Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Hayward, CA
When a gate stops opening in Hayward, it tends to happen at the worst possible moment: you’re already late, the car is running, and the opener just hums without engaging. Or the gate sags so badly it drags a groove into the concrete every time someone uses it. We’ve been untangling those moments for a long time. Gatewood Fence & Gate is locally owned and owner-operated, and we get calls from every corner of Hayward, from the flatland tract homes in 94541 to the hillside drives in 94542 where a fault-line shift has quietly pushed a post out of line. A live person answers the phone at (877) 610-2993 around the clock, and most repair calls in Hayward can be answered the same day.
Why Hayward Homes Are Different
Hayward is a two-part city when it comes to gates. Out in the western flatlands of 94541 and 94544, the salt-laden marine fog rolls in off the bay and eats through gate hardware faster than almost anywhere else in the East Bay. We find hinge pins rusted solid, latch housings crumbling, and operator chassis corroded through on gate installation work that would look nearly new in San Leandro or Castro Valley.
In the Hayward Hills of 94542, the bigger culprit is the ground itself. The Hayward Fault runs right through the hillside neighborhoods, and it doesn’t sit still. It creeps. We regularly see gate posts in 94542 that have tilted visibly or cracked their concrete footings, nudged out of plumb by years of micro-seismic settling. Homeowners call us thinking the motor failed or somebody backed into the gate. What the gate actually needs is to be re-plumbed and re-anchored before any operator work happens. Fix the panel without the post and you’ll fix it twice.
Gate Repair in Hayward
Gate repair in Hayward depends on what’s actually broken, and we quote it plainly before any work begins. A typical service call to diagnose and fix a misaligned sensor or heat-stuck operator runs $150 to $300. Post re-plumbing and concrete re-anchoring, common in the hills, often lands between $350 and $700 depending on footing size and access. Full operator replacements start around $900 and rise with brand and horsepower. Wood gate rebuilds on older flatland homes usually run $400 to $900. The price is quoted and agreed before we start. No surprises at the door.
Our trucks are in and out of Hayward daily, and we know the streets by name, not just by GPS. Most gate repair calls in Hayward are answered the same day.
Fault-Shifted Post Realignment
In 94542, a gate that won’t close properly is often a post that has drifted out of plumb, not a dead motor. We re-plumb the post, re-anchor the footing, and only then touch the operator. Post re-plumbing and concrete re-anchoring in Hayward’s hillside neighborhoods typically runs $350 to $700.
Salt-Corroded Hinge and Latch Repair
Near the bay in 94544 and 94541, hinge pins and latch housings rust through years before the gate leaf itself shows wear. We cut out the corroded hardware, weld in new brackets, and re-hang the gate so it swings true again. A typical repair call for this kind of work falls in the $150 to $300 range.
Wood Gate Rebuilds on Older Tract Homes
The 1950s and 1960s homes in Hayward’s western flatlands are full of wood gates that have outlived their original hardware. We rebuild the frame, replace rotted boards, and set new hinges on steel posts where the wood has given out. Wood gate rebuilds on those older flatland homes usually run $400 to $900.
How much does gate repair cost in Hayward?
Most gate repair calls in Hayward land between $150 and $700, depending on whether it’s a sensor alignment, hinge replacement, or post re-anchoring. Full operator replacements start around $900. You’ll get the exact number quoted and agreed before any work begins. Call (877) 610-2993 for a free estimate.
Can you fix my gate the same day?
In most cases, yes. We keep common Hayward parts on the truck and most repair calls are answered the same day, especially if you call before early afternoon. Call (877) 610-2993 and we’ll tell you exactly when to expect us.
Gate Installation in Hayward
We install driveway gates, pedestrian gates, sliding gates, and swing gates all over Hayward, from the flatlands near 94544 up into the 94542 hills. A typical gate installation in Hayward runs $1,800 to $6,400 depending on material, length, and whether we’re adding a motor, but you’ll know the exact number before any work begins because the price is quoted and agreed upfront, in writing. We know how the salt fog eats hardware out here, and we answer the phone with a live person every time.
Driveway Gates
Driveway gates are what we install most in Hayward, especially in the 94542 hills and the newer developments off Mission Boulevard. We ask about your slope, your driveway width, and whether you want a keypad or a full operator. A single swing driveway gate in steel or aluminum runs $1,800 to $4,200 depending on length and whether it’s manual or motorized.
Sliding Gates
Sliding gates make sense where a swing gate would block the driveway or the street, which happens a lot in Hayward’s tighter 94541 and 94544 lots. Sliding gates also handle the bay wind better than big swing panels, which matters out by the industrial corridors near 94545 where the marine air pushes hard off the water. Sliding gate installation runs $2,500 to $6,400 because the track, frame, and operator all play together.
Wrought-Iron Swing Gates
Wrought-iron swing gates look right on the hillside homes in 94542, but Hayward’s specific problem is the ground under them. The Hayward Fault runs right through that zip code, and slow ground creep tilts posts out of plumb. We check the posts, the hinges, and the closing arc, and we account for the soil movement that’s part of living on that hill. Double gates land between $3,200 and $7,000 depending on width and hardware.
How fast can you install a gate in Hayward?
For a standard pedestrian or single driveway gate with material in stock, we can typically measure and install within 3 to 7 business days depending on our current schedule in Hayward. Custom sliding gates or double gates may add a few days for fabrication. Call (877) 610-2993 to get a firm date.
Do you cover all Hayward neighborhoods?
Yes. We work across 94541, 94542, 94543, and 94544, including the Hayward Hills, the flatlands, Fairview, and the industrial corridors near the bay. Dispatch and scheduling are coordinated from our San Francisco Bay Area office, but the crew that shows up is local to Hayward.
Gate Motor & Opener in Hayward
When a gate motor quits in Hayward, you want someone who knows why it quit. The answer is rarely just the motor. We run calls all over Hayward, from the flatlands of 94541 and 94544 to the Hayward Hills in 94542, and the failure pattern changes by zip code. Salt fog eats operator boards near the bay. Fault-line creep tilts posts in the hills. A rebuilt motor bolted onto a leaning post won’t last six months. That’s what we fix.
Motor Repair
Most motor repair calls in Hayward aren’t motor failures. They’re limit switch drift, corroded terminal blocks, or a safety photocell that’s read out of alignment too many times. A basic swing gate motor repair here typically runs $240 to $420, depending on whether it’s a limit switch, a capacitor, a control board, or a corroded terminal block. We repair motors on site when we can, rebuild arms and racks when they’re worn, and recalibrate everything to spec before we leave.
Motor Installation
Installing a gate motor in Hayward means choosing equipment that can stand up to this coast. In 94544 and 94545, we spec galvanized and stainless fittings wherever we can because salt-laden marine fog off the bay corrodes painted steel hardware years faster than it would inland in Fremont or Castro Valley. Motor installation on a standard driveway swing gate in Hayward usually lands between $1,100 and $2,300 for a single operator, installed.
Slide Motor Service
Slide gate motors in Hayward run on rail systems and rack-and-pinion drives that demand straight posts and clean rail alignment. Slide motor installations run $1,600 to $3,200 because the rail, rack, and post work matter as much as the motor. Post re-plumbing and reboring in the 94542 hills, where fault creep is a factor, adds $180 to $450 to a repair depending on what’s shifted.
Why does my gate motor in the Hayward Hills keep going out of limit even after I reset it?
Because the post has likely shifted. The Hayward Fault runs through the 94542 hills, and slow ground creep tilts post footings by fractions of an inch over months, which knocks limit switches and safety photocells out of calibration. Resetting the limits without re-plumbing the post just stores up another call. Call (877) 610-2993 and we’ll check the post before anything else.
How often should I replace the safety photocells on a gate opener near the Hayward bay shore?
In 94544 and 94545, expect to replace photocells every 4 to 7 years, not the 10 to 12 years you’d see inland. Salt-laden marine fog off the bay corrodes the lenses, wiring, and internal contacts. We inspect and test entrapment protection on every call. Call (877) 610-2993 and we’ll tell you if yours are still reading clean.
Gate Access Control in Hayward
Gate access control in Hayward typically costs $350 to $2,800 depending on the system. If your keypad stopped accepting the code, your phone entry box quit buzzing visitors in, or the card reader only works when it feels like it, we can usually have your gate working again the same day or next. We know Hayward’s access control quirks because we’ve been fixing them across the flatlands and the hills for a long time.
Keypad Entry
A keypad that’s dead, flickering, or eating codes is the most common access control call we get from Hayward homeowners. Sometimes the board is fried from a power surge. Sometimes the ribbon cable corroded from bay moisture. A new keypad in Hayward usually runs $350 to $750 installed.
Phone Entry Systems
Phone entry systems that buzz a phone when a visitor arrives are common on Hayward’s larger hillside properties where the house sits well back from the gate. These systems fail in predictable ways here: moisture intrusion in the call box, blown relays, dead power supplies, or programming that reset after a PG&E brownout. Expect $500 to $2,200 depending on the system.
Card Readers and Fobs
Card readers and fobs are heavier on the commercial side of Hayward, especially in the warehouse corridors near the bay and smaller business parks. Reader replacement in Hayward typically runs $400 to $1,300. We install and service card readers, set up fob systems, and integrate them with the operator so gate access control works the way it should.
How fast can you get to my house in Hayward?
Most Hayward calls get same-day or next-day service. If you call before noon, we can often have someone there that afternoon. Emergency calls, like a gate stuck open with a keypad that won’t respond, get priority. Call (877) 610-2993 and we’ll tell you exactly when to expect us.
Can you come today to fix my gate keypad in Hayward?
In most cases, yes. Keypad replacements and reprogramming are quick jobs, and we carry the common parts on the truck. Call us before early afternoon and there’s a good chance it’s fixed today. Call (877) 610-2993 for a straight answer on today’s schedule.
Gate Parts & Welding in Hayward
Most gate failures in Hayward aren’t motor failures at all. They’re hinge failures, post failures, and cracked welds that get misdiagnosed as operator problems. A sagging gate in the Hayward Hills off Skyline Boulevard usually traces back to the hinge post, not the gate leaf, and the fix starts with a level and a weld, not a new opener. We do the welding on site, in your driveway, so the gate never leaves your property.
Hinge Replacement
Hinge replacement in Hayward starts with the post, not the hinge. In the hillside 94542 zip along the fault trace, posts drift out of plumb from ground creep, and screwing a new hinge onto a leaning post just means you’ll do the job twice. Hinge replacement runs $180 to $420 per gate.
Post Replacement
Older Hayward homes, the 1950s through 1970s tract houses in the western flatlands, often have original post footings that are too shallow or too narrow for the gate hanging on them today. Add fault creep in the hills, and post replacement becomes a standard service call. Post replacement in Hayward typically runs $350 to $800 per post.
Custom Welding
Some Hayward gates were built by a guy with a stick welder in 1972, and nobody makes replacement parts for them anymore. That’s where our welding work comes in. Custom welding jobs in Hayward run $150 to $500 depending on the piece. We fabricate hinge brackets, receiver plates, latch strikes, and gate leaf extensions, all on site.
Why does my automatic gate in the Hayward Hills keep losing its safety sensor alignment even though nobody hit it?
Because the ground under your gate post is moving. The Hayward Fault runs directly through the 94542 hillside neighborhoods, and its slow ground creep tilts posts out of plumb by small amounts year after year. A post that leans one degree is enough to shift the gate leaf out of the photocell beam path. The fix is re-plumbing the post, not replacing the sensor.
Can you weld a sagging wrought-iron swing gate on my 1960s Hayward flatlands home, or does the hinge post need replacing first?
Depends on what the post is doing, and we’ll tell you before we weld anything. On a 1960s flatlands gate, the post itself is often still sound, but the hinge brackets and pin holes have worn or corroded after 50-plus years near the bay. In that case, we weld new brackets on and re-drill. If the post is leaning or its base is rusted through, welding the panel won’t fix the root cause.
Brands We Service in Hayward
We service FAAC, BFT, Linear, and Viking operators, and we keep common parts for all four on the truck when we’re working Hayward. That means most repairs happen in one visit, not two. You can see our full list of brands we service.
Pricing for Gate Repair in Hayward, CA
| Service | Typical range in Hayward |
|---|---|
| Diagnostic service call | $150 - $300 |
| Post re-plumbing and re-anchoring | $350 - $700 |
| Hinge replacement | $180 - $420 |
| Post replacement | $350 - $800 |
| Rail repair | $250 - $650 |
| Custom welding | $150 - $500 |
| Wood gate rebuild | $400 - $900 |
| Basic swing gate motor repair | $240 - $420 |
| Motor installation (single swing operator) | $1,100 - $2,300 |
| Keypad replacement | $350 - $750 |
| Phone entry system | $500 - $2,200 |
| Card reader replacement | $400 - $1,300 |
What pushes price up in Hayward is usually the ground or the salt air. Fault creep in 94542 means more post work before any operator or hinge job, and bay fog in 94544 and 94545 means we’re replacing corroded hardware more often. Whatever the number, you get it quoted and agreed before we start. Period.
Neighborhoods We Serve in Hayward
Our trucks are in and out of Hayward daily, and we know the streets by name, not just by GPS. Most repair calls are answered the same day.
- Burbank
- Glen Eden
- Hayward Highland
- Mission-Foothill
- Tennyson-Alquire
Service Area - Cities Near Hayward
We work throughout the East Bay and regularly serve Hayward, CA along with the surrounding communities. You’ll find us in Fairview, Cherryland, Castro Valley, Union City, and San Lorenzo. If you’re nearby, give us a call at (877) 610-2993.
Serving Hayward, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Hayward and the communities around it; dispatch is coordinated from our San Francisco Bay Area office. The map shows the Hayward coverage area; if your address is on it, we can help.
Also serving nearby: Hayward, CA, Fairview, CA, Cherryland, CA, Castro Valley, CA, Union City, CA, San Lorenzo, CA.
FAQs About Gate Repair in Hayward
Most Hayward repair calls are answered the same day, especially if you call before early afternoon. Emergency calls, like a gate stuck open or a security gate that won’t close, get priority scheduling. Call (877) 610-2993 and we’ll give you a straight answer on today’s schedule.
Most gate repairs and like-for-like replacements don’t require a permit in Hayward. New automatic gate installations with electrical work may need one, depending on scope. We’ll tell you what’s required for your specific job before any work begins. Call (877) 610-2993 and we’ll walk through it.
Yes, estimates are free, and there’s no trip charge inside the county. We’ll come out, look at your gate, and give you a written price before any work starts. If another company has already written you an estimate, bring it to us for a free second opinion. Call (877) 610-2993 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hayward Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield