Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Adrian
Gate installation in Adrian, MI typically runs between $1,800 and $7,500 depending on whether you’re adding a decorative ornamental driveway gate near downtown or a working farm gate on a rural parcel off US-223. Most standard installations are completed in one to two days once materials are on hand, and custom ornamental work near Adrian College or the historic district usually takes two to three weeks from measure to final weld. Call (877) 610-2993 and you’ll reach a live person who can schedule a free measure and written quote.
Adrian isn’t a one-size-fits-all market. The same technician who welds a period-correct iron gate on a Victorian near downtown might drive ten minutes to a farmstead on the south side where a 16-foot tube-steel gate has to hold back cattle and stand up to Lenawee County winters. We know the difference because we work both ends of it every week.
Why Gatewood Fence & Gate Is Adrian’s Preferred Gate Installation Company
Hal Gatewood has been at this since 2001, and his name is on the shop. That matters in a town like Adrian, where people still ask their neighbor who did their fence before they call a stranger. We’re locally owned and owner-operated, with a published address and license number anyone can look up. Hal will be there himself, or you can drive to the shop and look him in the eye.
Every installation in Adrian carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings him back. No runaround, no “up to” language, no fine print. We also answer the phone 24/7 with a live person, not a voicemail or an automated queue. When your gate won’t close at 9:30 on a Tuesday night, you talk to a human who knows Adrian, not a script.
Our Gate Installation team works throughout Adrian, from the blocks around Adrian College to the rural-edge parcels east of M-52. Background-checked, uniformed technicians show up in the window they promised, and they don’t pad the invoice when they get there.
Our Gate Installation Services in Adrian
Driveway Gate Installation
Driveway gates in Adrian run the full range. A basic chain-link or utility gate on the city’s outskirts might be straightforward, but the ornamental steel and iron gates near downtown demand real fabrication skill. We handle both, including custom posts, period-compatible hinges, and operators sized to the gate’s actual weight, not a guess from a catalog. A driveway gate on a Lenawee County road also needs to account for frost heave from the first day, because Adrian’s winters don’t forgive shortcuts.
Pedestrian Gate Installation
Pedestrian gates in Adrian often sit beside a larger driveway gate, especially on the older residential streets west of Main. We install and hang walk gates that match the main gate’s material and finish, with self-closing hinges and latches that hold up to repeated use. On historic homes, we’ll fabricate hardware that matches the original ironwork instead of bolting on whatever comes out of a box.
Sliding Gate Installation
Sliding gates make sense on Adrian properties where a swing gate would block a driveway or fight the slope. They’re common on the south and east sides of town, where rural driveways run long and straight. We install cantilever and track-style sliding gates with proper concrete footings and operators that don’t bind. In Adrian, the track has to survive repeated freeze-thaw cycles, so we set it to drain and spec hardware that won’t seize in March mud.
Swing Gate Installation
Swing gates remain the most common style for Adrian’s older residential lots, particularly where the driveway opening is wide and there’s room for the arc. We set post footings below the frost line, hang the gate true, and match the operator to the gate’s actual swing weight. A swing gate that sags in the hinge post, not in the middle, is where we start, and we fix the post before we touch the panel.
Double Gate Installation
Double gates, or paired swing gates, appear often on Adrian’s rural-edge properties where the driveway entrance is fourteen to twenty feet wide. Where some companies would leave a decorative double gate underpowered, we size the operator for the total leaf weight and add a center stop that holds up to wind off the fields. On properties that also have a separate farm gate further back, we’ll wire the controls so both work without tripping each other.
Security Gate Installation
Security gates in Adrian are getting more common on acreage east and south of town, where a long driveway means nobody sees a visitor until they’re already at the house. We install steel security gates with operators, keypads, intercom, and camera wiring, plus loop detectors that can tell the difference between a sedan and a tractor. Safety photocells and entrapment protection come standard on every automatic gate we install in Adrian, not as an add-on.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Adrian
We’re certified to service nine major gate brands, including DoorKing, Viking, Ghost Controls, and Elite. That means when your Adrian gate operator fails, we can diagnose it and pull parts locally instead of waiting on a regional distributor. We keep common components on the truck for the brands we see most around Lenawee County, and for older operators that the manufacturer has discontinued, we often repair the board or motor in the shop rather than telling you to buy a whole new unit. Hal would rather fix what’s there than sell you something you don’t need.
Common Gate Installation Problems We See in Adrian Homes
- Frost-heaved posts knock swing gates out of plumb. Adrian’s continental climate cycles through repeated freeze-thaw from November through March, and posts set shallow will move. Once the post shifts, the gate binds on the operator rack and trips the safety photocell. We set posts below the frost line and check alignment on every install.
- Salt spray along US-223 and M-52 eats exposed hardware. Road salt kicked up by traffic accelerates rust on hinge posts, operator mounts, and the bottom rail of gates near those corridors. We use sealed bearings, galvanized or powder-coated hardware, and during installation we treat any steel that will sit within splash range.
- Mixed decorative-and-farm gate systems misconfigured on one parcel. Adrian’s rural-edge properties commonly pair a decorative driveway gate at the street with a heavy tube-steel or pipe farm gate further back. If the loop detectors aren’t tuned separately, a tractor trips the wrong gate, or a sedan sits at the farm gate while the driveway gate cycles. We configure each gate’s controls independently so they don’t fight each other.
- Undersized operators for heavy ornamental gates. The iron gates near downtown and Adrian College are often heavier than they look, and a homeowner-grade opener rated for a light chain-link gate will fail early. We weigh the actual gate, spec the operator for its true load, and leave margin for wind and ice.
Pricing for Gate Installation in Adrian, MI
Expect to pay between $1,800 and $4,500 for a standard single swing gate with a basic operator in Adrian, installed. A double driveway gate, or a gate with custom ornamental work, typically runs $4,000 to $6,500. Heavy steel farm or equipment gates on rural parcels land between $2,200 and $5,000, depending on width and whether you’re adding an operator. Custom fabricated gates matched to a historic Adrian home can go higher, because the work is one-off and the hardware is made to match the original, not ordered from a catalog. Every quote is written and agreed before any work starts, and the price we quote is the price you pay.
For a free written estimate on gate installation in Adrian, call (877) 610-2993. We’ll come out, measure the opening, check the frost line realities of your site, and hand you a number on paper.
We Also Serve Cities Near Adrian
Beyond Adrian, we install gates in Tecumseh, Milan, Lambertville, and Temperance. If you’re in one of those towns and your gate is acting up, the same crew that covers Adrian will head your way. Call (877) 610-2993 and a live person will get you scheduled.
Serving Adrian, MI - Our Local Coverage Area
We’re based in the Adrian area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Adrian
Yes. We can mount an operator on most existing ornamental iron gates in Adrian’s historic neighborhoods without cutting, drilling through, or replacing the original ironwork. We fabricate custom mounting brackets that clamp or bolt to existing structural points, and we tuck the arm and operator housing so they don’t change the look of the gate. When the original hinges are worn, we rebuild them rather than swap in modern replacements. Call (877) 610-2993 and we’ll come look at the gate in person.
We treat each gate on the parcel as its own system. The decorative street gate gets its own operator, its own loop detector settings, and its own safety photocells. The farm gate further back gets separate controls, heavier-duty hardware, and a detector tuned to distinguish a pickup from a tractor. We wire both to a single keypad or intercom at the driveway entrance so you don’t need two different remotes or two different call buttons. That dual setup is common south and east of Adrian, and we handle it in a single visit because we carry both ornamental hardware and agricultural-grade steel on the truck.
Yes, in most cases. A solar gate opener works on Adrian’s rural gates as long as the panel gets enough southern or southwestern exposure, and we size the battery bank for Michigan’s cloudy winter weeks, not a sunny July afternoon. The honest caveat is that heavy farm gates and high-cycle use in winter can exceed what a single-panel solar kit delivers, so we’ll calculate the true amp draw before we recommend it. If solar won’t reliably run the gate in January, we’ll say so up front and give you the trenching cost for line power instead. Call (877) 610-2993 for a site-specific answer.
The most common first-winter issue in Adrian is post movement from frost heave, which throws the gate out of alignment and causes the operator to bind or the safety photocell to fault. It happens when the post footing wasn’t dug below the frost line, which in Lenawee County means at least 42 inches. We dig to that depth on every install, use proper concrete, and backfill so water drains away from the post. If a gate we installed shifts during the winter, our 90-Day Done Right Promise covers correcting it, and we’ll be back out. Call (877) 610-2993 with questions about your specific site.
Yes. Every automatic gate we install in Adrian includes entrapment protection: safety photocells, a reversing mechanism, and proper warning signage, all set to current UL 325 standards. That’s not an option we upsell, it’s how the gate leaves our truck. Gate operators apply enough force to hurt someone, and we don’t install one without the safety edges and sensors that prevent that. If you have an older automatic gate in Adrian that lacks entrapment protection, call (877) 610-2993 and we’ll tell you what it would take to bring it up to standard.
If you’re ready to get a gate installed the right way in Adrian, call Gatewood Fence & Gate at (877) 610-2993. You’ll reach a live person, get a free on-site measure, and walk away with a written price that won’t change. Hal Gatewood’s name is on the shop, and he stands behind every gate we hang in Lenawee County.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Adrian and Lenawee County since 2001.