Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hayward
Gate repair in Hayward usually falls into two buckets: a gate that won’t open, or a gate that won’t stay where you put it. Most Hayward calls we run are diagnosed and fixed the same day. If you live off Mission Boulevard, up in the Hayward Hills, or down in the flatlands near the bay, you already know the ground here doesn’t always cooperate with gate posts. Call (877) 610-2993 and you’ll get a live person who can tell you what we’re seeing in your part of town.
Why Gatewood Fence & Gate Is Hayward’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is still on the door with the address published for anyone who wants to look him up. The person who answers the phone is the same person who stands behind the work. When we tell a Hayward customer we’ll be there Tuesday between nine and eleven, we mean it. If something’s not right after we leave, the 90-Day Done Right Promise is in writing: one call brings us back, no runaround.
Hayward customers call us because the problem actually gets fixed, not patched. We weld on site, in your driveway, instead of hauling your gate to a shop two towns over. If a hinge post leans or a weld cracks, we fix the post and re-weld the steel right where it stands. That matters here, because a gate that sags into the dirt off a 94542 hillside driveway isn’t going to hold up with a shim and a shrug. Gate Repair is what we do, and we’ve done enough of it in Hayward to recognize a fault-line post shift before we even get out of the truck.
We’re locally owned and owner-operated. Scheduling is coordinated from our San Francisco Bay Area office, but the trucks that roll into Hayward are crewed by background-checked, uniformed technicians who work this area regularly. Hal signs every invoice himself. You can take his word for it, or you can drive to the shop and look him in the eye.
Our Gate Repair Services in Hayward
Gate Realignment
Hayward gates go out of alignment more than almost anywhere else in the East Bay, and it’s not because people install them wrong. The Hayward Fault runs under the hillside neighborhoods in 94542, and the ground moves slowly, constantly. That creep tilts hinge posts a degree or two, which is enough to make a gate drag, bind, or refuse to latch. We re-plumb the post, rebore the hinge hardware, and realign the gate so it swings and closes the way it did when it was new. In Hayward, realignment is usually the job, not an add-on.
Hinge & Post Repair
In the flatland tract-home neighborhoods around 94541 and 94544, the gates are often original to 1950s and 1960s builds. The wood has decades on it, and the hinges have spent those decades in salt-laden marine air off the bay. We cut out seized or rusted hinge hardware, reinforce or replace the post if it’s soft at the base, and mount new hardware that’s sized for the weight of the gate. Fix the panel without the post and you’ll fix it twice. We’d rather fix it once.
Electric Gate Repair
Automatic gates in Hayward do more work than in inland cities. They open and close in salt air, on sloped terrain, through temperature swings from 40-degree fog mornings to 90-degree hill afternoons. Operators, limit switches, safety sensors, loop detectors: all of it takes abuse here. We service LiftMaster, FAAC, BFT, and pretty much every other major brand, and we keep the common parts for Hayward jobs on the truck so we don’t have to drive back to the shop and leave your gate stuck open overnight. A gate that stops responding to its remote is usually a sensor or a limit switch, not doom. We find it, replace it, and test the cycle before we leave.
Automatic Gate Repair
Same-day service is the standard here, not the exception. If your gate motor in 94542 is grinding, humming without moving, or cycling only halfway, call us. We carry diagnostics for all the mainstream brands and we wire repairs to the local condition, not just the schematic. That matters in Hayward because a motor that tests fine on a bench may still fail in the driveway if the post it’s mounted to is creeping out of plumb. We check the operator, the structure, and the calibration as one system.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hayward
We’re certified to work on nine major gate brands, but the ones we see most often in Hayward are LiftMaster on residential swing and slide gates, FAAC and BFT on hillside estate gates, and Viking and Linear on commercial and fleet-yard operators near the industrial corridors. We service all of them, and we are not loyal to any one brand. We’re loyal to what works on a Hayward driveway, in Hayward soil, with Hayward fog eating at the hardware. If a Linear board is fried and a FAAC retrofit makes more sense than another board, we’ll tell you that before we quote it.
Common Gate Repair Problems We See in Hayward Homes
- Fault-line post creep in 94542. The Hayward Fault runs directly beneath the hillside neighborhoods, and the ground shifts slowly enough that you don’t feel it, but your gate post does. A post that’s leaned two inches out of plumb will throw the safety sensors, the limit switches, and the latch alignment all at once. We re-anchor the post first, then recalibrate.
- Salt-fog rust in 94544 and 94545. Western Hayward sits right on the bay, and the marine layer deposits salt on everything metal. Hinges seize, latches corrode, and operator housings rust through years earlier than they would in Castro Valley. Weld repair and hardware replacement on rusted components is a regular part of our Hayward week.
- Shared-driveway slide gate failures. In dense west Hayward neighborhoods, two or three houses often share a single narrow driveway. A swing gate won’t physically open there, so the gate is a slide gate with a rack and pinion. When the rack gets bent, the rollers wear out, or the solar opener loses its charge, the gate stops moving. We repair slide gate hardware in place.
- Warped wood on hillside-facing gates. Hayward Hills properties get sharp temperature swings and dry heat on the exposed faces, so wood gate boards check and warp over time. That warping throws off latching geometry and puts uneven load on the hinges. We straighten, brace, and rebore what we can, and replace what we can’t.
Pricing for Gate Repair in Hayward, CA
Here are real numbers for Hayward work. A basic gate realignment typically runs $150 to $280, depending on how far the post has moved and whether we’re resetting the concrete. Hinge and hardware replacement on a wood gate runs $180 to $350, including new hardware and re-hanging. Electric gate diagnostics and repair run $220 to $540, depending on the component: a failed safety photocell might be $180 to $240 all-in, a replacement limit switch $90 to $160, a full operator swap $600 to $1,400 on a residential gate in the hills. Weld repair on a rusted steel gate typically runs $180 to $400 per repair point.
Every price is quoted and agreed before any work starts, in writing. You will not open the invoice and find a different number than the one we discussed. Estimates are free, there’s no trip charge inside the county, and we knock $40 off any repair over $200. If you’re a senior or a veteran, tell the person on the phone and you get 10% off everything, permanently. Call (877) 610-2993 for an exact number on your gate.
We Also Serve Cities Near Hayward
If you’re in Fairview, Cherryland, Castro Valley, or Union City, you’re close enough that we handle those calls with the same local knowledge and the same live-person phone answer. Gate Repair in Hayward often means work on the shared driveways and hillside lots that blur across city borders, so we treat those neighbors the same way we treat Hayward: show up when we say, fix the actual problem, and stand behind it.
Serving Hayward, CA - Our Local Coverage Area
We’re based in the Hayward area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hayward
Because the ground under it is moving. The Hayward Fault runs through the 94542 hills, and slow ground creep tilts gate posts a little more every year. Each small shift throws off the operator’s limit switches, safety sensor alignment, and latching geometry. Recalibrating the motor without re-plumbing the post means you’ll redo the same repair in six months. We fix the post first. Call (877) 610-2993 if you want us to check yours.
Yes. Shared driveways in west Hayward usually need slide gates because a swing gate would hit a car or a wall. We repair the rack, rollers, motor, and track in place, including solar opener setups where there’s no power line close enough. If you need it, we can also quote the power run and safety edges to bring an existing slide gate up to code. Estimates are free.
Most of the time, it’s worth fixing. If the wood is sound and it’s only the hinges and latch hardware that have corroded from bay fog, we replace the hardware with stainless or galvanized parts for $180 to $350 and the gate goes back into service for years. If the wood is soft or split at the hinge points, we’ll tell you that too, and we won’t sell you hardware that’s going to tear out. The repair-first approach means we recommend replacement only when the wood itself is done.
If the gate has an automatic opener, yes. Under California law, automated gates must have entrapment protection: that means safety edges, photocells, or an inherent reversing mechanism, depending on the gate type and location. A simple manual swing gate with no motor doesn’t need them. If you’re not sure what applies to your gate, call us and we’ll look at it during a free estimate.
Yes, and this is one of the most common Hayward calls we run. We remove the old footing, re-anchor the post with new concrete, rebore the hinge hardware, and realign the gate so it operates cleanly. A cracked footing in 94542 usually means fault creep or soil settlement, not bad original work. We fix the structure before we touch the motor or hinges. Call (877) 610-2993 for a free written estimate.
Call Gatewood Fence & Gate for Gate Repair in Hayward
If your gate is sagging, seized, or refusing to open, call (877) 610-2993. A live person answers, day or night. We’ll give you a straight answer, a free estimate, and a time we’ll actually show up. Hal Gatewood has been fixing gates since 2001, and the 90-Day Done Right Promise is on every invoice in writing. If it’s not done right, one call brings us back. No call center, no back-and-forth, no invoice surprises. Call us, or drive to the shop and look us in the eye. Either one works.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hayward and the East Bay since 2001.