Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Florin
A new gate in Florin, CA typically runs $1,800 to $6,400 installed, depending on the gate type, material, and whether the opener and safety edges are included. Most driveway gate installations we quote in the 95828 ZIP take one to two days once materials are on hand, and every price is written and agreed before we start. If you live off Florin Road, in the apartment blocks near Luther Burbank High, or anywhere in the 95828 corridor, you already know this area has older gates that have been ignored for years. We see them every week. Call (877) 610-2993 and we’ll walk the property, measure the opening, and give you a written number you can hold us to.
Why Gatewood Fence & Gate Is Florin’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name sits on every invoice and every job we leave behind in Florin. We are not a franchise, not a dispatch service, and not a call center three states away. A live person answers the phone at (877) 610-2993 at 3 a.m. the same way they do at 3 p.m. Hal or one of his crew members shows up in a uniform, background-checked, and works on the gate in your driveway, not loaded onto a flatbed and hauled across the county.
Florin is specific about what it needs. The housing stock off Florin Road and around the 95828 ZIP is dominated by post-war ranch homes and low-rise apartment complexes from the 1960s through the early 1990s, and the gates on those properties are frequently original: chain-link swing gates, early steel tube-frame designs, and operators that predate modern safety requirements. We know what that means for a new installation: you need posts set right for the soil, hardware sized for the gate, and an opener that meets current UL 325 entrapment standards. That is the work we do every day. Our reputation around Florin is built on fixing what the last crew left behind and standing behind the result with the 90-Day Done Right Promise, in writing, on every single job.
Our Gate Installation Services in Florin
Driveway Gate
A driveway gate in Florin runs $2,800 to $6,400 for a typical single-swing steel or aluminum installation with an opener. On the post-war ranch tracts in the 95828 ZIP, driveway widths vary more than people expect, and a gate that fits one driveway will not necessarily fit the one two doors down. We measure the opening, check for slope and drainage, and quote the exact material and hardware the project needs.
Pedestrian Gate
Pedestrian gates in Florin are frequently the most neglected piece of the fence line, especially on rental properties where nobody reports a sag until the gate drags against the concrete. A properly hung pedestrian gate with new posts and hardware runs $600 to $1,400. We hang them to clear properly through the seasons because a gate that works in May should still work in February.
Sliding Gate
Sliding gates make sense on a lot of Florin parcels where the driveway is short or the setback from Florin Road leaves no room for a swing arc. A cantilever or track sliding gate with an operator runs $3,200 to $7,500. The old rental complexes along Florin Road often have heavy, rusted slide gates that have not rolled freely in years; when the hinge post is gone and the track is buried in silt, we will tell you when replacement is the cheaper move and why.
Swing Gate
Swing gates are the most common install we do in Florin because the original gates on 1960s and 1970s properties were almost always swing gates, and many have now failed at the hinge post. A new swing gate with an operator runs $1,800 to $4,800. We offer Gate Parts & Welding in Florin on site, set new footings when the old ones are cracked, and pair the gate with an opener that has proper entrapment protection, which most of those original installs never had.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Florin
Our Gate Installation team is certified to work on nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Florin we see a lot of DoorKing and Elite operators on the older rental gates, and Viking or Ghost Controls on newer residential installs. We stock common boards, sensors, and hardware for those brands locally, so a repair or replacement does not sit waiting on a parts truck from someone else’s warehouse. If the brand on your gate is obsolete or the board is burned, we will tell you straight what the retrofit costs versus a new operator, and you decide.
Common Gate Installation Problems We See in Florin Homes
Florin’s 95828 ZIP has its own failure pattern. The gates are old, the humidity is seasonal, and the landlords who own many of them are not on site. Here is what we run into:
- Seized chain-link swing gates at rental fourplexes and duplexes. The hinge post rusts through at the footing after years of tule fog, and the gate freezes in place. It only gets reported at turnover, which means the repair is often a full re-hang, not a hardware swap.
- Obsolete operator boards from the 1980s and 1990s. The board has no safety photocell, no current entrapment protection, and parts are not available. Retrofitting is sometimes possible, but on many Florin rentals the honest answer is replacement with a UL 325-compliant opener.
- Gates hung off-plumb because the original posts were set shallow. Decades of clay soil movement and summer heat expansion push the gate out of alignment, and the latch will not catch. We reset posts in concrete to the right depth for Florin’s soil, not the minimum that was used 40 years ago.
- Wood infill panels warped by Sacramento Valley heat. Gates that face full afternoon sun off Florin Road cook every summer, and the wood pulls away from the steel frame. We see it every July. The fix is either a properly gapped infill panel or switching to aluminum or steel.
Pricing for Gate Installation in Florin, CA
A pedestrian gate install in Florin runs $600 to $1,400. A swing driveway gate runs $1,800 to $4,800, and a sliding gate runs $3,200 to $7,500 with an operator. Adding an automatic opener, safety photocells, a keypad, or our Gate Access Control in Florin pushes toward the upper end. What changes the price is the gate’s material, the post footings, and whether the operator is new or existing. Every quote is written, itemized, and agreed before any work starts. No trip charge inside Sacramento County, and seniors and veterans get 10% off permanently. Call (877) 610-2993 and we will measure the opening and put the number in your hand.
Key Takeaways: Gate installs in Florin run about $600 to $7,500 depending on type and opener. Original gates on 1960s-1990s rentals often need full replacement because posts, hinges, and operators are too far gone. The tule fog season corrodes uncoated steel, and summer heat warps infill panels; a gate has to be hung and adjusted for both. Written pricing before work starts, every job backed by the 90-Day Done Right Promise.
We Also Serve Cities Near Florin
We run crews across the south Sacramento corridor, and Florin is right in the middle of our regular route. That means we get to Gate Installation in Florin fast, and we also cover Parkway, Vineyard, Fruitridge Pocket, and Laguna without any trip charge inside the county. If you are just outside the 95828 boundary, call anyway, and we will tell you when we can be there.
Serving Florin, CA - Our Local Coverage Area
We’re based in the Florin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Florin
Most gates in the 95828 ZIP were hung in the 1960s through the early 1990s and have never had a hinge post replaced, an opener board updated, or safety photocells added, so by the time anyone looks at them, the steel is rusted through, the post is off-plumb, and the operator is obsolete. In that condition, patching is more expensive than a new install. The deferred-maintenance pattern is specific to Florin’s rental-heavy housing stock, where a gate often goes unseen until a tenant moves out or code enforcement flags it. Call (877) 610-2993 and we will assess whether yours can be saved or needs to be replaced.
If the operator’s control board is still made and can accept an external entrapment sensor, a retrofit is sometimes possible, but most 1980s and early 1990s boards in Florin were never designed for a photocell input and have no reverse-sensing logic, so the safe and code-compliant answer is replacement with a modern UL 325 opener. Hal will tell you straight if a retrofit makes sense, and he will quote a new LiftMaster or DoorKing operator when it does not. A gate operator without working entrapment protection is a safety hazard, not a working gate.
Tule fog season, roughly November through February, keeps ground-level moisture on steel hinges, frames, and drop-rod hardware for weeks at a time, which means new steel needs a protective coating or powder coat before it goes in, and concrete footings need extra cure time in the cold and damp. We work through fog season every year in Florin, but we adjust the material and the schedule so the gate is not set in mud or painted over rust. Call us and we will pick the right week for your install.
The rental properties along Florin Road and the surrounding 95828 blocks are dominated by original chain-link swing gates and early steel tube-frame designs with hardware sized to specs that are no longer standard. That is why a direct replacement part often does not exist, and why so many of these gates end up needing a full re-hang rather than a hinge swap. We see these every month, and we know how to work with the property managers who handle them. Get a free estimate at (877) 610-2993.
Florin’s repair calls spike in March-April and September-October because that is when tenant turnover and move-out inspections happen, and a property manager discovers for the first time that the gate has been seized, off-plumb, or dead for months. The spring spike catches tule fog rust damage, and the fall spike catches summer heat damage that has thrown latches and hinges out of alignment. If you need Gate Repair - Florin during these busy seasons, we answer live around the clock. We stay busy those months, but we answer live around the clock, and we will give you a window and keep it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Florin and the south Sacramento corridor since 2001.