Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pelham Manor
A new driveway gate in Pelham Manor is a bigger decision than most buyers realize. The village’s pre-WWII estate homes, stone pillars that have been settling since the 1920s, and salt air rolling in from Long Island Sound all shape which gate goes in, how it’s hung, and whether it will still track true five winters from now. We’ve been building and hanging gates since 2001, and we’ve learned that a gate in Pelham Manor doesn’t fail in the middle of the panel. It fails where the hinge post meets a century-old pillar that has tilted a few degrees out of plumb. If you’re planning a gate installation in Pelham Manor, call Hal at (877) 610-2993 and you’ll get a live person, a straight answer on timing, and a written price before anyone starts digging.
Why Gatewood Fence & Gate Is Pelham Manor’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is still on the door and on every invoice. That’s not a marketing line. It means when something isn’t right, the person you call knows exactly which job you’re talking about because he was the one who walked your property and took the measurements. We don’t subcontract gate installation to a rotating crew. Hal or a background-checked member of his crew shows up in a Gatewood Fence & Gate truck, wearing a uniform, and does the work in your driveway, not on a loading dock somewhere.
Pelham Manor homeowners keep our number because we repair before we replace. If a hinge post has corroded at the base, we’ll cut out the bad steel and weld in new stock on site rather than telling you the whole gate needs to go. That’s a different conversation than you’ll get from a company that wants to sell you a new panel. The 90-Day Done Right Promise covers every installation, in writing. If the gate binds, sags, or stops holding adjustment within 90 days, one call brings Hal back. No runaround, no “we’ll put you on the schedule.”
Response time to Pelham Manor is typically same-week for scheduled installations. If a gate fails and you can’t get your car out, we treat that as urgent and we’ll be there fast. The phone rings to a live person 24 hours a day, seven days a week. Not a voicemail, not a call center three states away. A person.
Our Gate Installation Services in Pelham Manor
Every installation starts with the pillar and the post, not the gate. That’s the part most Pelham Manor driveways teach us over and over. Fix the panel without checking the post and you’ll fix it twice. Here’s what we install most often across the village.
Sliding Gate Installation
A lot of Pelham Manor properties sit on narrow lots where a swing gate physically can’t open without blocking the sidewalk or hitting a neighbor’s fence line. A sliding gate rides on a track and takes up no swing arc, which makes it the right call on shared driveways and tight rights of way. But on the Manor’s older properties, the post footing sits in soil that’s been freezing and thawing for decades. If the footing has heaved even an inch, the rack and pinion will bind and the gate will stop mid-travel. We pour and set the post footing in fresh concrete below the frost line before we hang any sliding gate. That’s not optional here. It’s the difference between a gate that works for four months and one that works for twenty years.
Swing Gate Installation
Swing gates are the classic look for Pelham Manor’s Tudor and Colonial Revival homes, and they belong on the formal entries along Boston Post Road and the curving streets off Pelhamdale. A double swing gate on stone pillars is beautiful when it’s right, and infuriating when the pillar has shifted so the leaves don’t meet in the middle. Here’s what we tell every Pelham Manor customer: a swing gate sags in the hinge post, not in the middle. If the post has moved, no new hinge will save it. We re-plumb or repoint the pillar, set the post, then hang the leaves so they close with a clean gap and hold it through a nor’easter.
Double Gate Installation
Wider driveways in Pelham Manor, especially on estate lots where two cars park side by side, usually need a double gate rather than one wide leaf. A single leaf that spans twelve or fourteen feet puts enormous leverage on the hinge post, and on a frost-heaved stone pillar that’s a failure waiting to happen. We build double gates as two balanced leaves that meet at a center stop, and we pair them with a matched set of operators so both sides open and close in rhythm. The lift is distributed across both posts, which matters when both posts are original to a house built in 1927.
Pedestrian Gate Installation
Not every gate in Pelham Manor is for a car. The formal gardens and side-yard entries that define the village’s period landscaping often call for a pedestrian gate alongside the driveway gate or a standalone walk gate between two stone piers. These are smaller projects, but they need the same care at the post. We weld custom frames to fit the opening, match period-appropriate hardware, and set walk-gate posts so the latch engages cleanly even after the ground settles. A pedestrian gate should feel solid when it closes, not like it’s leaning on the latch for support.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelham Manor
We install and service gate operators from Linear, DoorKing, and Ghost Controls, among others. If you already own an operator and you’re replacing the gate, we can usually reuse the motor and electronics if they’re in good shape, which saves you real money. Hal is certified to work on nine major brands, and we keep common parts stocked for Pelham Manor customers so a same-week install doesn’t turn into a three-week wait because a control board had to be ordered from across the country. If a part is local, we use it. If it’s not, we tell you when it’s coming and what it costs before we order.
Common Gate Installation Problems We See in Pelham Manor Homes
- Frost-heaved stone pillars that throw the gate out of plane. The curving residential streets of the Manor hold thousands of century-old stone pillars. Repeated freeze-thaw cycles tilt them a few degrees, and suddenly a gate that closed perfectly in October won’t clear the opening in March. The gate looks broken. It isn’t. The pillar needs re-plumbing before any hinge work will hold.
- Salt-air corrosion at hinge posts and latch bolts. Pelham Manor sits less than a mile from Long Island Sound. That salt-laden air attacks iron hardware far faster than it would in White Plains or Tarrytown. We regularly cut corroded steel out of hinge posts and weld in new stock. The gate panel itself is usually fine.
- Sliding gates binding on narrow shared driveways. When a right of way is tight and the post footing has heaved, the rack and pinion grabs and the gate stalls halfway down the track. The fix starts at the footing, not the motor.
- Operators that quit after a coastal storm. Nor’easters push salt spray and moisture into control boards and limit switches. If your operator stopped working after a storm, the first thing we check is whether moisture got into the electronics, and the second thing we check is whether the gate itself is still in alignment. A misaligned gate will kill a new motor just as surely as the old one.
Pricing for Gate Installation in Pelham Manor, NY
A basic single swing gate installation in Pelham Manor typically runs $1,800 to $3,200, including the gate, posts, hinges, and labor. A sliding gate runs higher, usually $2,600 to $4,500, because the track and the post footing demand more preparation, especially on older lots where the soil has shifted. Double driveway gates fall in the $3,500 to $6,000 range for the full hang, not counting any pillar work. If your stone pillar needs re-plumbing or repointing, that’s typically $500 to $1,400 depending on the condition. We quote the price up front, in writing, and it doesn’t change at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and Hal will give you an exact number for your property, free.
What Actually Affects the Cost in Pelham Manor
- Pillar condition. If the pillar has shifted out of plumb, we have to correct it before we can hang anything. That’s the single biggest variable on Manor properties.
- Gate style and steel weight. Ornamental wrought iron with period detailing costs more than a simple steel frame, and it’s worth it on a 1925 Tudor.
- Operator and safety equipment. Loop detectors, photocells, and keypad entry add to the total. On a shared driveway, safety edges aren’t optional, they’re required to prevent a crushing injury.
- Electrical run distance. If your driveway gate sits a hundred feet from the nearest power source, you’ll need a longer line run or a solar option. Solar operators are common on Pelham Manor properties where trenching would tear up old landscaping.
We Also Serve Cities Near Pelham Manor
The same crew that handles Pelham Manor installations regularly works in Pelham, Mount Vernon, New Rochelle, and Baychester. If you’re just outside the village line and need someone who understands coastal Westchester soil and period housing stock, this is our territory. Our full Gate Installation team serves the whole area without farming work out to strangers.
The Pillar Problem: Why Pelham Manor Gates Fail Differently
Here’s what you won’t hear from a big-box gate installer. The defining site condition in Pelham Manor isn’t the gate at all. It’s the stone pillar the gate hangs from. Many of these pillars were set before the First World War, on footings that were shallow by modern standards. Every winter, water gets into the mortar joints and the top layer of soil. It freezes. It expands. It pushes on the pillar. Over twenty or thirty winters, that pillar tilts a few degrees out of plumb. The gate leaf, still hinged to the pillar, tilts with it. Suddenly the gate drags on the ground, or the latch won’t catch, or the two leaves of a double gate strike each other before they close.
A gate that looks broken is often just a pillar that needs re-plumbing before any hinge or track work will stay true. We learned this pattern on Pelham Manor’s curving streets, and we build every installation around it. On a recent job just off the Boston Post Road corridor, we hung a custom double swing gate on stone pillars that had tilted badly from freeze-thaw cycles. Before we set the first hinge post, our crew re-plumbed and repointed the pillar, then installed a LiftMaster operator with a loop detector and safety photocells so the gate held alignment and the owner’s daily entry stayed working throughout the install. Fix the panel without the post and you’ll fix it twice. Show me a gate closing on its own and I’ll show you where it’s failing.
Salt Air, Shared Driveways, and Getting the Hardware Right
Living less than a mile from Long Island Sound shapes everything about gate hardware in Pelham Manor. The village’s 10803 ZIP code sits close enough to the water that iron hinges, drop rods, and latch bolts develop rust blooms in a season, not in a decade. Newer suburbs inland can hang an off-the-shelf iron gate and forget it. You can’t do that here. We specify galvanized steel posts, powder-coated hardware, and stainless fasteners on every Pelham Manor installation, because painting over rust doesn’t stop the rust. It just hides it until the gate sags.
Shared driveways add their own complication. A lot of the older Manor properties have a single drive serving two homes, often with a narrow apron where the drive meets the street. A swing gate on a shared drive has to clear the neighbor’s car, the neighbor’s fence line, and the sidewalk, all at once. Often it can’t. That’s when a sliding gate becomes the answer, but only if the footing is deep enough to take the rack without heaving. We’ve pulled old gates off shared driveways in Pelham Manor where the previous contractor poured a four-inch post in a six-inch hole and called it done. The gate worked for one winter. Hal won’t leave a job like that behind him.
Serving Pelham Manor, NY - Our Local Coverage Area
We’re based in the Pelham Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Pelham Manor
We re-plumb the pillar before we touch the gate. That means excavating around the footing, resetting the pillar true with new mortar, and letting it cure before we hang any weight on it. A hinge on a tilted pillar will bind no matter how well it’s welded. This is the single most common correction we make on Pelham Manor properties. Call (877) 610-2993 and Hal will tell you whether your pillar needs work or just adjustment, and what it’ll cost before any work starts.
Yes, and it’s a common fix. A sliding gate needs no swing arc, so it fits narrow aprons and rights of way a swing gate can’t clear. The key is the post footing. We pour concrete below the frost line and anchor the track to a footing that won’t heave, because a sliding gate that binds mid-travel is almost always a footing problem, not a motor problem. Estimates for sliding gate installation in Pelham Manor are free.
Start with galvanized or stainless steel wherever water can sit, including hinge barrels, latch bolts, and drop rods. We use powder-coated panels and seal any exposed welds. Corrosion doesn’t start on the flat face of a gate. It starts in the joints where moisture and salt linger. On a Pelham Manor gate, the right metal and the right coating matter more than the brand name on the operator.
It’s usually the alignment, and the motor died trying to push a gate that couldn’t go anywhere. Nor’easters drive salt spray into control boards, but they also pound a gate leaf into the wind repeatedly, and any existing misalignment gets worse fast. We check the gate travel first, then the board. If the motor itself is dead, we can match a replacement to your existing brand, often same-week for Pelham Manor customers. Call (877) 610-2993 for a straight answer. The second opinion on any written estimate is free.
Yes. Keypad entry, intercoms, and solar operators are regular parts of security gate installations here, especially on larger estate properties where running conduit would tear up old boxwood and stonework. A solar operator with battery backup keeps the gate working through the coastal weather that knocks out grid power. We install DoorKing and Ghost Controls operators regularly, and we can match your existing system.
Get a Free Estimate for Gate Installation in Pelham Manor
If you live in Pelham Manor and you’re thinking about a new driveway gate, pedestrian gate, or security gate, start with a conversation, not a sales pitch. Call Hal at (877) 610-2993. You’ll get a live person, a real answer about your property, and a written price quoted and agreed before any work starts. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. We offer free estimates, no trip charge inside the county, and a 90-Day Done Right Promise in writing on every install. If you’re comparing against another quote, bring it in. A second opinion on any written estimate is free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pelham Manor since 2001.