Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Eagle Mountain
Gate installation in Eagle Mountain runs between $2,400 and $9,800 for most residential jobs in the 76179 ZIP, with wide acreage double gates and solar-powered systems at the upper end. The biggest problem in this market isn’t the gate itself. It’s the post footing. Eagle Mountain’s expansive black clay heaves and contracts with every rain and dry spell, so a post set too shallow will shift out of plumb within two or three seasons. We design every footing for that movement from day one. Call us at (877) 610-2993 and we’ll measure your entrance, look at the soil, and give you a written price before any work starts.
Key Takeaways:
- Most Eagle Mountain gate installations cost $2,400-$9,800, depending on width, power, and post conditions.
- Clay heave under shallow footings is the number one cause of premature gate failure in 76179.
- Solar openers work on long rural driveways when sized with dual batteries and enough panel wattage.
- We quote the job up front, in writing, and the number doesn’t change at the door.
Why Gatewood Fence & Gate Is Eagle Mountain’s Preferred Gate Installation Company
Hal Gatewood started this company in 2001, and he still runs it the way he talks: straight. The name is on the shop, the shop is down the road, and the person who answers the phone is the same person who will show up to your gate. We’ve been installing driveway, swing, slide, and pedestrian gates across Eagle Mountain long enough to know which posts stay plumb and which ones don’t.
What Eagle Mountain homeowners tell us matters most is that the price we quote is the price they pay. It is. We put the number in writing before we dig the first hole, and the 90-Day Done Right Promise comes on every invoice, not as fine print. If something isn’t right, one call brings Hal back. No runaround, no voicemail queue, no three-state call center. A live person answers around the clock.
We also know the difference between a gate that works for a season and one that works for fifteen years. That starts with how the post goes into Eagle Mountain clay. We weld on site. We don’t haul gates off to some warehouse and bring them back three weeks later. Most of our Eagle Mountain work is done with the gate lying in your driveway, rebraced, re-hung, and cycled before we leave.
Reviews from Eagle Mountain customers lean on the same three things: we showed up in the window we promised, the gate still opens smoothly a year later, and nobody tried to sell them parts they didn’t need. We carry standing offers that don’t require negotiation: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Say the word and it’s applied.
Our Gate Installation Services in Eagle Mountain
Driveway Gate Installation
Driveway gates in Eagle Mountain tend to be wide. That’s just how the lots are laid out around the lake and along the rural fringe. We install steel and ornamental iron driveway gates from 10-foot singles up to 24-foot doubles, with the hinge posts set deep enough in the clay that the gate doesn’t drag within two years. Every driveway gate quote includes the post footing designed for 76179 soil, because that’s the part that fails first when someone skips it.
Pedestrian Gate Installation
A pedestrian gate next to a wide driveway gate is common on Eagle Mountain lake-access and acreage properties. It lets people walk in without cycling a 500-pound automatic gate every time. We install matching pedestrian gates on the same keypad system so the property owner has one code for the walk gate and the drive gate. The walk gate post gets the same clay-heave footing treatment as the big gate, just scaled to the smaller panel.
Sliding Gate Installation
Sliding gates make sense on long driveways where a swing gate would sweep across too much of the yard or where the driveway slopes. Long, heavy slide gates need a properly rated operator and a track bed that won’t shift when the clay does. We’ve seen plenty of Eagle Mountain slide gates with loop detectors wired into caliche-laced soil that read false occupancy when the ground shrinks in drought, leaving the gate stuck open or refusing to close. We account for that on the install, not after it fails.
Swing Gate Installation
Swing gates are the classic Eagle Mountain look, especially on custom and semi-custom homes built from the mid-2000s onward. Single and double swing gates, ornamental iron or tube steel. The weak point is always the hinge post. A gate sags in the hinge post, not in the middle, and that’s where we start. We set swing gate hinge posts in a 4-foot concrete footing with extra rebar for clay heave. Fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Eagle Mountain
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we keep common parts for all of them on the truck when we roll into Eagle Mountain. If you’ve got an existing opener that’s still in good shape, we’ll match the gate to it rather than trying to sell you a whole new system. For new installs, we lean on Linear, Viking, Ghost Controls, and DoorKing for acreage applications because they hold up under sustained wind loading off the lake and 100-degree summer heat. Parts that aren’t on the truck are usually in the shop the next day.
Common Gate Installation Problems We See in Eagle Mountain Homes
- Clay heave pushes the hinge post out of plumb. A shallow footing can’t hold against Eagle Mountain’s expansive black clay. Within two to three seasons, the swing gate drags on the latch side or the operator arm binds. We set posts in a 4-foot concrete footing with extra rebar specifically for this soil, because a new gate that heaves is a warranty claim waiting to happen.
- Solar openers sized for urban duty cycles fail on rural driveways. A 16-foot double gate off Morris Dido-Newark Road can cycle 20-plus times a day in summer. A small solar panel and single battery can’t keep up, and the gate dies with the battery. We size the panel and battery bank for the actual cycle count, not a suburban average.
- Loop detectors false-trip in caliche-laced soil. Clay shrinkage around the saw cut creates micro-cracks that send false occupancy signals, leaving a slide gate stuck open or refusing to close. We address this at installation with the right saw-cut depth, sealant, and loop configuration for Eagle Mountain’s soil profile. Show me the gate closing on its own and I’ll show you where it’s failing, and it’s usually the loop.
- Wide farm-style double gates sag under their own span. A 14- or 16-foot double gate carries a lot of weight, and the latch-side post takes the load. Add wind loading off the lake and the gate loses its rectangle within a couple of seasons if the posts aren’t engineered for the span. We build double gates with enough steel and the right post depth for the gate’s actual weight, not a catalog guess.
Pricing for Gate Installation in Eagle Mountain, TX
A typical single swing driveway gate in Eagle Mountain runs $2,400-$4,200 installed, including the post footing engineered for clay heave. A double swing or slide gate for a wide acreage entrance mostly lands between $4,500 and $7,500, depending on width, steel gauge, and finish. Add a solar gate opener with dual batteries and keypad entry and you’re at $7,000-$9,800 on the upper end. The single biggest cost driver on this page is the post footing. That’s not where you want to save $300.
We quote the number up front after measuring the gate, the driveway, the soil, and the power situation. The price is written down and agreed before any work begins. No trip charge inside the county, and a free second opinion on any written estimate if another company already put one in your hand. Call (877) 610-2993 and we’ll come out, look at what you’ve got, and tell you straight what it costs.
We Also Serve Cities Near Eagle Mountain
We work throughout the lake country, too. If you’re in Saginaw, Azle, Briar, or River Oaks, the same crew and the same pricing apply. You don’t need to live inside Eagle Mountain’s 76179 ZIP to get a gate installed right. We coordinate scheduling from our Dallas-Fort Worth office and crews serve Eagle Mountain and the surrounding communities locally. Our Gate Installation team handles everything from single driveway gates to full acreage entrances, and if you’re just outside the boundary, read more about Gate Installation in Eagle Mountain to see if you’re in the service area.
Serving Eagle Mountain, TX - Our Local Coverage Area
We’re based in the Eagle Mountain area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Eagle Mountain
We set hinge posts in a 4-foot concrete footing with extra rebar on every gate installation in the 76179 ZIP. Eagle Mountain’s expansive black clay heaves dramatically with seasonal moisture swings, and posts set in caliche-topped pads over that shifting subgrade routinely move 2 to 3 inches out of plumb within two to three seasons. A 4-foot footing gets below the worst of the movement and the rebar holds the column together when the upper clay wants to move. Skip this and the gate drags before the opener’s warranty expires. Call (877) 610-2993 if you want a footing that won’t heave.
Yes, and it’s the right answer for long driveways where running grid power to the gate would mean a trench half a mile long. We installed a 16-foot tube-steel swing gate on a driveway off Morris Dido-Newark Road with exactly this situation. No power at the entrance. The crew set the hinge post in a 4-foot concrete footing with extra rebar for the clay heave, mounted a Ghost Controls solar gate opener with dual batteries, added a safety photocell across the opening, and finished with a keypad entry for the property owner’s gate code. Nine months later the post is still plumb and the opener cycles through 100-degree heat without a fault. The key is sizing the panel and battery bank for how many times the gate actually cycles, not a suburban guess. Call (877) 610-2993 and we’ll look at your entrance, your tree cover, and your cycle count before we spec anything. Estimates are free.
The answer starts with the post, not the panel. A gate sags in the hinge post, and on a wide double gate the latch-side post takes the full static load plus the wind loading off Eagle Mountain Lake. We set both posts in 4-foot footings with rebar, then size the gate’s steel so it doesn’t rack under its own weight. If the gate is over 14 feet, we’ll often add a center stop post for the two panels to rest against when closed, which relieves the hinge load. We also install adjustable hinge hardware where the design allows, so a minor future adjustment takes ten minutes instead of a re-hang. Call (877) 610-2993 for a quote on your specific gate.
Usually not. Standard residential slide gate operators are rated for panel weight and duty cycle assumptions that don’t hold on an Eagle Mountain multi-acre lot with a long, heavy gate cycling 20-plus times a day. We spec the operator to the gate’s actual weight, the track condition, the wind exposure, and how often it cycles. A gate that’s already been installed with an undersized operator will burn through limit switches and capacitors faster than it should. We’ll tell you if your operator is right for the gate before we sell you anything. Call (877) 610-2993 and we’ll run the numbers with you.
Yes to both. We install pedestrian gates next to driveway gates regularly on Eagle Mountain lake-access properties, where walking down to the water shouldn’t require opening a wide automatic gate every time. Both gates can go on the same keypad system, one code, wired together or wirelessly linked depending on the layout. The pedestrian gate post gets the same clay-heave footing treatment as the driveway gate, just scaled down. We’ll wire the pedestrian gate to the same opener panel where possible, so the property owner only manages one system, not two. Call (877) 610-2993 for a free estimate on the whole entrance, walk gate included.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Eagle Mountain since 2001.