Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Munford
If you live in Munford and your gate won’t open, sags on its hinges, or makes a grinding sound every time the motor kicks on, here’s the short version: most gate repairs in Munford run between $180 and $640, and we can usually have someone at your property the same day you call. Not next week. Not after a call center in another state “processes your request.” We’re a local, owner-operated shop, and we laugh at the idea that gate repair has to be complicated. Call (877) 610-2993, tell us what’s happening, and we’ll give you a straight answer about what it’ll take to fix it.
Munford is home to two very different kinds of gates: the ornamental iron driveway gates that came with the subdivisions built along the US-51 corridor in the 2000s and 2010s, and the wide, heavy farm gates on the rural parcels around Beaver Creek Road and the older agricultural streets that predate the housing boom. We work on both. Most crews can’t say that. The truck that shows up at your place carries control boards for a 2008 LiftMaster and Munford Gate Parts & Welding gear for a 20-foot pipe swing gate, because in Munford those two jobs can be ten minutes apart.
We’ve been at this since 2001. Hal Gatewood’s name is on the shop, and if you want to know who you’re hiring, drive over and look him in the eye. That’s how business used to work, and honestly, we never saw a reason to change it.
Why Gatewood Fence & Gate Is Munford’s Preferred Gate Repair Company
We’re not a franchise. We don’t run a “service area” that covers five states from a cubicle. We serve Munford and the towns around it because that’s where our customers live, and when you call us, a live person answers the phone. At 2 p.m. or 2 a.m. Not a voicemail tree. Not a chatbot. That matters when your gate is stuck open at midnight and you’ve got livestock, or a pool, or just a teenager who forgot to come home before curfew.
Every job we do carries a 90-Day Done Right Promise. It’s stamped in writing on every invoice, not buried in fine print or explained away by a phone agent. If we fixed it and it’s not right, one call brings Hal back. No runaround, no “that’s outside the warranty window.” We say what we’ll do, we write it down, and we stand behind it.
We’ve earned our reputation in Munford one gate at a time. Homeowners here tend to be skeptical of national outfits with slick trucks and slicker contracts, and we don’t blame them. People in Munford want a name they can verify and a face they’ll see again at the hardware store. Hal Gatewood’s license number is published. His address is published. He’s not passing through. And when you schedule a repair, you’ll get a set window, not a four-hour “sometime between 8 and noon” shrug.
Our Gate Repair Services in Munford
We’re a full-service Gate Repair shop, but in Munford, four jobs dominate the call log. Here’s what they are and what they actually involve.
Hinge & Post Repair
This is the big one in Munford, and it’s not even close. Tipton County has heavy clay soil that swells when it’s wet and shrinks when it’s dry. Every winter, that cycle pushes shallow-set gate posts out of plumb, and the gate starts to sag, scrape, or bind. A gate sags in the hinge post, not in the middle, and that’s where we start. We excavate, re-set posts with deeper concrete footings, and repair or replace hinges. On a rural acreage off Beaver Creek Road, we rebuilt the hinge post for a 16-foot tubular steel farm swing gate that had leaned two inches out of plumb after a wet winter. That’s a real job we did, and it’s a real problem we see constantly in the 38058.
Gate Realignment
When clay heave throws a gate out of alignment, the operator starts fighting the gate instead of moving it. You’ll hear a hum, or the gate will start to move and then reverse, or the loop detector won’t pick up your car. Fix the panel without the post and you’ll fix it twice. Realignment means checking plumb on both posts, adjusting the hinges, re-leveling the gate leaf, and then re-engaging the operator so it’s not straining against misalignment. It’s one of the most common repairs we do in Munford’s 2003-2012 subdivisions, where the original ornamental iron gates are now 15-20 years old and settling into the clay.
Electric Gate Repair
Electric gate openers around Munford come in two flavors: the AC-powered units wired to a house or garage subpanel in the subdivisions, and the solar-powered openers on rural acreage where there’s no mains power near the entrance. If you need a new Munford Gate Motor & Opener, we install and service both types. Both fail differently. AC units blow control boards, wear out capacitors, and burn contacts. Solar units have the added issue of battery health and panel angle, especially after West Tennessee’s cloudy, wet winters. We diagnose on-site, replace or repair what’s actually broken, and we don’t sell you a new operator when a $95 board swap would do the job. That’s the repair-first philosophy we’ve had since 2001.
Automatic Gate Repair
Automatic gate operators installed during Munford’s mid-2000s building boom are hitting the 15-20 year mark all at once, which means more homeowners are calling us for Gate Access Control in Munford repairs and upgrades. That means failed circuit boards, worn weld points, and seized hinges on very similar LiftMaster and US Automatic units across entire neighborhoods. The good news: we stock parts for that generation of hardware. The bad news: most national companies don’t. We can often turn a subdivision gate repair in Munford the same day because we’re not waiting on parts from a warehouse in Texas.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Munford
We’re certified to service nine major gate brands, and in Munford that matters more than in most towns. The subdivision gates are almost all LiftMaster, FAAC, and BFT. The farm and acreage gates lean heavily on Ghost Controls, Linear, and Viking solar operators. If you’ve got a Ghost Controls opener on a solar panel out on a rural route, we know that system well. If you’ve got a Linear arm on a subdivision driveway gate, same story. We also keep common DoorKing parts on the truck for commercial entrances. The point is, when you call us for gate repair in Munford, we’re not cross-referencing a spec sheet for the first time. We’ve seen your exact operator before, probably this week.
Common Gate Repair Problems We See in Munford Homes
These are the problems that actually happen here, not a generic list copied from a national website:
- Clay heave tilts posts every spring. Munford’s soil expands in wet winters and contracts in dry summers. Over a few seasons, that cycle pushes concrete footings up and sideways, throwing swing gates out of alignment just enough to trip the loop detector or bind the operator. Shallow footings from original subdivision installs make it worse.
- Mid-2000s control boards fail in clusters. Homeowners in Munford’s 2003-2012 subdivisions call us with dead keypads and openers that hum but won’t move. The original control boards from that era are failing on a predictable schedule, and we stock common replacements so you’re not waiting a week.
- Ice storms snap welds and bend slide racks. When Tipton County gets a winter ice event, gates left closed under ice load take real damage. Hinge welds pop. Slide racks warp. The gate might look fine until the ice melts and the motor tries to move it, then something gives. We see this every bad winter on long rural entrances around Munford.
- Wide farm gates overpower residential openers. A 16-foot or 20-foot pipe gate weighs a lot more than an ornamental iron driveway gate. If a previous installer put a residential-class opener on a farm gate, it’s been dying a slow death ever since. We spec heavy-duty operators, usually solar with battery backup, for Munford’s acreage entrances.
Pricing for Gate Repair in Munford, TN
Here’s the straight answer, because you deserve numbers before you pick up the phone. A hinge repair on a residential swing gate in Munford typically runs $180-$340. A full post re-set with new concrete, which is common with our clay soil, lands between $400 and $750 depending on depth and access. Electric gate repair, including diagnostics, usually runs $120-$380 for the service plus parts; a replacement control board for a mid-2000s LiftMaster or US Automatic unit adds $150-$400 depending on the model. Automatic gate opener replacement, including labor, typically lands between $900 and $2,200, with solar-power installations on rural acreage pushing toward the higher end.
Every estimate is free. The price we quote is the price you pay, and it’s agreed before any work starts. We don’t show up with a lowball phone number and then “discover” problems at the door. Standing offers: $40 off any repair over $200, no trip charge inside Tipton County, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Munford
Munford sits at the edge of Memphis’s northward spread into Tipton County, and we run calls throughout the area. Our Gate Repair in Munford customers often ask if we cover the neighboring towns, and the answer is yes: Atoka, Millington, Lakeland, and Arlington are all in our regular service area, and scheduling works the same way, live person on the phone, set arrival window, written price up front.
Serving Munford, TN - Our Local Coverage Area
We’re based in the Munford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Munford
Because Munford sits on Tipton County’s heavy clay, which expands when saturated in winter and contracts when it dries out in summer. That expansion pushes shallow concrete footings upward and sideways, and over a few wet-dry cycles, your posts lean and your gate sags or binds. The fix is a deeper footing, properly re-set posts, and re-aligned hinges, not just tightening a few bolts. Call (877) 610-2993 and we’ll come look at your specific setup, free estimate included.
Yes, and we do it regularly on rural properties around Munford. A solar panel with a deep-cycle battery bank powers a heavy-duty operator, often a Viking or Ghost Controls unit sized to the gate’s actual weight and span. On a job off Beaver Creek Road, we installed a solar opener with a heavy-duty Viking linear arm on a 16-foot tubular steel farm gate because there was no mains power near the entrance, and added a safety photocell across the driveway. If you’re running livestock through, we can also set the gate to hold open during operating hours so you’re not waiting on a slow operator.
Usually yes, and it’s often cheaper than you’d think. The control boards in that generation of LiftMaster and US Automatic openers are failing predictably across Munford’s 2000s-era subdivisions, but a board swap or capacitor replacement is a fraction of the cost of a whole new operator. We’ll diagnose it on-site and tell you honestly whether repair makes sense. If replacement is the right call, we’ll say that too, with a written price before any work starts.
Yes, and it’s not optional on any gate that could close on a person, a pet, or a vehicle. Photo-eyes, also called safety beams or photocells, detect something in the gate’s path and stop or reverse it. They’re required by modern safety standards and we install them on every automatic gate repair in Munford that doesn’t already have functioning ones. A gate that closes on a kid’s bike isn’t a repair bill, it’s a tragedy, and we don’t skip safety gear to save you twenty bucks.
Binding halfway usually means the gate’s track or rollers have been knocked out of alignment, or the gate leaf has warped slightly, or ice damage bent the slide rack. When the motor senses the resistance, it reverses as a safety response. In Munford, winter ice storms are a common trigger, but clay heave can also shift the track mounts over time. We’ll inspect the rollers, the track, and the rack, and repair what’s actually wrong rather than cranking up the motor’s force setting to push through a bind, which just breaks something more expensive later. Call (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Munford and Tipton County since 2001.