Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hayward
Gate installation in Hayward runs $1,800 to $6,400 for a typical driveway gate, with pedestrian gates starting around $900. Most jobs take one to two days on site, and we quote the full price before any work begins. If you’re in the Hayward Hills, the flatlands near Tennyson, or anywhere between 94541 and 94545, call us at (877) 610-2993 and a live person picks up. We’ve been putting gates in Hayward driveways long enough to know which questions to ask before we even see the property.
Why Gatewood Fence & Gate Is Hayward’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is still on the door. That matters in Hayward, where a lot of homeowners have been burned by outfits that quote one number over the phone and hand over a different invoice at the curb. Our price is the price, written down, agreed to before the first post hole gets dug.
Hayward customers call us because we answer the phone at 2 a.m. the same way we answer at 2 p.m. A live person, every time. Not a menu tree. Not a callback. For over two decades, the same owner has been showing up to Hayward job sites, and if something isn’t right, the 90-Day Done Right Promise means one call brings him back. No runaround, no “that’s not covered.” If it’s not done right, we make it right. In writing, on every job.
We also know the ground under Hayward. That’s not a slogan. The Hayward Fault runs right through the hills, and the soil creep up there does things to gate posts that nobody in Fremont or San Leandro deals with. When a swing gate in 94542 starts binding or the operator faults out, we check the post before we touch the motor. That local knowledge saves Hayward homeowners from paying for a new operator when the real fix is re-plumbing a tilted post.
Our Gate Installation Services in Hayward
Sliding Gate Installation in Hayward
Sliding gates get specified in Hayward more than almost anywhere else in the East Bay because so many driveways here are tight. On a shared driveway in the hills, a swing gate that arcs across a neighbor’s right-of-way is a lawsuit waiting to happen. A slide gate hugs the fence line and uses the space you already have. We install cantilever and track-style slide gates, set the rack and pinion on compact operators, and mount safety photocells so the gate won’t close on a car, a kid, or a delivery person.
In the flatlands around 94544 and 94541, driveways off streets like Foothill Boulevard and Tennyson Road often have steep cross-slopes or fences butted right up against the paving. A swing gate there binds on the uphill side. A sliding gate rides level. We build the rail, set the operator, and handles the power run with the same crew start to finish. No subcontracted mystery workers.
Swing Gate Installation in Hayward
Swing gates are still the right call for a lot of Hayward homes, especially in the Hayward Hills where driveways are wider and the architecture leans toward wrought iron. We fabricate single and double swing gates, weld on site, and match the existing fence so the new gate doesn’t look like an afterthought. When the old gate is worth saving, we’ll tell you that too. Hal would rather repair a well-built gate than sell you a new one.
One thing we always do in 94542: we inspect the hinge post footing before we hang a new gate on it. Fault creep up there cracks concrete and tilts posts out of plumb. Hang a heavy gate on a tilted post and you’ll be calling us back in six months. We re-anchor first, then hang. That’s the order that makes a gate last.
Driveway Gate Installation in Hayward
Driveway gates carry the most load and get operated the most times per day, so we treat every driveway gate installation in Hayward as a structural job first and an automation job second. We set posts in concrete below grade, weld the hinges, hang the gate, and then dial in the opener. When it’s automated, we program the limits, set the force sensitivity, and mount entrapment protection per current California code. The gate should stop and reverse if it hits resistance. That’s not optional.
For Hayward homeowners who want keypad entry or a call box at the curb, we handle that too. DoorKing, Ghost Controls, Linear, Viking. We stock parts for all of them, so a service call doesn’t turn into a two-week wait for a board to ship from somewhere.
Pedestrian Gate Installation in Hayward
A lot of Hayward side yards need their own gate so the driveway gate isn’t cycling open every time someone walks to the back. We install pedestrian gates matched to the fence line, with self-closing hinges where code requires it, and latches that hold up to the salt fog near the bay. Plain steel hardware rusts fast in 94544 and 94545. We use coated or stainless components by default, not as an upsell.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hayward
We’re certified to work on nine major gate brands, including DoorKing, Viking, Ghost Controls, and Linear. If your Hayward gate already has an operator from one of those manufacturers, we can service it, reprogram it, or integrate it with a new gate. If it’s failed and beyond saving, we’ll tell you straight and recommend a replacement that fits your gate weight and cycle count. We keep common boards, remote transmitters, photocells, and limit switches on the truck, because driving back to the shop for a part wastes your afternoon and ours. Most Hayward repair parts are installed same-visit.
Common Gate Installation Problems We See in Hayward Homes
- Fault-line post tilt in the Hayward Hills (94542). Ground creep along the Hayward Fault slowly moves the soil, and a gate post set in moving soil tilts out of plumb. The gate starts binding at the latch, the operator faults, and the homeowner thinks the motor died. The fix is re-anchoring the post footing, then re-checking the operator limits.
- Salt-fog corrosion near the bay (94544, 94545). Marine fog off the bay carries salt that eats uncoated hinges, latch springs, and operator enclosures. A gate that worked fine for five years in Castro Valley starts rusting through in three years here. We spec coated hardware and sealed enclosures for any Hayward install west of the 880.
- Shared driveways with no swing clearance. In older Hayward neighborhoods, driveways run side by side with a property line down the middle. A swing gate swinging out across the neighbor’s side is a non-starter. Slide gates solve it, and the safety photocells go on both sides of the opening so the gate can’t close into a driveway that isn’t yours.
- Old tract-home gates from the 1950s through 1970s. The western flatlands are full of wood-post and chain-link gates that have been sagging since Reagan was president. The post rots at ground level, the gate drags, and the hinges pull out. We replace the post in concrete, re-hang the gate, and weld or bolt new hardware. When the panel is still good, that’s all it needs.
Pricing for Gate Installation in Hayward, CA
A pedestrian gate in Hayward typically runs $900 to $2,200 installed. A single driveway swing gate runs $2,200 to $4,800 depending on width, material, and whether it’s automated. A sliding gate, which needs a rail and often a steel frame, starts around $3,200 and goes up to $6,400 with a compact operator and safety photocells. Double gates cost more because you’re hanging twice the weight and often adding a second operator or a slave leaf setup.
What moves the number is post depth, material choice, and whether we’re running power to the gate. We quote the full price before any work starts, and that number doesn’t change at the end of the job. Seniors and veterans get 10% off permanently. We also knock $40 off any repair over $200, and there’s no trip charge anywhere in Alameda County. Call (877) 610-2993 and we’ll give you a real number over the phone, then back it up in writing.
We Also Serve Cities Near Hayward
Our Gate Installation team covers all of Hayward and the surrounding communities. If you’re in Fairview, Cherryland, Castro Valley, or Union City, we’re already running crews through your neighborhood. Same crew, same pricing, same 90-Day Done Right Promise. Gate Installation in Hayward is what we do every day, and the neighboring cities get the same attention.
Serving Hayward, CA - Our Local Coverage Area
We’re based in the Hayward area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Hayward
The Hayward Fault runs directly under the 94542 zip code, and its ongoing ground creep slowly shifts the soil around your gate posts. That movement tilts the hinge post out of plumb, which makes the gate bind and the operator’s limit switches drift out of calibration. Re-anchoring the post footing is the fix, and it has to happen before any operator recalibration will hold. Call (877) 610-2993 and we’ll check the post before we touch the motor.
Usually not. Most shared driveways in the 94541 and 94544 flatlands don’t have enough side clearance for a swing gate to arc without crossing a property line or hitting the neighbor’s fence. A sliding gate rides along the property line and needs no swing arc, which makes it the right solution for those tight shared-driveway situations. We’ll measure the setback and tell you honestly which one fits.
California code requires entrapment protection on every automatic gate, which in practice means monitored safety photocells across the gate opening and a force-sensing operator that stops and reverses if the gate hits resistance while closing. On a new automated install in Hayward, we mount the photocells, set the force limits, and test the reverse function before we call the job done. It’s a safety requirement, not an optional add-on.
The western Hayward zip codes, 94544 and 94545, sit right on the bay shore and get persistent marine fog from June through September. That fog carries salt, and salt accelerates rust on raw steel hinges, latch springs, and operator enclosures much faster than inland East Bay locations. We use coated or stainless hardware and sealed operator enclosures on any Hayward install west of the 880, which roughly doubles the hardware life compared to uncoated steel.
Yes, and sooner than later. The cracked footing means the post has already started moving, and once it’s out of plumb, the gate will bind, stress the hinge welds, and eventually fault the operator. Running it now just accelerates the damage. Re-anchoring the post in fresh concrete is a one-day job for us, and it’s cheaper than replacing a burned-out operator and a bent hinge frame later. Call (877) 610-2993 for a free estimate.
Contact Gatewood Fence & Gate for Gate Installation in Hayward, CA
If you need a new gate in Hayward, or you’re tired of fighting the one you have, call us. Hal will answer or call you back from his own phone. We’ll set a time that works, show up on that day, and give you a written price before anything gets cut or dug. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Call (877) 610-2993 today for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hayward and the East Bay since 2001.