Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Coconut Creek
Gate installation in Coconut Creek, FL typically runs $1,800-$6,500 for a complete automatic swing or slide gate, and most of our local jobs are quoted within a day and scheduled within one to two weeks. If you live in Wynmoor Village or one of the dozens of HOA-governed communities in the 33097 ZIP, you already know the worst timing for a gate failure: the week half the residents fly back from up north. We plan for that surge every fall. Call (877) 610-2993 and you’ll get Hal or someone from our crew on the line, not a voicemail, not a call center.
Coconut Creek is its own animal when it comes to gates. The housing stock is older, the climate eats metal and circuit boards year-round, and the HOAs have rules that national installers don’t bother to learn. We do. We’ve pulled up to entrances off Lyons Road, Sample Road, and Wiles Road enough times to know exactly what a 1980s Linear operator sounds like when it’s about to quit. That local knowledge means fewer surprises on the quote and fewer return trips after the job.
Why Gatewood Fence & Gate Is Coconut Creek’s Preferred Gate Installation Company
Hal Gatewood has been fixing and installing gates since 2001, and his name is on the shop and on every invoice. That matters more in Coconut Creek than in most places, because half the HOAs here have been burned by companies that swoop in, swap a board, and vanish. We’re the opposite. Our Gate Installation team works with a published address, a license number you can look up, and a 90-Day Done Right Promise in writing on every job. One call brings Hal back. No runaround.
Coconut Creek customers call us because the person who shows up at the gate is someone they’ll see again at the hardware store. We answer the phone live, 24 hours a day, 7 days a week. You won’t get a robotic queue or somebody reading a script in another state. You’ll get a real answer, usually from someone who has already worked on a dozen gates in your neighborhood.
Repair-first is our philosophy, even on installations. Plenty of companies will tell you a 1980s wrought iron swing gate needs a full replacement when the real problem is a rotted post footing and a weak capacitor. We’ll tell you what actually needs replacing, show you the evidence, and quote the fix before we quote the new gate. If you already have a written estimate from someone else, bring it in. We’ll give you a free second opinion.
Our Gate Installation Services in Coconut Creek
Driveway Gate Installation
Most driveway gates in Coconut Creek are either swing or slide designs serving villa communities and single-family homes off streets like Winston Park Boulevard or Lakeview Drive. In the 33097 ZIP, our crews regularly retrofit older electromechanical operators with modern units from FAAC and BFT, adding battery backup so a summer storm doesn’t strand residents on either side of the gate. We quote the full job in writing before any work starts, and that price doesn’t change at the door.
Pedestrian Gate Installation
Pedestrian gates are where Coconut Creek HOAs run into the most access control headaches. Residents want keypad entry, visitors need a call box, and delivery drivers need something that actually works after the 2 p.m. Amazon surge. We install pedestrian gates with keypad and intercom integration, and we build them to handle the humidity. A corroded hinge on a pedestrian gate at a Wynmoor Village walkway is not a repair we patch. We replace the hinge, the post cap, and anything else that’s already failing.
Sliding Gate Installation
Sliding gates take the most abuse from Coconut Creek’s storm debris and delivery traffic. After a summer thunderstorm or a hurricane pass, we see slide gates jammed open because branches and palm fronds bent the rack. The fix is a rack and pinion reset and often a full track replacement. For new Gate Installation in Coconut Creek jobs, we recommend slide gates with heavy-duty racks and photo-eyes positioned to avoid false triggers from landscaping.
Swing Gate Installation
Wrought iron swing gates dominate the 1970s and 1980s communities in Coconut Creek, and they fail in predictable ways: rust at the bottom rail, fatigued hinge posts, and operators that were never sized for the gate’s weight. We install swing gates with properly loaded hinges, reinforced posts, and operators matched to the actual gate mass. When we install a swing gate at a Wynmoor Village entrance, we prioritize quiet operation. Residents in the buildings near the gate do not want a gate that grinds and clanks every time a car leaves at 6 a.m.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coconut Creek
We install and service gate operators from FAAC, BFT, and Linear, along with six other major brands. In Coconut Creek’s older communities, we see a lot of discontinued Eagle and Linear units with no remaining parts line. When a lightning strike takes out a capacitor on one of those, a board swap isn’t possible, and a full operator retrofit is the only honest fix. We stock the parts and operators that Coconut Creek HOAs actually need, which means we can get most installations scheduled without waiting on a distributor three states away.
Common Gate Installation Problems We See in Coconut Creek Homes
- Rusted bottom rails on wrought iron. Decades of sprinkler overspray and 80% humidity eat the bottom rail of swing gates until the panel sags below the latch line. By the time you can see the rust, the panel usually needs full replacement, not just paint.
- Surge-damaged operator boards. Coconut Creek’s summer thunderstorms deliver repeated power surges. Older Eagle and Linear boards don’t survive them. New installations should include surge protection and battery backup as standard, not as an upsell.
- Jammed slide gate tracks from storm debris. Palm fronds, branches, and landscaping debris get pushed into slide gate tracks during every heavy storm. The rack bends, the gate jams, and the operator burns itself out trying to push through. We reset the track and rack, then check the operator for heat damage.
- Obsolete access control hardware. A lot of Coconut Creek’s 1980s communities have keypads and intercoms with discontinued parts. When the HOA finally approves replacement, the new hardware has to integrate with existing wiring and resident codes. We handle that retrofit without forcing residents to relearn everything from scratch.
Pricing for Gate Installation in Coconut Creek, FL
A complete single swing gate with operator, keypad, and safety photo-eyes in Coconut Creek runs $2,800-$4,500. A double swing gate for a wider HOA entrance typically lands between $4,500 and $6,500. Slide gates run $3,000-$6,000 depending on track length and gate weight. Pedestrian gates with keypad entry are the entry point, from $1,800 to $3,200. What moves the price is the gate material, the existing post condition, and whether we’re doing a full retrofit or a fresh install. Every price is quoted in writing and agreed before we touch anything. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Coconut Creek
Beyond Coconut Creek, our crews work regularly in Pompano Beach, Margate, North Lauderdale, and Lighthouse Point. If your HOA gate crosses city boundaries or you manage properties in multiple South Florida communities, one call covers the whole map. We’ve built our schedule around the same fall surge all these cities share.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Coconut Creek
Yes, gate operator replacements at community entrances in Coconut Creek generally require a permit, and your HOA’s architectural review board will want documentation before work starts. We handle the permit paperwork and HOA submittal for you. We’ve worked with enough Coconut Creek associations to know exactly what their boards ask for: contractor license, insurance certificate, product spec sheets, and a written work plan. Call (877) 610-2993 and we’ll walk the HOA through the process.
Coconut Creek’s 55+ communities need battery backup because summer power outages leave automatic gates dead, and residents in Wynmoor Village cannot be expected to get out and push a 600-pound iron gate open. Battery backup keeps the gate operating through short outages and gives residents enough time to come and go until power is restored. We include battery backup as a standard recommendation on every installation in the 33097 ZIP, not as a surprise line item.
Yes, quiet operation is one of the first things we address at Wynmoor Village and similar Coconut Creek communities where units sit close to the entrance. The noise usually comes from undersized operators working against stiff hinges or misaligned tracks. We install properly sized FAAC and BFT operators with soft-start and soft-stop motion, and we align everything before we call the job done. If the old gate woke people up, the new one won’t.
We schedule HOA gate installations for the summer window when Coconut Creek communities thin out, so work happens while most residents are up north. We coordinate with the property manager, document everything for the board, and make sure the gate is fully operational before the October return wave. The worst mistake an HOA can make is deferring the work until November, when every contractor is slammed and every resident is calling the management office. Book it in June or July, and it’s done before anyone comes home. Call (877) 610-2993 to lock in the schedule.
Yes, current Florida building code and UL 325 safety standards require photo-eyes on all new automatic gate installations, regardless of whether the old gate had them. Coconut Creek enforces this on permitted work, and any contractor who says otherwise is leaving you exposed to liability. We install photo-eyes on every automatic gate we put in, and we test them before we leave. We’ll also add a safety edge or reverse loop where the gate design calls for it.
Call Gatewood Fence & Gate for Gate Installation in Coconut Creek
If you live in Wynmoor Village, manage an HOA off Wiles Road, or own a villa in one of Coconut Creek’s 55+ communities, you can reach us at (877) 610-2993 any time. A live person answers. We’ll show up when we say we will, quote a price in writing, and stand behind the work for 90 days with Hal’s signature on the promise. The name is on the shop, the shop is down the road, and we’ve been doing this since 2001. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coconut Creek and South Florida since 2001.