Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Adrian
If your automatic gate in Adrian has stopped opening, is grinding, or will not close all the way, the fix is usually faster and cheaper than you think. Most gate motor and opener repairs in Adrian run between $180 and $480 for a service call and labor, with full motor replacements typically landing between $650 and $1,400 depending on the operator, the gate’s weight, and whether you need slide or swing hardware. We get calls from the neighborhoods around Adrian College, down US-223, and out toward the farms south and east of town every week, and we are in Adrian most days. Call (877) 610-2993 and you will get a live person who can tell you what is wrong and what it will cost before anyone gets in a truck.
We are the Gate Motor & Opener crew from Gatewood Fence & Gate, and we have been repairing and installing gate operators in Lenawee County since 2001. Hal Gatewood owns the shop and still runs most of the calls himself. The name is on the shop, and the shop is down the road. That matters when the next freeze-thaw cycle hits and your gate is the one that will not open at 6 a.m.
Key Takeaways
- Most gate motor repairs in Adrian cost $180-$480; full replacements run $650-$1,400.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Every job carries a written 90-Day Done Right Promise.
- No trip charge inside Lenawee County, and $40 off any repair over $200.
- A live person answers our phone 24/7, not a voicemail queue.
Why Gatewood Fence & Gate Is Adrian’s Preferred Gate Motor & Opener Company
We have spent more than two decades driving the roads in and around Adrian: US-223, M-52, Beecher Street, Maumee Street, and the gravel township roads that turn into farm lanes. That local time matters when a slide gate on a shared driveway near downtown starts binding against a frost-heaved post, because we recognize that problem before we even get out of the truck. The fix is usually a post re-setting and a limit switch adjustment, not a new motor. A lot of companies would sell you the new motor anyway. That is not how Hal works.
Adrian customers call us because they want a name they can verify and a person who will show up in the window they promised. Hal Gatewood’s name is on the shop and on every invoice. Calls are answered by a live person around the clock, and the person who shows up at your gate is background-checked and wears a uniform. We do not run a dispatch queue and we do not route calls to a call center three states away.
Every job in Adrian, whether it is a new slide motor on a farm gate south of town or a battery backup added to a LiftMaster on a Victorian house near Adrian College, carries our 90-Day Done Right Promise in writing. If it is not done right, one call brings Hal back. No fine print, no runaround.
Our Gate Motor & Opener Services in Adrian
Motor Installation
A new gate motor install in Adrian typically runs $850 to $2,200 for a residential swing or slide operator, including the motor, mounting hardware, safety photocells, and labor. On a shared driveway easement near downtown or Adrian College, we almost always install a slide operator or a post-mounted compact swing arm, because a standard pad-mount swing arm blocks the neighbor’s side of the driveway. We also handle the power run, from a nearby outlet or a dedicated circuit, and we will quote the whole job in writing before we start.
Motor Repair
Most motor repair calls in Adrian are fixable the same day: a fried capacitor, a stripped gear, a limit switch that drifted, or a control board killed by a power surge. Typical repair tickets run $180 to $480, and the price is quoted and agreed before any work starts. We stock boards, gears, remotes, and photocells for all nine major brands, so we are not standing in your driveway waiting on a warehouse. Two things we see constantly across Adrian: frost heave has shifted a hinge post out of plumb so the gate drags, and salt spray off US-223 and M-52 has corroded a chain or seized a slide gear. Both are repairable, and both are cheaper to fix before the motor burns itself out trying to overcome the resistance.
Linear Motor
Linear gate motors, including the Linear L-Series slide operators that show up all over Adrian’s rural edge, are workhorses when they are installed right. When they are not, the arm or chain binds, the force limiter trips, and the gate sits half open. We install and repair linear motors on residential and agricultural slide gates throughout 49221, and we make sure the track is level and the limit cams are set right before we call the job done. On a 300-pound tube-steel farm gate, a light-duty linear motor is a bad match, and we will tell you that plainly rather than install something that burns out in a year.
Slide Motor
Slide gates are common in Adrian because so many lots, especially pre-1950 homes near downtown and around Adrian College, have side yards and driveway easements too narrow for a swing gate. Slide motors need a straight track, a solid mounting pad, and adjustment after the ground freezes and thaws. We install and service slide motors from FAAC, BFT, Viking, and Linear, and we handle the entrapment protection requirements - photocells and edge sensors - on every install. Prices for slide motor replacement in Adrian run $700 to $1,600, depending on the motor’s duty rating and whether the existing track can be reused.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Adrian
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Adrian, we most often work on LiftMaster swing operators on residential lots near downtown, FAAC and BFT slide operators on rural driveways, and Linear openers on farm and equipment gates south of town. Because we stock common boards, remotes, gears, and photocells locally, we can usually complete a repair in one trip. If you have a Viking or Ghost Controls operator, we handle those too, and we would rather repair the unit you have than sell you one you do not need.
Common Gate Motor & Opener Problems We See in Adrian Homes
- Frost heave shifts the hinge post out of plumb. From November through March, Adrian’s freeze-thaw cycles push posts up and sideways, so the gate binds against the rack and pinion or drags on the ground until the operator trips its force limiter. The fix is re-setting the post and re-hinging the gate, not replacing the motor.
- Salt spray off US-223 and M-52 corrodes slide hardware. Chain drives and slide gears near the road take a beating from winter salt mist, which leads to seized gears and intermittent operation in January and February. We clean, lube, and replace corroded components as part of most slide motor repairs in Adrian.
- Mismatched operators on rural-edge parcels. On the south and east sides of Adrian, many properties have a decorative front gate at the street and a heavy pipe or tube-steel farm gate further back on the same parcel. A light-duty swing arm trying to move a 300-pound slide gate is a fast way to burn out a motor. We match the operator to the gate’s actual weight and duty cycle.
- No battery backup on gates that matter. Adrian gets enough ice storms and summer thunderstorms that a gate with no battery backup is a gate that fails at the worst moment. We install battery backup kits on most residential and farm gate systems we service, and we test them before we leave.
Pricing for Gate Motor & Opener in Adrian, MI
Here are honest ranges for Adrian’s market. A service call to diagnose a gate motor problem runs $85 to $150, and that charge is waived when you approve the repair. Most motor repairs land between $180 and $480. A new residential swing or slide operator, installed with safety photocells and the power run, runs $850 to $2,200. A heavy-duty agricultural slide motor, the kind you see on farm gates outside Adrian city limits, runs $1,400 to $3,600 installed. The price is quoted and agreed before any work starts, and our standard offers apply: $40 off any repair over $200, no trip charge inside Lenawee County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote on your gate. Estimates are free.
We Also Serve Cities Near Adrian
Our Gate Motor & Opener in Adrian team also covers the surrounding corners of Lenawee County and across the county line. If you are in Tecumseh, Milan, Lambertville, or Temperance, we can usually have a tech to your gate the same day or next morning. The same pricing, the same 90-Day Done Right Promise, and the same live person answering the phone apply everywhere we service.
Serving Adrian, MI - Our Local Coverage Area
We’re based in the Adrian area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Adrian
Yes, and on most shared driveway easements in Adrian’s 49221, especially near downtown and Adrian College, we install a post-mounted compact swing operator or convert the gate to a slide setup so the pad-mount arm never blocks the neighbor’s side. The key is mounting the operator on the inside face of the post, which keeps the neighbor’s delivery trucks and cars passing without interruption. Call (877) 610-2993 and we will look at the easement and give you a written plan.
In almost every case we see in Adrian, a gate motor that burns out each spring is fighting a frost-heaved hinge post, not a bad motor. The post shifts out of plumb over the winter, the gate binds against the rack or drags on the ground, and the motor’s force limiter trips daily until the windings finally overheat and fail. Fix the post first, then replace the motor if it is actually dead. That order of operations is how we keep repair costs down for Adrian homeowners.
Yes, we install solar gate openers on farm and equipment gates throughout the rural parcels around Adrian, including on the south and east sides of 49221 where a power run is impractical. A solar setup, paired with a sealed battery and a low-draw linear or slide motor, keeps a farm gate working without trenching power 400 feet down a lane. Your panel placement, battery capacity, and the gate’s daily duty cycle all affect what we recommend, and we will tell you honestly if a solar kit is a bad fit for your gate before we sell you anything.
Yes, and on the older Victorian and early 20th-century homes near downtown Adrian, adding a keypad or intercom to an existing operator is one of the more straightforward upgrades we do. Most LiftMaster, FAAC, BFT, and Linear boards accept an external keypad or phone-line intercom, and we can wire it in, program it, and show you how it works. On gates tied into an intercom system, we integrate the two so the gate opens from the house without replacing the whole controller. Call (877) 610-2993 for a free estimate on adding access control to your existing gate.
Automatic gates in Michigan must meet ASTM F2200 standards for entrapment protection, which means working safety photocells or edge sensors and, on slide gates, guards that prevent a hand from reaching through the gate panel into the pinch point at the motor. We install and set photocells on every motor install and repair we touch in Adrian, and we verify the sensors are functioning before we leave. If someone worked on your gate recently and bypassed or removed the photocells, that is a safety violation we will flag and correct - no charge if we are already on site for another repair.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Adrian since 2001.
Contact Gatewood Fence & Gate in Adrian
If your gate motor is acting up, do not wait until it dies completely. The longer a binding gate runs, the more damage it does to the motor, the gears, and the hinges - and the bigger the bill gets. Call (877) 610-2993 and you will get a live person who can talk through the symptoms, give you an honest price range, and get someone out to your Adrian property fast. The estimate is free, the price is quoted and agreed before any work starts, and every job carries our 90-Day Done Right Promise in writing. Hal’s name is on the shop. That is the oldest accountability there is.