Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Munford
A new gate installation in Munford, TN typically runs from $2,800 to $9,500 depending on the gate’s width, material, and whether you’re adding automation. Most installations take one to two days on site, plus a few days of lead time if we’re welding a custom gate. Hal Gatewood has been building and hanging gates since 2001, and a live person answers our phone around the clock. Call (877) 610-2993 for a free on-site measure and a written price before any work begins.
Why Gatewood Fence & Gate Is Munford’s Preferred Gate Installation Company
Munford is a town we know road by road. We work off Walker Road, down Atoka-Munford Road, through the older lots near Tipton-Rosemark, and inside the newer subdivisions that rolled out along the US-51 corridor in the 2000s and 2010s. That matters because gate work here isn’t one-size-fits-all. Somebody off Stewart Road with a 16-foot tubular steel farm gate needs a different footing, a different operator, and a different hinge plan than somebody with an ornamental iron driveway gate in a 15-year-old subdivision.
Hal Gatewood’s name is on the shop and on every invoice. We’re owner-operated, state-licensed, and insured. When you call, you talk to a person who knows gates, not a phone tree. When we quote a job, that’s the price you pay. When we say we’ll be there Tuesday morning, we’re there Tuesday morning.
Every Gatewood installation carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. If you want a second opinion on any written estimate from another company, we’ll give it free. And we don’t charge a trip fee inside the county.
Key Takeaways
- Gate installations in Munford run roughly $2,800-$9,500, quoted in writing before work starts.
- Tipton County’s clay soil demands deeper post footings and real reinforcement, especially for wide farm gates.
- We build custom gates on site, weld on site, and install solar operators where running power isn’t practical.
- Hal Gatewood has been owner-operator since 2001. Same live person answers the phone day or night.
- Every job includes the 90-Day Done Right Promise and a free estimate. Call (877) 610-2993.
Our Gate Installation Services in Munford
Swing Gate Installation
Swing gates are the workhorse around Munford, especially on the rural parcels east of the city where acreage starts to spread out. We build and hang single and double swing gates in tubular steel, ornamental iron, or treated wood. The critical part isn’t the gate panel, it’s the posts. In Tipton County clay, a post set at 24 inches will lean. We set heavy swing gate posts 36 inches deep or deeper, in concrete, below the frost line. A gate sags in the hinge post, not in the middle, and that is where we start every time.
Driveway Gate Installation
Munford’s subdivision boom left a lot of ornamental iron driveway gates that are now 10 to 20 years old and due for replacement. We install new driveway gates that match the existing fence lines and mount properly on the original posts where possible. If the posts are shot, we tell you straight and replace them rather than hanging a new gate on a failing foundation. Fix the panel without the post and you’ll fix it twice.
Sliding Gate Installation
Sliding gates make sense on long, flat driveways where a swing gate would eat up yard space or fight a slope. We’ll build and hang a cantilever slide gate or a V-track slide gate depending on grade and width. The truth is, on most Munford acreage a swing gate is simpler and easier to maintain. When a slide gate is the right call, we say so, and we make sure the track bed is compacted and drained so heavy clay doesn’t heave the track out of alignment.
Solar Gate Opener Installation
Plenty of Munford properties sit too far from the house panel to run mains power to a gate opener without a costly trench. That’s where solar comes in. We size the panel and battery bank to the gate’s actual weight and daily cycles, not to a brochure chart. An undersized solar opener on a wide farm gate will drain during short December days and leave you stuck against a closed gate. We install solar operators from Linear, Viking, Ghost Controls, and DoorKing, and we get the panel mounted where it actually sees sun, not just where it’s easy to bolt.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Munford
We install and service gate openers from Linear, Viking, Ghost Controls, and DoorKing, along with the bigger names you’ll see on mid-2000s subdivision gates around Munford. Since we’re local, we keep common parts on the truck and in the shop. When an operator fails, you’re not waiting on a ground shipment from a distributor halfway across the country. We fix the gate in your driveway, on site, and stand behind the work with the same 90-Day Done Right Promise we put on new installations. That goes for both new installs and repair work during the install process.
Common Gate Installation Problems We See in Munford Homes
- Clay heave pushes posts out of plumb. Tipton County’s heavy clay expands in wet winters and contracts in dry summers. Posts set shallow or without proper concrete start leaning in a year, and the gate binds or drags. We dig deeper, use more concrete, and brace wide gates properly.
- Undersized solar operators on wide farm gates. A 14- or 16-foot swing gate is heavy. A solar opener sized for a small residential driveway will kill its battery by February. We calculate panel wattage and battery amp-hours against the gate’s real cycle count.
- Mid-2000s subdivision operator failures. Automated gates installed during Munford’s building boom are hitting 15 to 20 years old all at once. Circuit boards, weld points, and seized hinges fail school by school, neighborhood by neighborhood. Because we stock parts for that generation’s LiftMaster and US Automatic units, we can turn those calls faster than anyone sourcing parts from Memphis.
- Hinge fatigue from ice and repeated use. Winter ice storms snap hinges and bend automated arm openers left in the closed position under ice load. We install heavier hinges on farm gates and set limit switches so operators aren’t fighting ice or wind at the end of travel.
Pricing for Gate Installation in Munford, TN
Here are real numbers for the Munford market. A basic single swing gate in treated wood, 10 to 12 feet wide, runs about $2,800 to $4,200 installed with posts and hardware. A steel tube farm gate at 14 to 16 feet, the kind we see on rural lots off Walker Road and Beaver Creek Road, typically lands between $4,800 and $7,500. Custom ornamental iron driveway gates start around $6,000 and run up with automation, intercoms, and solar power. A full automated system including operator, safety photocells, and a keypad or remote usually adds $2,000 to $3,800 depending on brand and whether we’re running mains power or solar.
What moves the price: gate width, post condition, the amount of concrete we’re pouring, type of operator, and whether we’re building a custom gate or hanging a factory panel. We quote a fixed price in writing before any work starts. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote. Estimates are free, and there’s no trip charge inside the county.
We Also Serve Cities Near Munford
We work throughout Tipton County and the surrounding communities. That includes Gate Installation work in Atoka, Millington, Lakeland, and Arlington. If you’re just outside Munford city limits and wondering whether we’ll come out, call and ask. Dispatch and scheduling are coordinated from our Memphis office, but the crews you’ll see are local. For a full look at the area we cover, see Gate Installation in Munford and our full service territory.
Serving Munford, TN - Our Local Coverage Area
We’re based in the Munford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Munford
We set heavy farm swing gate posts 36 inches deep or deeper in concrete, below the frost line, because Tipton County’s clay expands and contracts enough to heave shallower posts out of plumb. For a 14- to 16-foot steel tube gate on a rural Munford parcel, that means digging a 36-inch hole, setting the post in concrete, and bracing it true before the panel ever goes on. The cost difference between 24 inches and 36 inches is small. The repair bill for a leaning post is not. Call (877) 610-2993 if you want us to look at your existing posts before you hang a new gate.
Yes, if it’s sized correctly. A 16-foot steel tube farm gate in Munford needs a solar panel and battery bank matched to the gate’s weight and the number of times it cycles each day. We calculate the draw, add margin for short winter days, and mount the panel where it gets real sun. Undersized solar setups fail in December and January, not in July. If the gate is used constantly for livestock or farm trucks, we’ll often spec a larger panel or a dual-battery setup so you’re not left with a dead opener. Call (877) 610-2993 and we’ll spec it properly.
Yes. Any automated gate operator installed in Tennessee needs safety photocells and an obstruction sensor wired in, both to meet code and to keep the gate from closing on a child, a pet, or a vehicle. We install them on every automated gate we do, residential or farm. It’s not an upsell, it’s part of the system. If we’re automating an existing gate, we’ll check the existing safety edges too. Call (877) 610-2993 with questions about your setup.
Automated gate openers installed during Munford’s mid-2000s building boom are reaching the end of their design life at the same time. Circuit boards dry out and crack, capacitors fail, gears wear. It isn’t one bad batch, it’s a whole generation of hardware aging out together. The operators most common around Munford subdivisions are LiftMaster and US Automatic units from that era, and we keep common boards and parts on hand because we know that wave is coming. When a board goes, you don’t need a new gate, you need a technician who can swap the board and reset the limits. That’s us. Call (877) 610-2993 if your opener is acting up.
A swing gate costs less, has fewer moving parts, and is easier to service. A slide gate takes up driveway side space but works on a slope where a swing gate would drag. On most Munford acreages with long flat driveways, a heavy swing gate with a properly sized operator is the better answer. A slide gate makes sense when the driveway is sloped, or when you need a wider opening without a huge swing radius. We’ll tell you which one fits your property after one look. Call (877) 610-2993 and we’ll come measure and give you a written price either way.
Contact Gatewood Fence & Gate in Munford
If you’re in Munford or nearby and need a gate installed, measured, or repaired, call us at (877) 610-2993 for a free estimate. Hal Gatewood will be the one showing up, or one of his crew who’s been doing this long enough to know what they’re looking at. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Munford since the company was founded in 2001.