Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Coconut Creek
Gate repair in Coconut Creek usually runs $180 to $650 for most common failures, and the fastest fixes happen when you call a company that already knows the city’s older communities. If you’re in Wynmoor Village, a gated HOA off Lyons Road, or any of the condo and villa neighborhoods built in the 1970s and 80s, you already know these gates don’t fail politely. They fail after thunderstorms, they fail when a hinge post finally gives out, and they fail right when the snowbirds come back. Call (877) 610-2993 and a live person answers. Not a call tree. Not a recording.
Why Gatewood Fence & Gate Is Coconut Creek’s Preferred Gate Repair Company
Hal Gatewood has been running Gatewood Fence & Gate since 2001, and we’ve spent those years doing the work other companies walk away from. The gate that sagged for three years. The operator board that shorted out after a lightning strike. The underground loop detector that works fine until it rains. We’re the company that welds on site, fixes what’s fixable, and tells you honestly when replacement is cheaper than another round of patching.
Coconut Creek homeowners call us because we show up when we say we will. Our scheduling runs out of our South Florida office in Miami, but the people who work your gate live local and know the streets around 33097, from the Wynmoor Village entrance gates to the smaller swing gates on the villa communities off Copans Road. We carry retrofitted boards and common repair parts for the legacy operators still running in this city, which means we’re not ordering parts and hoping they arrive next week. We’re fixing your gate today.
We stand behind every repair with the 90-Day Done Right Promise, in writing. If it’s not right, Hal comes back. No runaround, no arguing. That’s the whole promise.
Our Gate Repair Services in Coconut Creek
Electric Gate Repair
Electric gate repair in Coconut Creek means dealing with operators that have been through two decades of South Florida humidity and summer lightning. We service FAAC, BFT, Linear, and Viking among others, and we stock retrofit boards for operators whose original parts went out of production years ago. When a Wynmoor Village slide gate’s 1980s Linear board fries during a storm, you don’t need a whole new gate. You need a modern board wired in correctly, a fresh set of capacitors, and someone who understands the safety sensors required on every operator in the city’s HOA communities.
Automatic Gate Repair
Automatic gates in Coconut Creek are workhorse gates. They cycle hundreds of times a day during season, and the HOA-governed communities along the city’s main corridors were never designed for today’s delivery traffic. When a gate loses its limit switch or the obstruction sensor starts reversing for no reason, we trace the problem back to the component instead of guessing. We work on Ghost Controls, LiftMaster, DoorKing, and Elite systems, and we carry the relays, boards, and sensors that keep those gates cycling instead of locking up at 4 p.m. on a Friday.
Hinge & Post Repair
Here’s the thing about a sagging gate in Coconut Creek: the gate sags at the hinge post, not in the middle. The post is what’s failing, usually after years of the gate’s weight leaning into corroded metal. We cut out the old post, set and weld a new one, and re-hang the gate so it swings true. On wrought iron swing gates in the older villas and condos along Wiles Road and Sample Road, a post repair is often the difference between keeping a gate you like and paying for a gate you don’t.
Weld & Rust Repair
Rust never sleeps in Broward County, and inland Coconut Creek gets the same brutal humidity as everywhere else in South Florida without any sea breeze to slow it down. We grind out rust pockets on wrought iron frames, weld in new material, and re-seal the joint so it doesn’t come back next season. If you catch a rust bubble early, we can fix it for a few hundred dollars. If you wait until the lower rail flakes apart, you’re looking at a custom fabrication, and that’s a different conversation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coconut Creek
We service and repair operators from FAAC, BFT, Linear, and Viking regularly across Coconut Creek’s condo communities, along with most other major brands still working in the field. Our repair-first philosophy means we keep retrofit boards, common relay sets, and sensor kits on hand specifically because so many of the city’s gates run on equipment that manufacturers stopped supporting a decade ago. If your community has an Eagle or Linear unit from the 1980s, call us before you pay a national company to rip it out. We’ll tell you honestly what’s salvageable and what’s not.
Common Gate Repair Problems We See in Coconut Creek Homes
- Corroded hinge posts on wrought iron swing gates. Decades of humidity and rain wick into the post base, rust eats the metal from the inside, and the gate starts to sag and scrape. Fixing the post before it fails completely costs less than a new gate and keeps the original design intact.
- Obsolete Eagle and Linear operator boards shorting out after storms. Inland Broward County gets hammered by summer lightning, and those surges head straight for older control boards. We retrofit modern boards with proper surge protection instead of band-aiding a board that’s going to fail again in August.
- Slide gates jamming with post-storm debris. After a hurricane or heavy storm, branches and palm fronds wedge into the track and the gate tries to push through the debris instead of reversing. That strips rack and pinion gears, and suddenly a $150 track cleaning becomes a $900 gear replacement.
- Safety sensors failing after rain. Photo eyes and loop detectors get fogged, flooded, or fouled with moisture, and the gate refuses to close or reverses mid-cycle. That’s usually a sensor or loop issue, not a full operator failure, and it’s one of the fastest fixes we do.
Pricing for Gate Repair in Coconut Creek, FL
In Coconut Creek, a standard control board retrofit or relay swap runs $180 to $340. A hinge post replacement with welding typically falls between $400 and $750 depending on post size and access. Rust repair and welding starts around $200 for small pockets and climbs toward $600 for significant frame rebuilds. A full operator replacement, when the old one is genuinely dead, lands between $850 and $1,500 installed. Those are the numbers we work with every week in this market. We quote the price before we start, in writing, and that price doesn’t change at the door. You also get $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate from another company. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Coconut Creek
Our Gate Repair team works across northwest Broward County, so if your community is in Pompano Beach, Margate, North Lauderdale, or Lighthouse Point, we’re already nearby. We treat Gate Repair in Coconut Creek as the anchor, but the same crew and the same trucks cover the neighborhoods around it. For the full breakdown of our gate repair work, see our Gate Repair service page.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Coconut Creek
Yes, in most cases. We retrofit modern control boards and sensor kits into legacy operators like the 1980s Linear units common around Wynmoor Village, so you keep the gate but get UL 325-compliant safety features. The rack and pinion on those old slide gates is often still salvageable even when the board is fried. We just did exactly that job at Wynmoor Village: replaced a fried Linear board with a retrofitted modern unit and added a safety photocell, all without pulling the gate off its track. Call (877) 610-2993 and we’ll assess what you have before recommending anything.
Because the hinge post is what’s failing. Decades of South Florida humidity corrode the steel post at ground level, and the gate’s weight slowly pulls the post out of plumb, which makes the gate sag. The gate itself is usually fine. We cut out the old post, set a new one in concrete, and re-hang the gate. Fix the panel without the post and you’ll fix it twice.
It’s usually a photo eye or loop detector problem rather than a full operator failure. Rain and moisture get into the sensor housing, the loop signals become intermittent, and the gate stops and reverses because it’s reading a phantom obstruction. On Coconut Creek’s 1970s and 80s gate systems, it’s also common for aging capacitors to lag after a wet stretch. We test the sensors first, then the boards, then the motor itself. Usually it’s a two-hour fix once we’re there.
Yes, and it’s one of the upgrades we do most often in Coconut Creek’s older villa communities. A 1970s swing gate with a working motor but no modern safety edges or photocells can usually be retrofitted with a keypad, a photo eye, and a new control board that brings it into UL 325 compliance. The gate itself stays. The operator gets a new brain. It costs a fraction of a full replacement and keeps the original gate’s look.
Because the snowbirds come back. HOA boards in Wynmoor Village and other seasonal communities defer gate work through the slow summer months, and then hundreds of residents return in the fall and suddenly need every deferred failure fixed immediately. It’s a predictable surge we plan for every year, and it’s exactly why we keep ready stock of the legacy boards and parts this market needs. Book ahead in September and you’ll skip the worst of it. Call (877) 610-2993 for a free estimate.
Call Gatewood Fence & Gate for Gate Repair in Coconut Creek
If your Coconut Creek gate is sagging, stuck, or stubborn after a storm, call (877) 610-2993. A live person answers around the clock. We’ll schedule a visit, quote the repair before we start, and stand behind the work with our 90-Day Done Right Promise in writing. Hal’s name is on the shop. That’s not a slogan. It’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coconut Creek since 2001.