Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Eagle Mountain
Gate motor and opener problems in Eagle Mountain usually come down to two things: a post that has shifted in the black clay, or an operator that has spent one too many summers baking in the Texas heat. We fix both, and we do it without trying to sell you a brand-new gate. Call (877) 610-2993 and you’ll get a live person who knows the difference between a soil problem and a board problem. Hal Gatewood has been at this since 2001, and his name is on the shop.
Why Gatewood Fence & Gate Is Eagle Mountain’s Preferred Gate Motor & Opener Company
We work on more estate-style gates in the 76179 ZIP than most companies see in a year. Eagle Mountain’s large-lot homes off Peden Road, along the coves, and back toward the Saginaw line carry a lot of automatic iron swing gates and tube-steel slide gates, and those gates sit on expansive clay that never stops moving. That pattern shapes how we diagnose. Most gate opener fault codes around here trace back to a post that has crept out of plumb, not a motor that suddenly gave up.
Our Gate Motor & Opener crew services nine major brands, including Linear, Viking, and Ghost Controls. We stock the boards, arms, and solar components that make sense for this specific market rather than waiting on a parts house in Dallas. When you call about a gate that binds halfway through its travel, the person who answers understands that a 2-inch post shift off a caliche pad can throw a rack-and-pinion out of alignment faster than any wind storm.
We answer the phone around the clock, and the person who shows up is background-checked and wearing a uniform that says Gatewood. You can call the office, or you can drive to the shop and look Hal in the eye. He’s been repairing gates in this region for over 29 years, and he’s not passing through.
Our Gate Motor & Opener Services in Eagle Mountain
Motor Installation
A new opener on an Eagle Mountain driveway has to handle wide panels, long arms, and soil that will try to push the posts around within a couple of seasons. We size the operator to the actual gate weight and span, confirm the post footings before mounting anything, and set the travel limits in front of you. You get a written price before the first bolt comes out, and the work carries our 90-Day Done Right Promise in writing.
Motor Repair
Most repair calls in Eagle Mountain start with a fault code nobody can read or a motor that hums but won’t move. We trace the actual cause instead of throwing a control board at it and hoping. On a long driveway off Peden Road, we found a LiftMaster operator faulting repeatedly because the hinge post had shifted in the clay. We reset the post footing, re-plumbed the post, re-engaged the rack, and tested the loop detector and safety photocells. That customer kept a $3,000 operator running for the cost of a post reset.
Linear Motor Service
Linear operators are common on the custom homes built near Eagle Mountain Lake, and they are good units until the arm fights a binding hinge. We rebuild gear assemblies, replace limit switches, and dial in force settings so the operator isn’t working against a racked gate. If the board is fried from UV, we quote the replacement honestly and install it the same week.
Slide Motor Repair & Installation
Slide gates on the acreage side of Eagle Mountain take real abuse. Wind off the lake pushes the panel, cattle or horses lean on the frame, and the rack gets knocked around by rutted driveways. We align the rack to the pinion, set the V-guides, and verify the reverse loop so the gate doesn’t crush a vehicle on the driveway edge. Slide motor work in Eagle Mountain gets a full photo walkthrough before we punch any invoice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Eagle Mountain
We are certified to work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Eagle Mountain, the brands we see most are Linear, Viking, Ghost Controls, and DoorKing, simply because builders in the lake communities leaned on those names for the original installations. We keep common boards, photocell sets, and solar components in local stock, which means a repair doesn’t stall out waiting on a parts van from Grand Prairie.
Common Gate Motor & Opener Problems We See in Eagle Mountain Homes
- Post shift shuts the gate down. Expansive black clay in the 76179 ZIP heaves with the wet-dry cycle. A post can move 2 to 3 inches out of plumb in two or three seasons. The gate still looks fine. The motor knows it’s not fine and faults out.
- UV-baked control boards and photocell wiring. Summer heat over 100°F and open lakeside exposure cook circuit boards and degrade the plastic connectors on safety wiring. We open the control box and show you the cracked board before quoting a replacement, because you should see what you’re paying for.
- Wind load fighting undersized operators. Sustained lake winds push on wide estate gates. When the original operator was sized for a lighter suburban panel, the motor burns out its gear assembly early. We check the actual gate weight against the operator rating before anything else.
- Ice events snapping actuator arms. Hard North Texas ice storms can freeze a solenoid lock or shear the actuator arm on a long driveway opener. When that happens, we see a rush of calls from the rural fringe where gates were winterized for Fort Worth but not for a three-day freeze.
Pricing for Gate Motor & Opener in Eagle Mountain, TX
A typical gate opener motor repair in Eagle Mountain runs $180 to $340 for limit switch replacement, gear rebuild, or board diagnosis. Full operator replacement, installed, ranges from $1,100 to $3,200 depending on the gate weight, the span, and whether you need a solar package. Slide motor setups on wide farm gates usually land between $1,500 and $3,800. Battery backup adds $400 to $900 on most estates. Every price is quoted and agreed upon before any work starts, so the number we hand you is the number on the invoice.
We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate on gate motor work in Eagle Mountain.
We Also Serve Cities Near Eagle Mountain
Beyond Eagle Mountain, we run service calls to Eagle Mountain neighbors in Saginaw, Azle, Briar, and River Oaks. Same crew, same pricing, same live person on the phone. If your gate is acting up just across the line, the drive time is short and the repair is the same.
Serving Eagle Mountain, TX - Our Local Coverage Area
We’re based in the Eagle Mountain area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Eagle Mountain
If the motor hums but the gate stalls or trips a force limit, the post has usually shifted out of plumb first. In Eagle Mountain’s 76179 clay, we check post plumb before condemning any operator. Call (877) 610-2993 and we’ll diagnose it on site, not over the phone.
You can run mains power, but many long-driveway entrances in the 76179 ZIP sit far enough from the panel that trenching costs more than the operator itself. Solar is often cheaper. We quote both options with real numbers so you can decide.
It is usually a wind-load problem: the operator is sensing resistance from a panel fighting the lake breeze and reverses for safety. We test the force settings and the photocell alignment before changing anything. Call (877) 610-2993 for an exact answer.
Twice a year. The heat and the clay soil work on these systems constantly, and a post that is 1 inch out in April will be 2.5 inches out by October. A spring and fall inspection catches the shift before it takes out the operator.
Your opener must have a primary entrapment sensor, typically a reverse loop or contact edge, plus photocells across the gate opening. We test both on every repair and install. This is a safety system, not an add-on.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Eagle Mountain since 2001.