Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Dobbs Ferry
Gate Installation in Dobbs Ferry means dealing with hills, Hudson River humidity, and a lot of gates that were hung before modern hardware existed. We fix hinge posts that creep toward the street, weld rusted wrought iron back to structural strength, and keep older operators running instead of pressuring you into a full replacement. Gatewood Fence & Gate has been locally owned and owner-operated since 2001, and we come to Dobbs Ferry regularly. If you need a hinge replaced, a post re-plumbed, or a cracked rail welded, call (877) 610-2993 and you’ll get a live person, any hour.
Why Gatewood Fence & Gate Is Dobbs Ferry’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. That is the oldest kind of accountability there is. When we work on a gate in Dobbs Ferry, the person who shows up has been doing this work for over two decades, not a few weeks. We weld on site, in your driveway, so the gate never leaves your property.
Dobbs Ferry has its own set of gate problems, and we have seen most of them more than once. Steep grades, clay soil, river fog, and 100-year-old masonry pilasters. That combination is unusual in Westchester. It means we show up knowing what to look for before we even touch the gate. Our Gate Parts & Welding team carries slope-compensating hinges, heavy-gauge weld stock, and the hardware older Dobbs Ferry gates actually need, not just what is easy to stock.
Every job carries our 90-Day Done Right Promise in writing. If something is not right, one call brings us back, no runaround. We also answer the phone with a live person around the clock. No voicemail, no call center, no chatbot. That matters when your gate will not close and your driveway opens onto a busy street.
Our Gate Parts & Welding Services in Dobbs Ferry
Post Replacement
This is the big one in Dobbs Ferry. On the steep riverward lanes like the Chestnut Street corridor, clay-heavy hillside soil creeps downhill in slow motion. Gate posts set in original shallow footings follow that creep, leaning toward the street a little more each year. We do not just pull the old post and drop in a new one. We re-core the footing, set the new post plumb against the actual slope, and often add a deeper concrete collar so it stays where we put it. In Dobbs Ferry, post replacement is the repair we do most often before any other work can hold.
Typical cost: $450-$1,100 depending on footing depth, post size, and whether we are working with steel, ornamental iron, or a masonry pier.
Hinge Replacement
Older Dobbs Ferry gates were hung with flat hinges made for level ground. On a hillside driveway, those hinges let the gate swing downhill under its own weight, slamming into the stop and wrecking the latch every season. We replace them with slope-compensating hinges sized for your grade. If the original strap hinges are still sound, we can often rebuild and reinforce them instead of full replacement. That is a repair-first approach, and it saves money on period ironwork.
Typical cost: $180-$480 per hinge pair, including on-site welding and adjustment, depending on gate weight and grade angle.
Rail Repair
Hudson River fog does not just make for a nice view. It pushes moisture into uncoated steel and wrought iron, and the first place that rots is usually the rail end at the hinge post. The panel drops, binds on the uphill latch side, and stresses the opener until it burns out. We cut out the rotted section, weld in new stock, and treat the surrounding metal so the same failure does not come back in two years. Where the rail is too far gone, we will tell you straight and price a replacement panel, not a patch job.
Typical cost: $250-$650 per rail repair depending on length, rust extent, and whether we need to remove the gate panel.
Custom Welding
A lot of Dobbs Ferry homes have original ornamental ironwork that is worth saving. We weld new scrollwork, rebuild broken spear points, and fabricate bracketry to fit existing pilasters. When a gate post needs a new base or a masonry pillar needs a steel anchor plate, we weld it on site, match the metal, and keep the original look. Custom work prices run $150-$400 for small fabrications and $600-$1,500 for structural pieces like post bases and full hinge assemblies.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dobbs Ferry
We keep parts on the truck for the operators we see most in Dobbs Ferry: Viking, Ghost Controls, and DoorKing, among others. Older GateHouse and LiftMaster units are common on hillside properties here, and we carry retrofit components and safety edges for those as well. We also handle Elite operators when they turn up. If you have an obsolete control board, we can often cross it to a current Dobbs Ferry Gate Motor & Opener replacement instead of telling you the whole system needs to go. That saves real money on Dobbs Ferry’s older installs.
Common Gate Parts & Welding Problems We See in Dobbs Ferry Homes
- Posts leaning toward the street. Freeze-thaw heave plus creeping clay soil on hillside lots slowly pushes shallow footings out of plumb. We re-core and re-plumb posts before installing any new hardware, because new hinges on a leaning post will fail the same way.
- Wrought iron rusted through at the hinge post. River-generated humidity gets into every uncoated steel surface. By the time the rail end is visibly flaking, the panel has usually dropped enough to drag. We weld in new steel and treat the surrounding metal.
- Gates binding on the uphill latch side. This is a classic Dobbs Ferry slope failure. The gate swings downhill under its own weight, the latch takes the full force, and the lock or latch strips out every season until the hinges are corrected.
- Older operators burning out. A gate that drags or binds makes the opener work against constant resistance. On Dobbs Ferry’s grades, a dragging gate can kill a LiftMaster or GateHouse motor in under a year. We fix the mechanical problem before installing a new motor, so the new one actually lasts.
Pricing for Gate Parts & Welding in Dobbs Ferry, NY
Here is what you can expect in Dobbs Ferry. Hinge replacement runs $180-$480 per pair. Post replacement, including re-coring and new concrete, runs $450-$1,100 depending on footing conditions. Rail repair runs $250-$650. Custom welding runs $150-$400 for smaller pieces and $600-$1,500 for structural fabrications like post bases and full hinge assemblies. The price we quote is the price you pay. It is agreed before any work starts, in writing. No surprise add-ons at the door. We also run standing offers that make this simpler: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we will walk through your gate over the phone, then give you a firm number.
We Also Serve Cities Near Dobbs Ferry
We work across the river towns and nearby Westchester communities, including Hastings-on-Hudson, Greenburgh, Irvington, and Hartsdale. If you are in Dobbs Ferry, we are close. Read more about how we handle gates across the area on our Gate Parts & Welding in Dobbs Ferry page.
Serving Dobbs Ferry, NY - Our Local Coverage Area
We’re based in the Dobbs Ferry area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Dobbs Ferry
It is the freeze-thaw cycle working against shallow footings on clay-heavy hillside soil. Every winter the ground heaves, every spring it settles, and on a slope that settlement is never perfectly even. The post tilts a little more each year until the gate drags or binds. The fix is not to shim it. The fix is to re-core the footing, set the post plumb, and pour a deeper collar that sits below the frost line. That runs $450-$1,100 in Dobbs Ferry. Call (877) 610-2993 and we will look at it in person, free estimate.
Depends on what is left. If the surrounding metal is sound and the rusted section is localized, we cut it out, weld in new stock, and grind it to match. That usually runs $250-$650. If the rail is thin enough that a weld would just blow through to the next weak spot, we will recommend replacing the rail or the panel, and we will tell you that before we take the job, not after. The price is agreed upfront. Call (877) 610-2993 if you want an honest read on a 1930s gate.
Yes, and we do that regularly in Dobbs Ferry. Older GateHouse, LiftMaster, and Viking operators are often worth keeping if the motor is not burned out yet. We fix the mechanical problems first, the hinges or the post, then re-check the operator. If it needs a new Gate Access Control in Dobbs Ferry board or a safety photocell to meet current UL 325, we can often retrofit it without replacing the whole unit. We work with Viking, Ghost Controls, DoorKing, Elite, and others. Call (877) 610-2993 and tell us the brand and model, and we will tell you what is realistic.
Slide rollers on Dobbs Ferry drives take a beating from two things: the grade, which puts constant side-loading on the rollers, and the grit that washes down from the hillside and grinds against the roller surfaces. When the track is not perfectly level, which is common on older Dobbs Ferry installs, the rollers wear unevenly and the gate starts to shudder. We replace worn rollers, then check track level and re-align the gate so the new set lasts. Call (877) 610-2993 for a front-of-gate look, free estimate.
If the pilaster is structurally sound, we weld a steel anchor plate or post base directly to the masonry and set the new post from there. That preserves the original look and is often the cheapest strong fix. If the pilaster is crumbling or leaning, we will tell you, and we will talk through whether a foundation repair or a replacement makes more sense. We do not sell replacement where the existing work can be saved. In Dobbs Ferry, a lot of those pilasters are worth saving. Call (877) 610-2993 and we will give you a straight answer.
Dobbs Ferry Gate Repair That Understands the Hill
On Dobbs Ferry’s steep riverward lanes like the Chestnut Street corridor, clay-heavy hillside soils creep slowly downhill, tilting gate posts toward the street. That is a slope-driven failure almost never seen in flatland Westchester villages. Our crew knows it by heart, because we have dug more than a few of those footings out and started over. We rebuilt a 1920s wrought-iron swing gate on a hillside Victorian near Chestnut Street where the hinge post had crept 4 inches out of plumb toward the street. After re-coring the post footing and welding a new FAAC hinge post base, we replaced eroded strap hinges with slope-compensating hinges sized for the 18% grade, then reinstalled the original GateHouse operator with a new safety photocell to meet UL 325. The gate now clears its arc without sag correction even in spring thaw.
Sitting directly on the Hudson’s eastern bank, Dobbs Ferry also gets persistent river fog that corrodes uncoated hinges, latches, and motor housings faster than inland towns. And the full Hudson Valley freeze-thaw cycle heaves shallow-posted gates every spring. That combination means post re-plumbing and re-coring is routine before any hardware replacement. It is the part of the job that some companies skip, because it takes time and does not show. But fix the panel without the post and you will fix it twice.
We are Gate Parts & Welding for Dobbs Ferry, done by people who will show up, weld it on site, and stand behind the work for 90 days in writing. Hal Gatewood’s name is on the shop. The shop is down the road. That is the oldest accountability there is. Call (877) 610-2993 for a free estimate, any day, any hour. A live person answers.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dobbs Ferry, NY and surrounding communities since 2001.