Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Welby
A driveway gate in Welby is not a luxury add-on. On acreage off Federal Boulevard and along Globeville Road, it is the line between your animals, your equipment, and the road. Gate installation in Welby usually runs $1,800 to $6,500 for a standard steel driveway gate with operator, and the work is measured, permitted where Adams County requires it, and scheduled – not rushed. Call (877) 610-2993 and we will come out, walk the site with you, and hand you a written price before any work starts.
We have been fixing and installing gates since 2001, and we know Welby’s quirks. The unincorporated Adams County side trips up contractors who assume Denver rules. The wind does its own thing here. The soil heaves. We account for all of it.
Why Gatewood Fence & Gate Is Welby’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is still on every invoice. That matters in Welby, where a lot of homeowners have been through the wringer with outfits that quote one number on the phone and a different one at the door. You will not get that here. The price we quote is the price you pay, in writing, before the first post hole goes in.
Welby customers call us because we answer the phone. A live person picks up, 24/7. Not a voicemail, not a routing queue. When you call about a gate that will not close on a winter night, you talk to someone who can actually help.
We have worked gates along the 80221 corridor for years – the post-WWII homes off 72nd, the acreage properties near the South Platte, the light-industrial edge along Federal. Our Gate Installation team knows which operators hold up when a gate sees both a Honda Civic and a box truck in the same afternoon.
Every job carries the 90-Day Done Right Promise. If it is not right, we come back and make it right. That is not a sales line. It is stamped on the paperwork.
Our Gate Installation Services in Welby
Sliding Gate Installation
Sliding gates are the workhorse for Welby acreage drives. They do not swing into a wind gust, and they handle wide openings without sagging at the hinge post. A typical sliding gate in Welby runs $2,800 to $6,500, depending on the opening width and whether you need a rack and pinion drive or a chain drive. On a long driveway off Federal Boulevard where mains power is not practical, we spec solar operators with battery backup so the gate still cycles in January when the sun is low and the days are short.
Swing Gate Installation
Swing gates are common on older Welby lots from the 1950s and 1960s, where the original chain-link or tubular-steel gate has been there since the property was carved out of farmland. A new single swing gate in Welby starts around $1,800; a double swing gate runs $3,000 to $5,800. The critical part is the footing. Welby’s freeze-thaw cycles heave posts on former agricultural soil, and a post set too shallow will lean within two winters. We set footings below frost line and brace the post for the wind load that comes screaming down the Front Range.
Solar Gate Opener Installation
For Welby driveways with no electrical service at the gate – and there are plenty along the rural stretches of 80221 – a solar gate opener is often the only realistic option. We size the panel and battery bank for Welby’s winter sun angle, not a summer ideal. An undersized solar setup leaves you with a dead gate on the exact days you need it most. A solar opener package with panel, battery, and actuator generally adds $800 to $1,600 to the gate install, and it keeps working through a string of short December days if it is speced right.
Pedestrian Gate Installation
We install walk-through gates alongside driveway gates on Welby properties, and as standalone entrances on smaller 80221 lots. A basic steel pedestrian gate runs $600 to $1,400 installed. If you are running cattle or horses, we spec latches that hold through wind and livestock pressure, and hinges that will not bind when the post shifts a quarter inch over a cold snap.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Welby
We install and service operators from DoorKing, LiftMaster, and Viking – three brands that hold up to the mixed residential-commercial use we see along Federal Boulevard and Globeville Road. When your gate goes down, you do not want to wait two weeks for a part from somewhere else. We keep common boards, gears, and remotes for these brands on the truck and in stock locally, so a Welby repair does not turn into a month-long parts hunt.
Common Gate Installation Problems We See in Welby Homes
- Shallow footings on former agricultural lots. The 80221 corridor was once farmland, and the expansive clay soil swells and shrinks through wet-dry and freeze-thaw cycles. A footing poured at 24 inches instead of below the frost line will heave a gate post out of alignment within a couple of seasons.
- Chinook wind damage on swing gates. Welby catches the downslope wind events that come off the Front Range, and an unsupported swing gate slammed against its stop will bend hinges and strip welds. We see this every late fall and early spring. The fix is a stouter post, a better latch, and sometimes a slide gate instead.
- Residential operators on commercial-duty gates. Plenty of Welby driveways serve both a family car and a contractor’s truck or equipment trailer, especially on the light-industrial edge. An operator sized for a suburban cul-de-sac will burn out motors and strip rack and pinion gears in two years. We spec commercial-grade hardware the first time.
- Solar systems sized for summer sun. A solar panel that charges fine in July will leave a gate dead at 6 pm in December. On Welby acreage, we size battery storage for the worst three weeks of the year, not the best ones.
Pricing for Gate Installation in Welby, CO
Here are straight numbers for Welby. A basic single swing gate on an existing post starts around $1,800. A double swing gate on new footings runs $3,000 to $5,800. A sliding gate with operator is $2,800 to $6,500. Solar packages add $800 to $1,600. A pedestrian gate is $600 to $1,400. These are installed prices, not a teaser quote that climbs at the door. The freight, the county permit where Adams County requires it, the concrete, the operator – all in the number. We are happy to give you a free written estimate before you commit to anything. And if you have a written estimate from another company, bring it to us for a free second opinion. No haggling required, either – $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Welby
Besides Welby, we install and service gates in Federal Heights, Sherrelwood, Shaw Heights, and Westminster. If you are a few minutes outside those lines, call anyway – if it is inside the county, there is no trip charge.
Serving Welby, CO - Our Local Coverage Area
We’re based in the Welby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Welby
Yes, in most cases. Welby is unincorporated Adams County, not Denver, so any gate installation with structural footings or an electric operator falls under Adams County Land Development codes. We handle the permit and inspections as part of the job. Call (877) 610-2993 and we will tell you exactly what your specific site requires.
Yes. Solar gate openers are a standard installation for us on Welby acreage where running power to the gate is impractical or too expensive. We size the panel, battery bank, and operator for Welby’s winter sun angle so the gate keeps cycling through short December days. We can assess your site and spec the system for a free estimate.
A sliding gate is usually the best choice for windy, exposed Welby lots. It does not swing into a gust, so it avoids the hinge and weld damage that plagues swing gates during downslope wind events. The footing still matters – we set it below frost line to resist heave. For a swing gate, we over-spec the post and use heavy-duty hinges. Call (877) 610-2993 and we will look at your specific exposure.
Spec commercial-grade hardware, even if it looks like a simple home driveway. That means a heavier post, a commercial-duty operator, and hinges or rollers rated for daily truck traffic. On mixed-use Welby drives along the Federal Boulevard corridor, a residential operator will fail early. We size the gear for the heaviest vehicle that will use the gate, not the lightest.
Yes. Any automated gate along an acreage entrance needs safety photocells to stop and reverse if something is in the path – a child, a dog, a piece of equipment. It is also a code requirement. We install photocells and edge sensors as standard on every automated gate in Welby, and we test them before we leave the site. Call (877) 610-2993 to talk through your specific gate.
If you are in Welby and your gate needs to be replaced or upgraded, call us at (877) 610-2993. Hal Gatewood has been doing this since 2001, and the name is on the shop – that is the oldest accountability there is. Estimates are free, and the price we quote is the price you pay.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Welby since 2001.