Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Parkway
Gate parts and welding failures in Parkway usually come down to one thing: the valley-floor clay under your posts. It heaves in wet winters and shrinks through 100°F+ summers, and that movement is what tears hinges, binds rollers, and pulls welds apart. We stock the parts, carry the welding gear in the truck, and we get to Parkway fast. Call (877) 610-2993 and talk to a live person, any hour.
Why Gatewood Fence & Gate Is Parkway’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is still on the door and every invoice. That matters in Parkway, where a lot of the ranch-style homes off Center Parkway and along 65th Street were built in the 1960s and 1970s, and their original gates are at the exact age where cheap fixes stop working. We see the same failures over and over: a hinge post that looks fine from the outside but has rotted below grade, a steel weld that cracked because the post behind it shifted, a slide gate roller binding because the track is moving with the soil.
We answer the phone with a person, not a queue. Dispatch for Parkway runs from our Sacramento office, and the crew that shows up is background-checked and uniformed. When a Parkway homeowner calls about a sagging gate, we don’t just quote a hinge swap. We ask what the post footing looks like, because in 95823 that is usually the actual problem. If you want to check us out before you call, drive by the shop. Hal will tell you the same thing in person he tells you on the phone.
Our Gate Parts & Welding Services in Parkway
Hinge Replacement
A hinge replacement in Parkway is rarely just a hinge replacement. The original steel hinges on those 1960s and 1970s gates have spent 40 to 60 years soaking in tule-fog winters and baking in Sacramento summers. They corrode through, but before we weld on a new hinge bracket we check the post. If the post has moved with the clay, a new hinge just gives the gate a fresh spot to tear out of. We inspect plumb first, then hang the hinge right.
Post Replacement
Post replacement is the defining skill for Parkway gate work. The flat valley-floor clay in this ZIP code expands when saturated and cracks when dry, and it will push a concrete footing out of level within one wet-dry cycle. We pull the old post, dig out the cracked footing, and re-set with deeper, well-drained backfill so the post has room to stay put through the seasonal swing. Then we hang the gate and it stays square.
Rail Repair
Long wooden gates on Parkway acreage properties carry a lot of rail weight, and when the end post heaves, the rails twist and split. We replace or re-weld the rail, but same deal as everything else: if the post is out of plumb, the rail repair doesn’t hold. We straighten the structure first so the gate actually closes true on the latch.
Custom Welding
We weld on site, in your driveway, not in some shop across town. For Parkway gates that means a cracked steel frame on a rural driveway gate gets repaired where it stands, without hauling the gate anywhere. Sometimes the original concrete footing under the hinge post is cracked from years of clay movement anyway, so the weld and the post get handled in the same visit. One trip, done right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Parkway
We’re certified to service nine major gate brands, and for Parkway our most common calls involve FAAC, BFT, and Linear openers on older ranch and acreage gates. Linear motors especially show up on long slide gates where the track has shifted with the clay and the rack teeth start stripping. We keep common repair parts on the truck for these brands, which means less waiting when your gate is stuck half-open and your driveway is blocked. And if you call about a Viking operator on a rural entrance, we handle that too.
Common Gate Parts & Welding Problems We See in Parkway Homes
- Hinge post rot at the footer. Those 40 to 60-year-old ranch-style homes off Center Parkway and along the side streets of 95823 still have original wood posts. Decades of wet winters soaked the base, and the top hinge tears out clean. The panel looks fine; the post is dust below grade.
- Clay heave pushing posts out of square. Parkway sits on expansive valley-floor clay that swells in the wet season and shrinks in the heat. A gate hung perfectly in September can be dragging and binding by March. We check post plumb on every job here.
- Slide gate rollers binding on long tracks. When the ground under a rural Parkway slide gate moves, the track bed flexes and the rollers jam. The motor pushes harder, the rack and pinion teeth strip, and the gate stops mid-travel. Fix the bed first, then the parts.
- Solar opener failures on acreage entrances. Winter tule fog starves solar panels, and a sagging frame misaligns the opener. We see heavy farm gates stuck halfway on rural Parkway driveways, and the fix starts with the structure, not the battery.
Pricing for Gate Parts & Welding in Parkway, CA
Here’s straight money talk for Parkway. A hinge replacement on a standard wood swing gate runs $140 to $260 per hinge, including the bracket and welding. Post replacement, which usually means digging out the old footing, re-setting with better backfill, and re-hanging the gate, runs $380 to $850 depending on post size and how deep the concrete goes. Rail repair on a split or twisted gate rail runs $180 to $420. Custom welding for a cracked steel gate frame runs $150 to $400 per weld point, and we quote that before we strike an arc. Every price is agreed before work starts. Nothing changes at the door. Estimates are free, and there’s no trip charge inside the county. Call (877) 610-2993.
We Also Serve Cities Near Parkway
Our Gate Parts & Welding team regularly runs from Florin up through Fruitridge Pocket and out to Laguna and Elk Grove. If you’re in Parkway or any of the surrounding communities, the same crew, the same 90-Day Done Right Promise, and the same live-person phone answer apply. We’re the Gate Parts & Welding shop that actually comes back if something isn’t right. For everything gate-related across Gate Parts & Welding in Parkway, we’ve got you covered from first call to final weld.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Parkway
Because the post under the hinge is moving with the clay, not the hinge itself. Parkway’s valley-floor soil expands in wet winters and shrinks through 100°F+ summers, which heaves the concrete footing and throws the post out of plumb. A new hinge on a shifted post tears out again within months. The fix is re-setting the post with better backfill first, then hanging the hinge. Call (877) 610-2993 and we’ll check post plumb on the first visit.
Yes, and we do it on site so your gate stays put. We bring the welding gear to the driveway, cut back to clean steel, and weld the frame where it cracked. On Parkway rural entrances, the crack is often tied to the frame sagging as the ground shifts, so we check the post alignment and the opener track before we weld. No hauling the gate to a shop. Call for a free estimate.
Usually not. When the clay under a Parkway slide gate saturates, it swells and flexes the track bed, and the rollers lose contact. The gate jumps the track because the track moved, not because a roller failed. We fix the bed, re-level the track, and then replace any rollers that got chewed up when the gate jumped. Replacing rollers only means another jump next winter. Call (877) 610-2993 for an exact look.
California code requires safety photo-eyes on automatic gates, including long private driveways off Center Parkway and rural acreage entrances in 95823. We install and align them as part of any opener or frame work, and we test them before the gate goes back into service. A gate that closes without working safety edges is dangerous, and we don’t leave one that way. Call us and we’ll check your current setup.
Yearly, before the wet season starts in November, or any time the gate starts dragging, binding, or leaving a mark in the soil. Parkway clay moves every year, and a post can go out of square over one winter. Checking plumb early means a simple adjustment instead of a full post re-set. We’ll check it when we’re out for any other gate work, no extra charge. Call (877) 610-2993 to schedule.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Parkway and surrounding communities since 2001.