Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Parkway
Gate installation in Parkway, CA starts with understanding what the ground under your gate is doing. Flat valley-floor clay that swells in wet winters and shrinks through 100°F+ summers will heave a hinge post out of plumb within one season if the footing isn’t right. That’s the problem most gate installers miss, and it’s the one we solve first. Hal Gatewood has been at this since 2001, and the name is on the shop. If you need a driveway gate, double gate, or security gate that stays square through the clay cycle, call us at (877) 610-2993 for a free estimate.
Why Gatewood Fence & Gate Is Parkway’s Preferred Gate Installation Company
We don’t dispatch someone from three counties away. Parkway is home to the kind of gates we’ve been building and fixing for decades, and when you call, you get a live person. Every job carries the 90-Day Done Right Promise in writing. If the gate isn’t right, one call brings us back.
The 95823 area is full of 1960s and 1970s ranch-style tract homes, and the homesteads along the long dirt driveways off the main roads run wide double gates and sliding gates on clay that does not hold still. A gate installed without checking the post footings will sag and bind. We check the post plumb and backfill before we order a single piece of hardware.
We’re certified on nine major gate brands, including FAAC, BFT, Linear, and Viking, and we keep parts local so turnaround doesn’t stretch out. Hal’s crew is background-checked, uniformed, and shows up in the window we promise. Parkway homeowners have dealt with the other kind; that’s why they call us back.
Our Gate Installation Services in Parkway
Driveway Gate Installation
A driveway gate in Parkway on a long rural lot has to handle more than traffic. The clay under the driveway heaves and shrinks, and a gate hung on posts set too shallow will drag within a year. We set posts in deeper concrete footings with compacted gravel backfill, then hang the gate so the latch side stays clear through every wet-dry cycle.
Pedestrian Gate Installation
Pedestrian gates in Parkway’s ranch neighborhoods wear hard at the hinges and latch because of the seasonal ground movement. We match the gate to the existing fence line, re-set hinge posts where they’ve moved, and use hardware that won’t corrode after a decade of tule fog winters.
Sliding Gate Installation
Sliding gates on long Parkway driveways fail early when the rack and pinion alignment is off on a shifting clay pad. We lay the track on a properly compacted base and align the rack so the gate rolls clean through one wet-dry cycle without binding or stripping. A solar operator on a sliding gate out here is often the right call when running power means trenching through clay that’s already moved older posts.
Swing Gate Installation
Double swing gates are the most common gate we install in Parkway, and they’re the first to sag at the latch side when hinge posts heave. We check post plumb before anything else. On wide farm gates, we’ll size openers for the actual weight and span, not what the box says.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Parkway
Our team is certified to service FAAC, BFT, Linear, and Viking operators, along with Ghost Controls, LiftMaster, DoorKing, Elite, and Mighty Mule. That matters in Parkway because the right operator for a 16-foot swing gate on clay isn’t the same as one for a 12-foot gate on stable soil. We stock local parts for these brands so if something fails under warranty, you aren’t waiting on a truck from out of state. Hal’s been working on these systems long enough to know which operator holds up on a wide gate with a solar panel mounted under mature oak shade.
Common Gate Installation Problems We See in Parkway Homes
- Sagging wooden swing gates on 40-60 year old ranch homes. The clay pushes hinge posts out of square, and the panel drags and binds. Fixing the panel without re-setting the post means fixing it twice.
- Solar gate openers undercharging by late afternoon. Mature oaks on Parkway’s older lots throw a north-facing shade line that kills panel output. We check the sun path before mounting a panel, or the gate ends up stuck open for livestock.
- Sliding gate racks binding or stripping within one wet-dry cycle. If the concrete pad shifts, the rack and pinion misalign. We compact the base and align the rack so it survives the clay movement.
- Double gates sagging at the latch side. This is almost always a hinge post that has heaved. We re-set the post in a deeper footing with compacted gravel backfill, then hang the gate so the latch clears by a thumb’s width.
Pricing for Gate Installation in Parkway, CA
A typical pedestrian gate installation in Parkway runs $450-$900 depending on width and hardware. A single swing driveway gate on a new post set runs $1,200-$2,500. Double swing gates for wide acreage entrances start around $2,800 and run $4,500-$7,000 when you add heavy-duty operators, safety photocells, and a keypad. Sliding gate installations with a track and operator typically run $3,500-$6,500 on long driveways because the base prep and rack alignment matter more here than on stable soil.
What moves the price: post depth and backfill, gate width and weight, operator type, and whether we’re running power or going solar. We quote the price before any work starts, and that price is the price. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote, estimates are free.
We Also Serve Cities Near Parkway
We work all around Parkway, including Florin, Fruitridge Pocket, Laguna, and Elk Grove. If you’re on the edge of 95823 or a few miles out, we’re still local. Learn more about our full Gate Installation in Parkway service area or see what our Gate Installation team can do for your property.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Parkway
Parkway sits on expansive Sacramento Valley clay that swells dramatically in wet winters and cracks in 100°F+ summers. This shrink-swell cycle physically lifts shallow footings and tilts posts out of plumb. Elk Grove and Delta properties often sit on different soil profiles, so the movement isn’t as aggressive. The fix in Parkway is deeper concrete footings with compacted gravel backfill so the post doesn’t ride the clay. Call (877) 610-2993 and we’ll check your post plumb for free before quoting anything.
Yes, and on long Parkway driveways solar often beats trenching 300 feet through clay that’s already shifted older posts. We mount the panel clear of the north-facing shade line from mature oaks, size the operator to the actual gate weight, and add safety photocells. On one 1960s ranch property near 95823 with a long dirt driveway, we installed a heavy-duty solar opener on a wide double swing gate because running mains power would have meant trenching through clay that had already moved two older posts. Our tech reset both hinge posts in deeper footings, mounted the operator with photocells, and added a keypad entry so the tenant’s cattle trailer could clear the opening from the cab. Call (877) 610-2993 for an exact quote.
You don’t fix the sag by shimming the hinges or replacing the latch. The hinge posts have heaved, and the gate is dragging because the posts are no longer plumb. We reset each post in a deeper footing below the active clay zone with compacted gravel backfill so water drains and the post stays put. Then we hang the gate square and set the latch with clearance for seasonal movement. Call (877) 610-2993 and we’ll come check the posts.
Automatic gate operators in Sacramento County, including Parkway, must have non-contact safety photocells that reverse the gate when something crosses the path. We install photocells on every automatic gate and test them before we leave. On wide farm gates with livestock, we’ll also set the force limit low enough that a stuck cow or a kid’s arm won’t get pinned. Call (877) 610-2993 and we’ll walk you through the requirements for your specific setup.
We compact the base under the track and align the rack so the gate rolls clean through one full wet-dry cycle. On Parkway’s clay, we often over-excavate, lay a compacted gravel base, and set the track on a concrete pad that can move slightly without transferring force to the rack. Then we align the pinion to the rack with the gate at operating temperature, because Sacramento summer heat expands the steel. If the alignment is off by even a quarter inch, the rack strips within a season. Call (877) 610-2993 and we’ll measure your driveway before quoting.
Get Your Parkway Gate Installation Started
Hal Gatewood has been fixing and installing gates since 2001, and the shop is close enough that you can drive over and look us in the eye. The 90-Day Done Right Promise is stamped in writing on every job. If you want a gate that survives what the clay in Parkway does to it, call us at (877) 610-2993 for a free estimate. We’ll show up, check the post plumb, and give you a number that won’t change at the door.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Parkway since 2001.