Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Adrian
Gate repair in Adrian usually costs between $140 and $420 depending on what’s actually wrong, and most hinge, post, and realignment work can be done the same week we see it. If you’ve got a sagging ornamental iron gate on a Victorian near downtown, or a tube-steel farm gate that won’t swing on a gravel road off M-52, we’ll send someone who knows exactly what he’s looking at. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
We’ve worked on gates in Adrian long enough to know the city’s split personality: century-old homes around Adrian College with decorative wrought iron out front, and rural-edge properties where the driveway gate at the street is a different animal entirely from the pipe gate back by the barn. That’s not a problem. It’s just Adrian. And we stock parts for both.
Why Gatewood Fence & Gate Is Adrian’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and the name on the truck is the same name on the invoice. When you call about a gate in Adrian, you’re talking to a company that publishes its address and license number, answers the phone with a person around the clock, and doesn’t hide behind a national call center. Hal’s crew works Adrian regularly, and the person who shows up is background-checked, uniformed, and has been doing this long enough to diagnose a problem without guessing.
Reviews from Adrian customers tend to mention the same three things: we showed up when we said we would, we fixed the gate instead of replacing it, and we stood behind the work. The 90-Day Done Right Promise is in writing on every job. If it’s not done right, one call brings us back. No runaround. No fine print. For a town where word travels fast at the hardware store and the farmers market, that’s the only way to work.
Response time to Adrian is the same day for emergencies, and we don’t charge a trip fee inside Lenawee County. That matters when a gate won’t close and the sheep are out, or when the only way out of your driveway is blocked by a gate that’s decided to quit.
Our Gate Repair Services in Adrian
We offer the full range of Gate Repair work, but in Adrian we see certain jobs more than others. Here’s what takes up most of our week:
Electric Gate Repair
Adrian’s freeze-thaw cycles are hard on control boards and wiring. Moisture gets into the housing, connections corrode, and a board that worked fine in October quits in February. We test the board, the transformer, and the receiver before we replace anything, because swapping a board when the real problem is a corroded wire just means you’ll call us again in March.
Automatic Gate Repair
Older automatic gate openers around Adrian, especially on homes built before modern safety standards, often lack photo-eye sensors. If your operator from the 1990s still runs but doesn’t stop when something’s in the way, that’s a safety issue, not just a convenience problem. We can retrofit entrapment protection to most legacy control boards so the gate stays original and your kids stay protected.
Hinge & Post Repair
This is the most common call we get in Adrian, and the freeze-thaw cycle is usually the culprit. Frost heave shifts posts out of plumb, the gate starts dragging, and the hinge welds crack under the extra stress. We set the post right and re-weld the hinge in place, in your driveway, without hauling the gate off to some shop. A gate sags in the hinge post, not in the middle, and that’s where we start.
Gate Realignment
Doors that used to swing clean and now scrape the ground, gates that won’t latch because the frame settled an inch, double gates that meet at the top but not the bottom: all realignment work. On older Adrian homes with settled foundations and original gate posts, this is often the difference between a gate you live with and a gate you actually use.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Adrian
We’re certified to service nine major gate brands, and for Adrian customers that matters because we keep common parts for Linear, Viking, and Ghost Controls on the truck. LiftMaster and FAAC parts are usually a day out. If you’ve got a DoorKing from the 2000s or a Viking that’s been through fifteen Michigan winters, we can probably get it running without a full replacement. When a board is truly dead, we’ll tell you that too, and quote a new one before any work starts.
Common Gate Repair Problems We See in Adrian Homes
- Rusted hinge welds on ornamental iron gates near US-223 and M-52. Road salt spray gets into the pores of the metal and rusts from the inside out. By the time you see rust blooms at the hinge, the weld is usually compromised. We grind it back, re-weld, and seal it.
- Frozen control boards on automatic gates. Condensation inside the operator housing freezes overnight, and the board shorts when it thaws. Adrian’s temperature swings make this a January-through-March staple for us.
- Sagging gates from frost-heaved posts. The ground swells and contracts, the post tilts, and the gate starts dragging or binding on the latch side. We dig, reset, and pour a proper footing, not just shim it and hope.
- Obsolete operators without entrapment sensors. Adrian has a lot of legacy automatic gates installed before photo-eyes were required. The gate still runs, but it won’t reverse if a child or dog is in the path. This is the one repair we recommend even when the gate technically works.
Pricing for Gate Repair in Adrian, MI
Here’s what you can expect to pay in Adrian’s market:
| Service | Typical Range |
|---|---|
| Hinge & post repair (single gate) | $180-$340 |
| Weld & rust repair (in driveway) | $140-$280 |
| Gate realignment & latch adjustment | $120-$240 |
| Electric gate diagnostic & control board replacement | $220-$480 |
| Automatic gate opener retrofit (photo-eye safety install) | $240-$520 |
These are honest ranges for Adrian. A simple hinge re-weld on a chain-link gate runs toward the low end. A period ornamental iron gate on a Victorian near downtown, where we have to match old hardware and work around original masonry, runs toward the high end. Every price is quoted and agreed before any work starts. You’ll never get a surprise invoice after the fact. We also offer $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Adrian
Our Adrian crew also covers Tecumseh, Milan, Lambertville, and Temperance. If you live near the county line or a ways out in Lenawee County, we’re still your local shop. For more about our full service area, see Gate Repair in Adrian coverage details.
Serving Adrian, MI - Our Local Coverage Area
We’re based in the Adrian area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Adrian
Yes. Most sagging ornamental iron gates on Adrian’s older homes can be repaired by resetting the hinge post and re-welding the cracked hinge. The problem is almost never the gate itself; it’s the post that shifted and took the hinge with it. We fix the post, weld the hinge, and the gate hangs straight again. We’ll only recommend replacement if the metal is so far rusted through that welding would be cosmetic, not structural. Call (877) 610-2993 and we’ll come look at it for free.
Yes, we can retrofit photo-eye sensors to most legacy gate operators without replacing the entire unit. The control board on many 1990s LiftMaster, DoorKing, and Viking models already has sensor inputs, they were just never wired because the standards changed later. We’ll test the board, install the photo-eyes, and verify the gate reverses under resistance. If the board is too old to accept sensors safely, we’ll tell you honestly and quote a replacement board, not a whole new operator.
Yes, one call can handle both. Rural-edge Adrian properties frequently have this exact setup, so our trucks carry both ornamental hardware and heavy agricultural-grade hinges, rollers, and welding gear. The decorative gate likely needs alignment and rust work; the farm gate likely needs post reinforcement and heavy hinge replacement. We bring what both require in the same trip, so you’re not paying for two service calls. Call (877) 610-2993 with your address and we’ll schedule accordingly.
Freeze-thaw cycles from November through March cause the ground around gate posts to heave and settle repeatedly, which slowly tilts the posts out of plumb. A gate that was perfectly hung in October can drag by February because the hinge post moved a quarter inch. We see this pattern every year in Adrian, especially on older homes with shallow footings. The fix is to reset the post with a deeper concrete footing that sits below the frost line, then re-hang the gate. That’s a permanent repair, not a seasonal adjustment.
If the rust is surface-level, we can grind it back, re-weld the area, and seal it with a corrosion-resistant coating, and that’s often enough for years of service. If the rust has eaten through the metal and the hinge point is thinned by more than about a third, we’ll recommend replacing that section. Salt spray from US-223 and M-52 accelerates rust on exposed metal, so on Adrian gates we always seal and treat after welding. We’ll show you the metal before and after, and you’ll know exactly what we’re doing and why.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Adrian since 2001.