Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Coconut Creek
If you live in Coconut Creek and your gate motor has stopped responding, a rough quote for repair usually lands between $180 and $420, while a full motor replacement with installation runs $650 to $1,800 depending on the operator and the gate’s condition. We can often get to Coconut Creek the same day you call, and we quote the price before we touch a single bolt. Hal Gatewood has been repairing and replacing gate operators since 2001, and the person who answers your call is a live person from our shop, not a recording. Call (877) 610-2993 and tell us what the gate is doing. We’ll tell you straight what it needs.
This page is written for Coconut Creek specifically. Wynmoor Village and the dozens of 55-and-over HOA communities around it were mostly built in the 1970s and 1980s, and the gate operators from those years are failing together, in waves. What works in Parkland or Boca does not always fit what Coconut Creek has, because the housing stock here is older, the gate frames carry more rust, and the entry systems were designed for traffic volumes half of what they handle now.
Why Gatewood Fence & Gate Is Coconut Creek’s Preferred Gate Motor & Opener Company
We have been servicing automatic gates in Coconut Creek long enough to know which communities still run Eagle and Linear operators with discontinued parts lines. In Wynmoor Village, that means a board swap is often not possible, so we plan for full motor retrofits instead. Our Gate Motor & Opener team carries retrofit kits and operators for exactly this kind of work, and we stock parts locally so Coconut Creek customers are not waiting on a ground shipment while a community entrance stays stuck open.
Hal Gatewood’s name is on the shop, and his address is published. He has been at this since 2001, and the 90-Day Done Right Promise is stamped in writing on every job. If we replace a motor in October and it misbehaves when the snowbirds return in November, one call brings us back. No runaround. That matters in Coconut Creek, where an HOA board is answering to 500 or 5,000 residents who all notice the same broken gate.
We answer calls with a live person around the clock. That matters here because gate failures in Coconut Creek do not follow business hours. A summer thunderstorm can kill a circuit board at 9 p.m. The surge from the grid flickering does not wait for Monday. When you call, you reach a person who can make a decision and get a truck rolling.
Our Gate Motor & Opener Services in Coconut Creek
Motor Installation
A new gate motor in Coconut Creek should be sized for the gate, the traffic volume, and the humidity. We see too many operators that were undersized from day one, burning out early because they were never meant to push a sagging wrought iron swing gate in South Florida heat for twenty years. We install the right motor for what the gate actually is, not what a parts catalog guessed it might be. Every installation includes adjusting the safety photocells, setting the limit switches, and walking the board president through how the manual release works before we leave.
Motor Repair
Most Coconut Creek gate motor failures we see are electrical, not mechanical. Capacitors dry out, circuit boards cook in their own enclosures, and limit switches stop reading accurately. We repair what can be repaired. If a capacitor is dead, we replace the capacitor. If the board is toast because water got in through a cracked housing, we address the housing too, otherwise you will be calling us again in six months. Hal’s repair-first approach means we do not sell you a new $1,500 operator when a $90 part fixes the problem.
Linear Motor Service
Coconut Creek has a lot of older Linear operators because they were standard on 1980s slide gate installations. The company stopped supporting many of those models years ago, and parts like control boards are no longer manufactured. What that means in practice: when a Linear motor fails in Coconut Creek, we often recommend a full retrofit to a current LiftMaster or FAAC operator with battery backup, reusing your existing gate frame, keypad, and loop detectors. You keep the gate you have. You lose the obsolete motor.
Slide Motor Replacement
Slide gates are common at Coconut Creek community entrances, and their motors take a beating here. Post-hurricane debris jams the tracks, and when the operator keeps pushing against a jammed rack, it strips the pinion gear or burns the motor out entirely. We install slide motors matched to the gate’s weight and travel length, and we set the obstruction sensitivity correctly. A motor that reverses too easily will stop on a palm frond. A motor that never reverses will break itself, or worse, hurt someone. We set it so neither happens.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coconut Creek
We service and install FAAC, BFT, Linear, and Viking operators, along with several other major brands. For Coconut Creek customers running discontinued Linear or Eagle motors, we can source retrofit kits and current replacements that work with existing gate frames and entry keypads. Stocking common parts locally means we are not waiting on a warehouse in another state when a community entrance off Lyons Road or Winston Park Boulevard goes down during snowbird season. We keep parts moving so the board is not posting notices in the clubhouse hallway.
Common Gate Motor & Opener Problems We See in Coconut Creek Homes
- Intermittent motor failure from humidity and UV. Coconut Creek sits inland, but the humidity does not care about distance from the beach. Circuit boards and capacitors inside older Eagle and Linear operators degrade year-round, and the failure usually shows up as a gate that works fine for a week, then stops opening for an hour, then works again. HOA boards tend to defer that work through summer, and then October hits and 200 snowbirds return to a gate that will not open.
- Post-hurricane track jams stripping slide gate gears. Debris, palm fronds, and overgrown landscaping slide into the track at community entrances. The operator keeps pushing. The rack and pinion pays the price. We have pulled motors off Coconut Creek slide gates where the only original problem was a branch in the track, but the motor was destroyed because the operator’s obstruction sensor was never set correctly.
- Sagging swing gates throwing off limit switches. Wrought iron gates age, and the hinge post is where the sag happens. When a gate sags, the leaf drops a few inches and the motor’s limit switches misread the travel. The gate reverses mid-cycle, or stops three feet short of closed. A new motor will not fix that. The hinge post has to be addressed, or you will fix the same gate twice.
- Power outages leaving gates dead and residents stuck. Most older Coconut Creek gate operators were installed without battery backup. When the power drops during a summer storm, the gate simply stops. For a 55-and-over community, that is not an inconvenience, it is a safety problem. We retrofit battery backup onto existing operators and include it on new slide and swing motor installations.
Pricing for Gate Motor & Opener in Coconut Creek, FL
Here is what we actually charge in Coconut Creek. Motor repair usually runs $180 to $420. A slide motor replacement with installation runs $700 to $1,600 depending on the operator and whether we are reusing your existing track. A swing gate motor replacement runs $650 to $1,300. Full retrofits for discontinued Linear operators run $900 to $1,800, which includes the new operator, any mounting modifications, battery backup integration, and reprogramming your existing keypad entry. No trip charge inside the county. Every estimate is free, and the price we quote is the price you pay. We agree on the number before any work starts, and that number does not change at the door.
Call (877) 610-2993 for an exact quote on your gate. If someone else has given you a written estimate, we will give you a free second opinion on it. That is just how Hal runs the shop.
We Also Serve Cities Near Coconut Creek
If you are a board member or homeowner just outside Coconut Creek, we cover Pompano Beach, Margate, North Lauderdale, and Lighthouse Point as well. The same crew, the same 90-Day Done Right Promise, and the same repair-first approach. You can read more about our work throughout the area on our Gate Motor & Opener in Coconut Creek page. If your gate is in one of those nearby cities, call us and we will tell you straight what the schedule looks like that week.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Coconut Creek
Yes. We integrate new FAAC, BFT, Viking, and LiftMaster operators with existing keypads, intercoms, loop detectors, and telephone entry systems, including older analog intercom panels still common in Coconut Creek’s 1980s-era communities. At Wynmoor Village we replaced a discontinued Linear slide operator and kept the existing keypad wired in without replacing the whole entry system. The board saved thousands by not tearing out a keypad that still worked fine. Call (877) 610-2993 and describe your entry setup; we will tell you what integrates and what does not.
If the gate opens for one car but not the next, or opens and closes when no car is present, that is usually the loop detector, not the motor. If the motor hums but the gate moves slowly or not at all, or trips its breaker, the motor or the rack is failing. We diagnose both on the first trip, and in Coconut Creek we set the loop sensitivity for this soil, because the sandy, wet ground after a heavy rain changes how loop detectors read a car. Call (877) 610-2993 and we will have a tech check both before quoting any repair.
Without battery backup, the gate stays wherever it was when the power cut, and if it was closed, residents are locked out until FPL restores service. We retrofit battery backup onto existing operators in Coconut Creek, sized for multiple open and close cycles, so the gate works manually or automatically through an outage. For 55-and-over communities off Sample Road and Lyons Road, this is the difference between residents getting home after an evacuation and sitting in their cars at the entrance. Call (877) 610-2993 for a battery backup quote on your specific operator.
No. A new motor on a sagging gate is a waste of your money. The sag happens in the hinge post, not the motor, and the motor is struggling because it is lifting a gate that has dropped out of alignment. We fix the hinge post first, then evaluate the motor. In Coconut Creek we regularly find that the motor itself is fine and the post is the problem. A gate sags in the hinge post, not in the middle, and that is where we start every time. Call (877) 610-2993 and we will come look before you spend on a motor you do not need.
Yes, that is exactly what we do. We retrofit a current LiftMaster, FAAC, or BFT operator onto your existing Coconut Creek gate frame, reusing the track, the keypad, the intercom wiring, and the safety edges. Your gate stays in your driveway. You are not paying for a new gate when the old one still has years left in it. At a Wynmoor Village entrance we replaced a dead Linear slide operator on a corroded rack and pinion track, installed a LiftMaster slide motor with battery backup, and kept the existing keypad and photocells. The board said snowbird residents returning in October would have been trapped outside without it. Call (877) 610-2993 and ask Hal directly whether your gate can be retrofitted.
Contact Gatewood Fence & Gate in Coconut Creek
If your gate motor is groaning, stuck, or dead, call (877) 610-2993. You will reach a live person, not a phone tree, and that person can get a truck headed to Coconut Creek the same day in most cases. Estimates are free, pricing is agreed before work starts, and every job carries the 90-Day Done Right Promise in writing. If another company has given you an estimate, bring it to us for a free second opinion. We serve Coconut Creek, Pompano Beach, Margate, North Lauderdale, and Lighthouse Point. A live person answers around the clock, so call when the gate fails, not when the HOA meeting convenes.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coconut Creek since 2001.