he finds a gate somebody had been told to replace that just needed a $60 capacitor or a limit switch adjustment. For a typical motor repair in Munford, expect $180 to $340 depending on whether we’re replacing a capacitor, a limit switch, or a control board.
Linear Motor Service
Linear arm operators are the workhorses on Munford’s subdivision swing gates. LiftMaster LA400 and similar models installed during the area’s mid-2000s build-out are now hitting 15 to 20 years, which is right around when control boards give out. We keep repair boards, bushings, and arm hardware for those units so a midweek failure doesn’t leave your driveway blocked until Friday. A full motor and arm replacement on an existing single swing gate runs $900 to $1,600 installed. If the arm is bending or grinding, that’s usually a post alignment problem transferring force into the operator, not the motor itself. We fix both.
Slide Motor Service
Slide gates on larger Munford parcels move on a rail and rollers, and when the rail picks up debris or the rollers wear flat, the motor strains hard enough to burn out the capacitor or trip the breaker constantly. We clean and lube the track, replace worn rollers, and then dial in the motor’s current sensing so it isn’t fighting the gate. Post reset and concrete work add $300 to $600 when the soil has shifted. If the chain is loose or the sprocket has play, we correct that before it eats the gear set.
We offer $40 off any Gate Motor & Opener repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. New installations with wiring, keypad, and two remotes start around $1,400 for a basic single swing.
Why are so many gate openers in Munford failing around the same time?
Because the houses and their gates were built at the same time. Munford’s mid-2000s subdivision boom put very similar operator units on very similar lots within a few years of each other, and those units have a service life of roughly 15 to 20 years. Now whole neighborhoods are hitting that window at once. We stock circuit boards, transformers, and weld-on brackets for that generation’s LiftMaster and US Automatic models.
My gate post leans after winter and the opener strains to move the gate. Is that a motor problem or a post problem?
It’s a post problem that will become a motor problem if you let it go. Tipton County clay swells in wet winters and shrinks in dry summers, moving concrete-set posts out of plumb. When the post leans, the gate binds, the motor draws more current, and eventually the board or gear set dies. We reset the post in a new footing with a compacted gravel base for drainage, then realign the gate before the motor burns out.
Gate Access Control in Munford
Gate access control in Munford means two jobs at once: keeping the subdivision gate working on Tipton County clay, and powering a farm gate 350 feet from the nearest outlet. We handle both from the same truck. If your keypad quit, your remote won’t cycle the opener, or you need phone entry on a long driveway, we’ll quote it upfront and get it working.
Keypad Entry
A keypad entry system in Munford does two jobs: it lets family and delivery drivers get in without a remote, and it keeps the gate closed for everyone else. We install and repair wired and wireless keypads on subdivision gates off Highway 51 and on farm gates way back off Beaver Creek Road and Walker Lane. A keypad entry repair typically runs $150 to $300. The common failure in Munford is the keypad membrane cracking after years of West Tennessee sun and rain, or the control board behind it dying from a power surge.
Remote Control
Remote controls stop working for predictable reasons. The opener lost its programming, the remote’s battery died, or the receiver board on a mid-2000s LiftMaster or US Automatic unit finally gave out. We stock replacement remotes for the brands Munford’s subdivision boom installed, and we program them on site. Replacing a failed control board on a mid-2000s LiftMaster operator runs $250 to $450 depending on the model. If your gate in the 38058 ZIP opens fine from the keypad but ignores the remote, that’s usually a receiver antenna issue worth fixing before you spend money on a whole new opener.
Phone Entry
Phone entry systems work well for Munford properties where the gate is a long way from the house or where you don’t want to hand out remotes to every visitor. Call the gate, it calls your phone, you press a number, and the gate opens. Full phone entry installation starts around $700 and climbs if we’re trenching wire a long distance. The big variable in Munford is cell signal. Tipton County has dead spots, and a phone entry system that relies on cellular needs a signal test before we spec anything.
Every Gate Access Control job gets the same upfront price promise: quoted and agreed before work starts, with no surprises at the door. We also offer a free second opinion on any written estimate from another company.
Can we run a gate operator on our long Munford driveway when there’s no power at the gate?
Yes. A solar gate opener kit with a properly sized panel and battery runs a gate that’s 300 feet or more from the nearest power drop. The key is sizing it for the actual gate weight and how many times a day it opens. We’ve installed solar-powered operators on farm gates off Beaver Creek Road in Munford’s 38058 ZIP where the nearest utility line was farther than the cost of trenching would justify.
Our subdivision gate opener in Munford makes a humming noise but won’t open. Is it worth repairing?
Usually yes. A humming opener that won’t move is often the capacitor, the drive gear, or a bound hinge post overloading the motor. All three are repairable at a fraction of what a new opener costs. The mid-2000s LiftMaster generation installed across Munford’s subdivisions is simple hardware, and parts for it are still available. Call (877) 610-2993 and we’ll diagnose it on-site.
Gate Parts & Welding in Munford
Most gate failures in Munford come down to a handful of parts: hinges that have worn egg-shaped, posts the clay soil has shoved out of plumb, or welds that finally gave way after fifteen years of opening and closing. We fix those in your driveway, on site, without hauling your gate back to some shop across the county. If you live off US-51, in the subdivisions along Munford Avenue, or on one of the older acreage roads outside town, we’ll bring the welder to you.
Hinge Replacement
Gate hinges in Munford take a beating from two directions: the weight of the gate and the movement of the post underneath it. When a hinge wears out, the gate drops at the latch end first. Homeowners in the newer subdivisions along the US-51 corridor call us about gates that won’t latch, and nine times out of ten it’s a hinge that’s been wallowed out. Hinge replacement on a standard ornamental iron driveway gate typically runs $180 to $320 per hinge, including cutting the old one out and welding the new one in place.
Post Replacement
Tipton County’s heavy clay soil is the real culprit behind most leaning gate posts in Munford. The ground swells in wet winters and shrinks in dry summers, heaving posts out of plumb. If the post is the problem, fixing the panel without the post means fixing it twice. Post replacement, with concrete removal and a new footing, usually lands in the $425 to $750 range depending on post size and how deep the old footing goes. We dig out the old footing, set a new post in properly mixed concrete with good drainage, and weld the existing gate back to it.
Custom Welding
Not every gate problem has a stock part that fixes it. Munford’s older acreage properties often have gate frames made from round pipe or angle iron that was never standard hardware. We fabricate brackets, patch torn gate frames, build up worn latch points, and modify gates to accept a motor or a new type of latch. Custom welding is quoted by the job, commonly $120 to $400 for most bracket or frame repairs. All welding happens on site, in your driveway or pasture gate, so nothing has to be disconnected and hauled off.
Every Gate Parts & Welding repair carries the 90-Day Done Right Promise, $40 off any repair over $200, and our permanent 10% discount for seniors and veterans.
What does a Munford homeowner typically pay for a post replacement?
Post replacement in Munford most often runs $425 to $750, depending on concrete depth and post size. That includes removing the old post, setting a new one, and re-hanging the existing gate. Call (877) 610-2993 for a firm quote before we start.
Why does my gate lean in Munford when the ground gets wet?
Tipton County’s clay soil expands when soaked and shrinks when dry, which slowly pushes concrete footings out of alignment. This is the single most common gate problem we see across Munford, and it requires fixing the post, not just hanging the gate straighter. We reset the post deeper with proper drainage so the cycle doesn’t repeat.
Brands We Service in Munford
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Munford’s mid-2000s subdivision hardware, we stock common parts for LiftMaster, Linear, and US Automatic operators so most repairs happen in one visit, not two. See all brands we service.
Pricing for Gate Repair in Munford, TN
| Service | Typical range in Munford |
|---|---|
| Hinge and post re-set, subdivision iron gate | $250-$450 |
| Control board replacement, 2000s-era LiftMaster | $180-$340 |
| Gate realignment without post work | $150-$250 |
| Re-welding hinge barrels and re-setting farm gate posts | $400-$800 |
| Electric gate diagnostic (credited toward repair) | $95 |
| Single swing driveway gate with operator, installed | $2,400-$4,200 |
| Double swing or wide ornamental iron gate, installed | $3,800-$6,800 |
| Solar-powered operator upgrade | $800-$1,800 |
| Gate motor repair (capacitor, limit switch, or board) | $180-$340 |
| Full motor and arm replacement, single swing | $900-$1,600 |
| Hinge replacement, ornamental iron gate (per hinge) | $180-$320 |
| Post replacement with new footing | $425-$750 |
What pushes price up in Munford: deep concrete removal on old farm gate posts, trenching power or control wire long distances on acreage parcels, and sizing operators for gates heavier than the original spec. What doesn’t change: every price is quoted and agreed before work starts, and that’s the price on the invoice.
Neighborhoods We Serve in Munford
We cover all of 38058 and the roads that run off US-51 through town. Typical response time inside Munford is same day or next morning, depending on when you call.
- Brandon Hills
- Country Meadows
- Northaven
- Quito Road corridor
- Historic downtown Munford near Munford High School
Service Area - Cities Near Munford
We serve Munford directly and regularly work in Atoka, Millington, Lakeland, Arlington, and Bartlett. Scheduling and dispatch are coordinated from our Memphis office, but the crew that shows up at your gate knows Tipton County clay and the specific hardware that was installed in this area’s subdivisions. If you’re in Munford proper, there’s no trip charge.
Serving Munford, TN - Our Local Coverage Area
Gatewood Fence & Gate crews serve Munford and the communities around it; dispatch is coordinated from our Memphis office. The map shows the Munford coverage area; if your address is on it, we can help.
Also serving nearby: Munford, TN, Atoka, TN, Millington, TN, Lakeland, TN, Arlington, TN, Bartlett, TN.
FAQs About Gate Repair in Munford
Most calls in Munford receive same-day or next-day service, and if your gate won’t close and your dog is contained only by that gate, we make you a priority. Call (877) 610-2993 and we’ll give you a straight answer on the schedule, not a voicemail queue.
Yes, and you need the architectural approval in writing before we cut, pour, or mount anything. Many Munford subdivisions have covenants that control gate style, height, finish, and where the operator box can sit. We can provide a one-page equipment spec and mounting drawing so your HOA has what they need.
Yes, we cover the full 38058 ZIP, including the subdivision neighborhoods near the high school and the larger rural parcels further out where gates sit on pipe posts and post-and-rail fences. Munford is a two-sided town for gate work, and we’re set up for both.
Call (877) 610-2993 for a free estimate. A live person answers 24 hours a day, and we’ll quote your repair or installation price before any work starts. That’s the way Hal has done it since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Munford Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks