Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Welby
Gate Installation - Welby parts and welding work runs between $180 and $850 for most hinge, post, and rail repairs, with custom welding jobs falling between $250 and $1,200 depending on the extent of the damage and the hardware involved. We get to Welby properties quickly because our crew knows the 80221 corridor well, and we have been fixing gates in unincorporated Adams County long enough to know which failures repeat every spring. If your gate is sagging, binding, or making noise it shouldn’t, call us at (877) 610-2993 and a live person will answer, day or night.
Key Takeaways
- Hinge replacement in Welby typically runs $180-$340 per hinge, including on-site welding and alignment.
- Post replacement starts around $350 and goes up based on footing depth, concrete condition, and whether we’re dealing with a lean from freeze-thaw shift.
- Custom welding on existing gate frames starts at $250 and is quoted before any work begins.
- Welby sits in unincorporated Adams County, so structural gate work falls under county permitting rules, not Denver’s.
- We service Linear, Viking, and Ghost Controls operators in Welby and stock parts locally for fast turnaround.
Why Gatewood Fence & Gate Is Welby’s Preferred Gate Parts & Welding Company
Welby is the kind of place where people still wave at each other from across Globeville Road, and that’s the kind of accountability we grew up on. Hal Gatewood started this shop in 2001, and his name is on every invoice and every truck that pulls into a Welby driveway. The person who shows up to weld your gate is the same person you’ll see at the hardware store next month. That matters here, where a handshake still means something and where a gate that won’t close right is the first thing you notice when you pull up to your own property.
We answer every call with a live person, 24 hours a day. That’s not a call center and it’s not a voicemail. It’s someone from our shop, and if we’re already on a job in Welby, we’ll tell you straight when we can get to you. Our Gate Parts & Welding team has fixed gates along Federal Boulevard, on the quiet side streets off Riverdale Road, and up against the light-industrial edge where Welby meets the railroad tracks. That mix of residential and commercial use is exactly the kind of local pattern that tells us what hardware your gate really needs.
We’re licensed, insured, and bonded. Our crew is background-checked and wears a uniform so you know who’s walking onto your property. And every job, in Welby or anywhere else in the county, carries the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. One call, no runaround.
Our Gate Parts & Welding Services in Welby
Hinge Replacement
Most gates in Welby sag because the hinge post has leaned, not because the gate frame is bad. A hinge replacement here means cutting the old hardware off, checking the post for square before we weld anything back on, and setting new hinges at the right load points. On the 1950s-era steel tube gates common throughout the 80221 corridor, we see hinges that were undersized from the start. In Welby, a hinge replacement typically runs $180 to $340 per hinge, and the price is agreed before the torch comes out.
Post Replacement
Here’s the thing about gate posts in Welby: the ground moves. Freeze-thaw cycles at 5,200 feet heave posts just enough every winter that by spring, a post that was plumb in October is leaning two inches. Adams County code applies to any post replacement with structural footings, which means we set depth and concrete per county standards, not Denver’s. That jurisdictional line trips up a lot of contractors who work mostly south of 52nd Avenue. Welby homeowners who’ve had a Denver-based crew quote a post swap have sometimes found themselves with a permit problem on their hands. We know the difference because we work here every week. Post replacement in Welby starts around $350 and runs up from there based on footing depth and access.
Rail Repair
Bottom rails take the worst of it on Welby gates, especially along the Federal Boulevard corridor where properties see truck access. A rail that’s been caught by a trailer hitch or knocked loose by a snowplow wing eventually tears at the weld points. We cut back to clean metal, straighten the frame where it’s still straightenable, and weld in new material. If the rail is past saving, we’ll tell you that too, and we’ll quote the replacement honest. Rail repair work in Welby generally lands between $200 and $450 depending on length and whether we’re patching or replacing.
Custom Welding
Some of the best work we do in Welby doesn’t have a catalog part number. It’s a gate that was welded in place by a previous owner in 1972, with odd spacing and a latch that doesn’t exist anymore. It’s the kind of thing a national outfit would tell you to replace. We’d rather fix it. On a property off Federal Boulevard near the residential-light-industrial edge, our crew replaced a bent hinge post and re-welded the bottom rail on a heavy tubular-steel swing gate that a Chinook wind event had slammed hard against its stops. The gate had seen daily residential use plus occasional commercial truck access, so we upgraded to commercial-grade hinges and reinforced the post footing to stop the repeat sag correction calls. Custom welding in Welby starts at $250 and rarely exceeds $1,200 unless the frame is beyond reasonable repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Welby
If your gate has a Welby Gate Motor & Opener, there’s a good chance it’s one of the brands we’re certified to service. We work on Linear, Viking, and Ghost Controls systems regularly on Welby properties, and we stock common parts for those brands locally so you’re not waiting a week on a backordered board. DoorKing units show up on some of the older commercial and mixed-use gates along the Federal Boulevard edge, and we handle those too. When a Ghost Controls arm starts clicking and the gate won’t move, having someone local who can test it same-week instead of shipping it off matters. We also handle the wiring, safety edges, and photo eyes that come with any operator work.
Common Gate Parts & Welding Problems We See in Welby Homes
- Hinge posts leaning from freeze-thaw ground shift. Decades of winters at 5,200 feet push posts out of plumb. We reset the post to Adams County footing depth, then square the gate to the new post rather than shimming the hinges.
- Welds stripped by Chinook wind events. Those downslope winds that tear through in late fall and early spring slam unsupported swing gates against their stops with surprising force. We see bent hinge leaves and cracked welds on the exact same gates every year.
- Mixed residential-light-industrial wear on Federal Boulevard corridor properties. A gate that handles daily family traffic plus occasional truck access wears hinges, rollers, and latches far faster than a purely residential gate. Commercial-grade hardware is often the right fix even on what looks like a simple driveway gate.
- Manual agricultural-era gates that were never meant to be automated. Many Welby homes sit on lots carved from old farm ground, and the original tube-steel swing gates are heavy. When someone without county knowledge adds an opener to a gate like that, the result is usually a burned-out motor and a gate that still doesn’t move.
Pricing for Gate Parts & Welding in Welby, CO
We quote every job before the work starts. No surprises on the invoice, no “well, the guy found something else.” Here’s what you can expect in Welby:
- Hinge replacement: $180-$340 per hinge
- Post replacement with new footing: $350-$800 depending on depth and access
- Rail repair (patch or replacement): $200-$450
- Custom welding on existing gate frames: $250-$1,200 depending on scope
- Latch and lock replacement: $140-$300 including hardware
- Gate roller replacement: $160-$380 per roller depending on gate weight
We also honor standing offers that don’t require haggling: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. A free estimate in Welby is just a phone call away at (877) 610-2993.
We Also Serve Cities Near Welby
If you’re in Gate Parts & Welding in Welby or just outside it, we cover a lot of ground. Our crews regularly work in Federal Heights, Sherrelwood, Shaw Heights, and Westminster. Most of those neighborhoods share the same gate problems, the same freeze-thaw cycles, and the same county permitting considerations. So if your gate is in one of those areas and it’s acting up, the same crew and the same written promise apply.
Serving Welby, CO - Our Local Coverage Area
We’re based in the Welby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Welby
A gate post replacement in Welby falls under Adams County Land Development codes because Welby is unincorporated Adams County, not a City of Denver address. That means footing depth, concrete specifications, and any associated electrical work for an operator all follow county standards, and contractors used to working just south on the Denver side often miss this. We handle the county requirements as part of the job, so you’re not left holding a code violation you didn’t know about. Call (877) 610-2993 if you’re not sure whether your gate project needs a permit.
Welded gate hinges on older Welby properties fail because decades of freeze-thaw cycles have shifted the hinge post out of plumb, and the hinge welds end up carrying a bending load they were never meant to handle. Add a Chinook wind event or two each fall, and the leverage on those welds eventually cracks them. The fix is not just re-welding the same hinge in the same spot. It’s resetting the post to square, then welding new hardware at the correct load points. If your gate keeps eating hinges, the post is the problem. Call (877) 610-2993 and we’ll come look at the whole gate, not just the broken weld.
Yes, a properly sized solar gate opener can handle a wide farm-style swing gate in Welby, but only if the operator is matched to the gate’s actual weight and wind load, not just its width. The heavy tubular-steel gates common on Welby’s older agricultural-era lots need operators rated for the extra mass, plus adequate battery storage for the short, cold days we get in December and January. We service Linear, Viking, and Ghost Controls solar units, and we spec the load honestly. Call (877) 610-2993 and we’ll measure the gate and tell you what will actually work.
In Welby, repairing the hinge post on a sagging gate is usually the smarter money, because the gate frame itself is often still sound even when the post has leaned. A post replacement with a proper county-depth footing runs $350 to $800, which is a fraction of what a whole new gate installed costs. If the frame is rotted through or the rails are beyond straightening, we’ll tell you that honestly. But most of the sagging gates we see in the 80221 corridor need a post reset, not a gate replacement. Call (877) 610-2993 for a free evaluation.
If you add an operator to a manual farm gate in Welby, yes, you need Gate Access Control in Welby with entrapment protection, and it’s not a suggestion. Adams County follows the same safety standards as the rest of the state on automated gates, which means photo eyes or contact edges, force settings that reverse on obstruction, and audible warning when the gate is in motion. A gate that was manual its whole life isn’t grandfathered in when you add a motor to it. We handle the full operator install with the entrapment protection included, not as an upcharge. Call (877) 610-2993 if you’re thinking about automating a gate that’s been manual for decades.
Get Your Gate Fixed Right the First Time in Welby
If your gate is sagging, binding, or just not closing the way it used to, we’ll come out, look at it in person, and tell you exactly what it needs and what it costs before any work begins. No high-pressure replacement pitch. No invoice surprise at the door. Just a straight answer from a locally owned shop that’s been doing this since 2001, with Hal Gatewood’s name on every job. Call (877) 610-2993 for a free estimate, and you’ll talk to a live person, not a machine. We serve all of Welby and the surrounding Adams County communities, and we’d be glad to put our name on your gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Welby since 2001.