Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Dobbs Ferry
Gate motor and opener repair in Dobbs Ferry runs $240 to $680 for most jobs, with motor replacement on a double swing gate typically landing between $900 and $1,900 depending on the operator and hardware. We can usually get to a Dobbs Ferry driveway within 48 hours for non-emergency calls, and a live person answers the phone around the clock when a gate won’t close and you need someone now. Hal Gatewood has been running this shop since 2001, and the name on the invoice is the same name on the truck that shows up. Call (877) 610-2993 and you’ll talk to a person who knows gates, not a script.
Why Gatewood Fence & Gate Is Dobbs Ferry’s Preferred Gate Motor & Opener Company
Dobbs Ferry gates sit on hillsides that most repair crews in Westchester never learn to read. Clay-heavy soil creeps toward the Hudson on those steep lanes, and that slow downhill movement tilts hinge posts toward the street year after year. A motor bolted to a post that’s three degrees out of plumb will chew through gears and strip rack-and-pinion teeth no matter how new the operator is. We start every Dobbs Ferry job by checking the post before we touch the motor, because fixing the opener without fixing the post means you’ll be calling us again in a year.
We’re from the area, and our Gate Motor & Opener team has spent years on the hillside streets above the Metro-North station, on Chestnut Street, and through the older neighborhoods off Broadway and Ashford Avenue. When you call about a gate in the 10522 ZIP code, the person on the phone knows what you mean when you say the gate binds partway through its swing. We don’t have to look it up. Hal Gatewood owns the shop, his address is published, and the 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, one call brings him back. No runaround, no fine print.
Our Gate Motor & Opener Services in Dobbs Ferry
Motor Installation
A new gate motor in Dobbs Ferry usually runs $900 to $1,900 installed, depending on whether it’s a single or double gate and whether we’re working with slope-compensating hardware. On the hillside driveways along Chestnut Street and the river side of the village, we set operators so the gate clears angled hinges without binding through the full swing. The price is quoted and agreed before any work starts, and that number doesn’t change at the door.
Motor Repair
Most motor repairs in Dobbs Ferry run $240 to $550. That covers replacing control boards, capacitors, limit switches, and gear assemblies on nine major brands. Persistent river fog corrodes uncoated motor housings and circuit boards faster here than in inland Westchester, so we see intermittent opening and complete failures on 1990s operators that look fine from the outside. We’ll tell you honestly when a repair makes sense and when replacement is the cheaper answer over two years.
Linear Motor Service
Linear arm operators are common on Dobbs Ferry’s older stone and brick pilaster gates, where excavating for an underground operator isn’t practical. We service and replace Linear-brand motors, diagnose stripped gears from gates that bind on rusted hinge points, and adjust travel limits for gates that have settled. A linear motor replacement typically runs $600 to $1,200 in Dobbs Ferry.
Slide Motor Service
Slide gates on Dobbs Ferry’s steeper driveways put uneven load on motors when the track settles or the gate panel drags. We see stripped rack-and-pinion gears on slide operators more often here than anywhere else in our service area, because the same soil creep that tilts posts also shifts concrete track pads. Slide motor repair runs $300 to $700, and full slide operator replacement starts around $1,100. We check the track and the wheel assemblies before we condemn the motor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dobbs Ferry
We’re certified to service nine major gate brands, and for Dobbs Ferry customers we stock common parts for Linear, Viking, and Ghost Controls operators locally, which cuts days off most repair timelines. We also work regularly on DoorKing equipment on commercial and multi-unit properties in the village. No brand is too old to look at. If the control board has a part number on it, we can usually source it or cross-reference a replacement.
Common Gate Motor & Opener Problems We See in Dobbs Ferry Homes
- Legacy control boards corroding from river fog. Dobbs Ferry sits directly on the Hudson’s eastern bank, and the persistent moisture gets into uncoated circuit boards on 1990s operators. The gate opens intermittently, then not at all. We can often retrofit a newer board into an older housing and save you a full motor replacement.
- Out-of-plumb hinge posts from downhill soil creep. On the steep lanes toward the river, clay-heavy soil moves slowly downhill every year. Posts tilt toward the street, the gate sags, and the motor strains against misaligned hinges until something strips. We re-plumb and re-core posts before we set new hardware.
- Rust binding at hinge points on ornamental iron gates. Dobbs Ferry’s late-19th and early-20th century homes have beautiful wrought-iron gates that rust where the hinge barrels meet the post. That binding overloads the motor and trips thermal protection on older linear operators. We clean, re-lubricate, and replace hinge pins before the motor dies.
- Freeze-thaw heave on shallow gate post footings. The full Hudson Valley freeze-thaw cycle shifts posts set in shallow footings every spring. A post that moved a quarter inch over winter can throw the gate out of level enough to confuse the limit switches on an automatic opener. We re-bed posts below frost depth when we find this.
Pricing for Gate Motor & Opener in Dobbs Ferry, NY
Here are straight numbers for Dobbs Ferry. Motor repair: $240 to $550. Linear or slide motor replacement: $600 to $1,200. Full installation of a new operator on a single swing gate: $900 to $1,400. Double gate or driveway slide gate: $1,400 to $1,900. Battery backup installation: $350 to $650. Safety photocell retrofit on an older gate: $180 to $400. Every job includes the 90-Day Done Right Promise in writing, and seniors and veterans get 10% off for life. Any repair over $200 takes $40 off. No trip charge inside the county. The price is agreed before we start, and that’s the price on the invoice.
| Service | Typical Dobbs Ferry Price |
|---|---|
| Motor repair (control board, capacitor, limit switch) | $240 - $550 |
| Linear motor replacement | $600 - $1,200 |
| Slide motor replacement | $700 - $1,300 |
| Single swing gate operator installation | $900 - $1,400 |
| Double swing or slide gate operator installation | $1,400 - $1,900 |
| Battery backup installation | $350 - $650 |
| Safety photocell retrofit | $180 - $400 |
We Also Serve Cities Near Dobbs Ferry
We work throughout this stretch of the Hudson Valley. You’ll find our crews in Hastings-on-Hudson, Greenburgh, Irvington, and Hartsdale regularly. If you’re on the border of any of those towns and Dobbs Ferry, call (877) 610-2993 and ask. Dobbs Ferry is our home turf on the river side, and we know these hills better than anyone passing through.
Serving Dobbs Ferry, NY - Our Local Coverage Area
We’re based in the Dobbs Ferry area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Dobbs Ferry
The clay-heavy soil on Dobbs Ferry’s hillside streets creeps toward the Hudson over time, tilting gate hinge posts toward the street and putting uneven load on motors, gears, and hinges. This is the single biggest cause of premature gate motor failure in the village, and it’s why we check post plumb before we touch the operator. Call (877) 610-2993 and we’ll come measure it.
Yes, and we do it regularly on the Victorians and Colonial Revivals above the Metro-North station. The key is setting the post and hinges right first. Mortar erosion and out-of-plumb settling have to be corrected before new hardware goes on. Then we install a modern operator with safety photocells and a battery backup, sized for the gate’s actual weight. Estimates are free, and the price is written down before work starts.
Stripped rack-and-pinion gears from uneven load on the track. The same soil creep that tilts posts also shifts concrete track pads, so the gate drags, the motor strains, and teeth strip. We fix the track and re-set the pads before installing a new motor, otherwise you’ll be replacing gears again in a season. Call (877) 610-2993 for an exact quote.
We use weather-sealed control board enclosures and dielectric grease on all exposed connections, and we coat motor housings where the factory finish is thin. For operators near the water, we recommend battery backup so the gate still cycles during the power flickers that come with river storms. The goal is a motor that runs 15 years here, not five.
Usually not. The sag means the hinge post has moved or the hinge barrels are worn, and the motor is working harder than it should. If we catch it before the gears strip, we fix the post, replace the hinge pins, and the motor keeps running for years. Call (877) 610-2993 and we’ll look at it. Estimates are free.
Call Gatewood Fence & Gate for Gate Motor & Opener in Dobbs Ferry
If your gate isn’t opening right in Dobbs Ferry, call (877) 610-2993. A live person picks up, day or night. We’ll schedule a visit to your driveway, quote the work before anything starts, and put the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and his crews know these hills. No voicemail, no call center, no gate too old to look at.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dobbs Ferry and the surrounding Hudson Valley since 2001.