Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Smyrna
Gate installation in Smyrna typically runs $2,800 to $9,500 for a full replacement, depending on whether we’re hanging a single ornamental steel driveway gate or rebuilding a double community-entry swing gate with new operators, posts, and safety edges. Most jobs we quote in the 30080, 30081, and 30082 zip codes are replacements of 15 to 25-year-old aluminum and steel gates that have simply reached the end of their service life, not fresh installs on new construction. We know Smyrna’s neighborhoods, its HOAs, and the particular failure patterns this town throws at gate hardware. If you need a straight answer and a price that holds, call (877) 610-2993 and Hal will talk you through it.
Key takeaways:
- Free written estimates with the price agreed before any work starts
- On-site welding, so your gate stays in your driveway, not a shop across town
- 90-Day Done Right Promise in writing, on every single job
- Live person answers the phone, 24/7, and it’s not a call center three states away
Why Gatewood Fence & Gate Is Smyrna’s Preferred Gate Installation Company
The name on the shop is Hal Gatewood, and he’s been at this since 2001. We’re a local, owner-operated outfit offering Gate Repair - Smyrna that other companies want to replace. That matters in Smyrna because so much of the gate work here isn’t a simple remove-and-swap. It’s a 20-year-old HOA swing gate with a dead control board and posts that red clay has slowly pushed out of plumb. Hal will tell you straight when a retrofit makes sense and when replacement is the cheaper answer over five years.
Smyrna homeowners and property managers call us for Gate Parts & Welding in Smyrna because we weld on site. The gate doesn’t get hauled to a shop. The crew shows up in service trucks, sets up, and fixes the thing in your driveway or at your community entrance. We service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your HOA has three different operators failing at once, that’s our bread and butter.
Every job gets a written 90-Day Done Right Promise. If it’s not done right, we make it right, one call and Hal comes back. No runaround. Plus standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside Cobb County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. You can also drive to the shop and look Hal in the eye. The address is published, not hidden behind a PO box.
Our Gate Installation Services in Smyrna
Our Gate Installation team handles everything from single driveway gates to full multi-entrance HOA rebuilds. Here’s what we do most in Smyrna.
Driveway Gate
Driveway gates in Smyrna’s older ranch neighborhoods off Atlanta Road and South Cobb Drive are often the original 1960s steel or the first wave of ornamental aluminum from the 2000s. The aluminum ones corrode at weld points, the steel ones rust from the bottom up. We install new driveway gates with powder-coated finishes and operators sized correctly for the gate’s weight and cycle count. The job includes new post footings when the existing concrete has failed.
Pedestrian Gate
Pedestrian gates in townhome communities around Spring Road take a beating. They cycle dozens of times a day, and the hinges and magnetic locks usually fail before the panel does. We install pedestrian gates with self-closing hinges, our Gate Access Control in Smyrna, and safety edges that meet current code. If you’re an HOA board member, we’ll document everything for your records before and after.
Sliding Gate
Sliding gates are less common in Smyrna than swing gates, but they show up on commercial lots and a handful of newer gated subdivisions. A sliding gate that won’t slide is usually a wheel or track problem compounded by red clay silt working into the rail. We install cantilever and V-track sliding gates and set the track on deeper concrete than the original, because Smyrna’s soil moves more than most people realize.
Swing Gate
This is the big one for Smyrna. The late-1990s through mid-2000s building boom seeded hundreds of HOA-governed communities with ornamental aluminum and steel swing gates at their entrances. Those gates are now 15 to 25 years old and hitting simultaneous end-of-life for operators, hinges, and coatings. We install and re-hang swing gates on new hinge posts with deeper footings, then set operators from DoorKing, LiftMaster, or Viking with modern safety photocells. The gate latches square when we’re done, not cocked at a half inch because a post settled.
Double Gate and Security Gate
Double swing gates are the most common security gate in Smyrna’s gated subdivisions. Two leaves, two operators or one master, and a lot of hardware that has to stay aligned. We re-hang both leaves on fresh hinges, sync the operators, and install edge sensors so the gate doesn’t close on a car or a kid. Security gate installations here almost always involve HOA sign-off, so we provide the paperwork, the photos, and the product spec sheets the board needs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Smyrna
We’re certified on nine major gate brands, and in Smyrna we see a lot of older DoorKing equipment, Ghost Controls on residential driveway gates, and Viking operators on community entrances. We also keep common control boards, safety edges, and receiver modules on the truck, so we’re not waiting on a delivery from California while your gate hangs open. If your operator is one of the early-2000s models that manufacturers stopped supporting, we’ll tell you that on day one, not after you’ve paid for a band-aid fix.
Common Gate Installation Problems We See in Smyrna Homes
Here’s what we run into most often when we get called out for a gate installation or full replacement in Smyrna:
- Legacy operators with no available control boards. Many early-2000s swing gate operators in Smyrna’s HOA communities are orphaned: the manufacturer moved on, the control board is discontinued, and the only fix is a full operator swap. We’re straight about that. A $600 board that doesn’t exist is not a repair plan.
- Hinge posts out of plumb from Georgia red clay. Smyrna’s soil expands when saturated and contracts in dry summers. That cycle slowly shifts gate posts, and the gate drags, or won’t latch, or sags in the middle. Fix the panel without the post and you’ll fix it twice.
- Ice-storm damage from Cobb County’s winter events. The 2014 storm and smaller freeze events since have cracked operator housings, seized hinge pins, and stripped gears on gates that kept cycling in freezing rain. HOAs see a surge of failures right after the thaw, and we handle those in clusters.
- Weld-point corrosion on ornamental aluminum. Georgia’s humid subtropical climate accelerates oxidation on uncoated iron and aluminum hardware year-round. We re-weld on site and powder-coat the repair so it doesn’t look patched.
Pricing for Gate Installation in Smyrna, GA
Here’s what gate installation work actually costs in Smyrna, based on the jobs we do here:
- Single driveway swing gate with operator: $2,800 to $5,500
- Double community-entry swing gate, two operators, new posts: $5,500 to $9,500
- Sliding gate with track and operator: $4,000 to $8,000
- Pedestrian gate with keypad access: $1,800 to $3,500
- Operator swap only (retrofit existing gate): $1,200 to $2,800
The price you’re quoted is the price you pay. We don’t call from the driveway with a “revised scope.” The number we agree on before we start is the number on the invoice when we leave. Free estimates, and if you already have a written estimate from another company, we’ll give you a free second opinion on it, no obligation.
We Also Serve Cities Near Smyrna
We run crews to Smyrna daily, plus the surrounding communities: Mableton, Fair Oaks, Austell, and Marietta. If you’re just outside the city line and wondering whether we’ll come out, we do, and there’s no trip charge inside Cobb County. Call (877) 610-2993 and we’ll tell you when the crew can be at your gate.
Serving Smyrna, GA - Our Local Coverage Area
We’re based in the Smyrna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Smyrna
Yes, we retrofit old swing gates regularly, but the answer depends on the operator model. If the control board is still available and the gate structure itself is sound, we can add modern safety photocells, new edge sensors, and a new receiver without swapping the whole unit. That typically runs $800 to $2,000, depending on the age and brand. But if your operator is an orphaned early-2000s DoorKing or Viking with no available board, a full operator swap is the cheaper answer over five years. Call (877) 610-2993 for an exact quote, estimates are free.
Because the original footings weren’t deep enough for Smyrna’s soil. Georgia red clay expands when wet and contracts when dry, and a footing that stops eighteen inches down moves with it. We dug new post footings for a double swing gate off Spring Road after the original posts had shifted out of plumb for the second time. The fix is deeper concrete, below the shrink-swell zone, not just re-setting the post. We’ll tell you honestly whether your posts need the same treatment before we hang a new gate on them.
We do this constantly in Smyrna. The late-1990s and 2000s HOA gate boom means many communities have three or four community entrances all aging out at the same time. Hal will walk the property, document each gate’s condition, and give the board a prioritized list: what fails first, what can wait, and what the costs look like as one job versus three. We handle the paperwork, the product specs, and schedule the work around your budget. This is exactly the kind of job where our Gate Installation experience pays for itself.
Sometimes, yes. If the motor and gear train are still solid, we can replace the housing, straighten or replace the arm, and get the gate cycling again for $400 to $900. But if the gears stripped because the gate was forced open by emergency vehicles or residents during the freeze, the repair bill climbs fast, and a replacement operator is often the better money. Our crew recently replaced a DoorKing unit at a townhome community off Spring Road after the 2014 ice storm stripped its gears, and the board had been telling the story since the first hard freeze. The price you’re quoted is the price you pay, and we’ll tell you which way to go before we touch a thing.
Usually, yes. A gate sags in the hinge post, not in the middle, and that’s where we start. If the post has shifted out of plumb, even by a half inch, the gate will drag and the latch won’t catch, no matter how many times you adjust the hinges. In Smyrna, posts move because the red clay beneath them moves. We re-hang the gate with new hinge posts set in deeper concrete, and that wrong half inch becomes square again. The first step is a free look: call (877) 610-2993 and Hal will tell you what he’d do and what it costs.
If your gate is old, sagging, or dead, call (877) 610-2993 for a free estimate from a company that answers the phone with a live person, shows up when promised, and stands behind every job with a written 90-Day Done Right Promise. We install driveway gates, security gates, swing gates, and full HOA entrance rebuilds all over Smyrna, Mableton, Austell, Fair Oaks, and Marietta. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Smyrna and the surrounding metro area since 2001.