Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Richland Hills
Gate installation in North Richland Hills means dealing with ground that moves. The clay here heaves in wet weather and shrinks in drought, which is why a gate that was fine in March can be dragging by August. We plan for that from the first day. If you need a new driveway gate or a replacement swing gate in NRH, call (877) 610-2993 and a live person answers, any hour. We’ll schedule a free measure, give you a written price before any work starts, and the person who shows up will be from Gatewood Fence & Gate, not a subcontractor we’ve never met.
Why Gatewood Fence & Gate Is North Richland Hills’s Preferred Gate Installation Company
Hal Gatewood has been fixing and installing gates since 2001, and his name is on the shop. That matters to people in North Richland Hills who have been burned by a phone quote that doubled at the door. Our published address and license number are available to anyone who wants to check. Call us and you’ll talk to a person who knows the 76180 and 76182 ZIP codes, not a call tree.
We show up in North Richland Hills in clean trucks with background-checked, uniformed crew members. Every job, from a simple pedestrian gate to a full double swing gate, carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No runaround. No fine print. That’s the oldest kind of guarantee there is: the name is on the shop, and the shop is just down the road.
When you call for Gate Installation work, you’ll speak with someone who can tell you within minutes whether we can help and when we can be there. For North Richland Hills residents, we schedule around your day, not ours.
Our Gate Installation Services in North Richland Hills
We install every common type of residential gate in NRH, but the way we do it accounts for what this ground does over time. Here’s what we install most in this area.
Driveway Gate Installation
A driveway gate in North Richland Hills has to stand up to more than just opening and closing. The local Vertisol clay grabs post footings and torques them when the ground dries out, then softens when the fall rains hit. We set posts below the active clay zone, use concrete with rebar, and make sure the gate hangs true before the operator ever gets mounted. A typical ornamental iron driveway gate in NRH runs $2,800 to $6,500 installed, depending on width, infill, and automation.
Swing Gate Installation
Swing gates are the most common style we install in NRH, and they’re also the most exposed to post movement. When a hinge post shifts even a quarter inch, the latch side drops and the operator strains. We build swing gate footings deeper than standard, because North Richland Hills clay doesn’t do standard. A single swing gate typically runs $1,800 to $4,200 installed, including a new operator if needed.
Sliding Gate Installation
Sliding gates are popular in the newer sections of 76182 where driveways are wider and side clearance is tighter. The catch is that slide gates ride on a track, and if the ground under that track heaves, the gate binds and the motor trips. We pour a reinforced track bed and set the operator on a stable pad. A slide gate installation in North Richland Hills usually runs $2,200 to $5,800, depending on length and panel material.
Double Gate Installation
Double driveway gates get tricky because both leaves have to meet in the middle, and both hinge posts have to stay plumb. In NRH, where the clay moves seasonally, that means both posts get the same deep-footing treatment. Double gate installations typically run $4,500 to $9,000 in this market, including automation and safety photocells.
Pedestrian Gate Installation
We also install and replace pedestrian gates alongside fences in 76180 and 76182. These are usually lighter, but they still sag when the post leans. A new pedestrian gate in North Richland Hills runs $450 to $1,400 installed, depending on material and hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service and Install in North Richland Hills
We are certified to service and install nine major gate brands, and we keep parts on hand for the ones North Richland Hills homeowners actually have. FAAC operators are common in the 76182 HOA sections, and we stock their circuit boards and remotes locally. We also install and repair BFT, LiftMaster, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you already have an operator and just need the gate rebuilt around it, we’ll tell you honestly whether it’s worth keeping. Hal fixes what can be fixed; he doesn’t sell parts you don’t need.
Common Gate Installation Problems We See in North Richland Hills Homes
- Posts pushed out of plumb by clay heave. The same ground movement that cracks NRH sidewalks also torques gate posts. Setting a new gate without addressing the footing means the new gate will lean within a season or two.
- Saturated soil softening footings after heavy rains. When the fall and spring storms sit over Tarrant County, the ground goes soft and posts lean. Gates start dragging on the driveway or binding at the latch.
- 1990s-era operators failing in clusters. In the 76182 HOA communities, we regularly find original automatic operators from the same subdivision all giving out within the same year or two. The builders installed them at the same time, and they’ve all hit the end of a 15-to-20-year duty cycle together.
- UV-cracked wiring harnesses and warped wood gates. North Texas summer heat over 100°F bakes wiring, and the insulation cracks. That causes intermittent failures that are hard to diagnose unless you know what to look for. We do.
Pricing for Gate Installation in North Richland Hills, TX
A typical gate installation in North Richland Hills runs between $1,800 and $9,000, with most single driveway gates landing in the $2,500 to $4,500 range. What moves the number: gate width, iron versus wood, single versus double, and whether you’re adding a new operator. Here’s the honest breakdown:
- Pedestrian gate: $450 to $1,400
- Single swing or slide gate, manual: $1,800 to $3,200
- Single swing or slide gate with operator: $2,800 to $5,800
- Double driveway gate with operator: $4,500 to $9,000
- Operator-only replacement on existing gate: $900 to $2,200
Every quote is in writing, before any work begins. The price we quote is the price you pay. That’s not a sales line; it’s how Hal has run this shop since 2001. We also knock $40 off any job over $200, charge no trip fee inside the county, match seniors and veterans with a standing 10% discount, and will give you a free second opinion on any written estimate you’ve received. Call (877) 610-2993 and we’ll set up a free measure.
We Also Serve Cities Near North Richland Hills
We work throughout this part of Tarrant County. If you’re in Richland Hills, Watauga, Hurst, or Colleyville, the same crew and the same 90-Day Done Right Promise apply. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving North Richland Hills locally every week.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Richland Hills
North Richland Hills sits on deeper, more uniform Vertisol clay than many sections of Fort Worth, and that clay expands and contracts dramatically with the region’s drought-flood cycles. When it shrinks in summer drought, post footings lose lateral support and lean. When fall rains saturate the ground, the clay swells and pushes posts upward and sideways. Fort Worth has more varied geology; NRH’s clay is consistent and active. That’s why we dig footings below the active clay zone here, something a standard install from a big-box store won’t do. Call (877) 610-2993 if your posts are leaning; we’ll tell you what’s fixable.
Most automatic gate operators in North Richland Hills have a manual-release handle or key, usually on the side of the motor housing. Pull or turn that release and the gate can be pushed by hand. The important step is disengaging the operator before pushing, or you’ll fight the motor and risk stripping the gear. If you can’t find the release or the gate won’t move after disengaging, the gate itself is likely bound from post movement. Call us and we’ll walk you through it and get someone out. We test every manual-release procedure on every installation we do, so you know how to use it before we leave.
Fifteen to twenty years is the typical service life for an original 1990s-era gate operator in the 76182 HOA communities. We’re now seeing those original operators fail in clusters within the same subdivisions, because the homes were built at the same time and the equipment ages together. Warning signs: the opener hums without moving, the gate stops halfway, the remote works only sometimes, or the operator trips its entrapment protection repeatedly. If your operator is over fifteen years old and doing any of those things, replacement is usually cheaper than repeated repairs. Call (877) 610-2993 for an honest read on whether yours is worth saving.
It’s almost always the hinge post, not the gate itself. Through summer drought, the clay around the post shrinks, the post loses lateral support, and the top of the post leans away from the gate. That drops the latch side. The gate didn’t sag; the post moved. Our crew saw this last spring on a warped double swing gate in the 76182 ZIP where the original LiftMaster operator had seized after years of clay-soil heave torqued the hinge posts out of plumb. We dug new post footings below the active clay zone, set the hinge posts in concrete with rebar, and reinstalled the gate with a new FAAC operator and safety photocells, then tested the manual-release procedure so the homeowner could open the gate by hand during the next power cut. That’s how we fix sag here; fixing the panel without the post means you’ll fix it twice.
Yes. Automatic gate operators in North Richland Hills, like everywhere in Texas, must have entrapment protection, which means photo-eyes or contact edges that stop and reverse the gate if something crosses its path. National UL 325 standards apply, and Tarrant County enforces them. We include safety photocells on every automatic installation and test them before we leave. If your current gate doesn’t have working photo-eyes, that’s a safety problem and a liability problem. We can add them to most existing operators. Call (877) 610-2993 for a free measure and written quote.
Call Gatewood Fence & Gate for Gate Installation in North Richland Hills
If you need a gate installed, replaced, or rebuilt in North Richland Hills, call (877) 610-2993. A live person answers, day or night. We’ll schedule a free measure, give you a written price, and stand behind the work with our 90-Day Done Right Promise. No voicemail. No dispatch queue. No call center three states away. Just the name on the shop, and the shop down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills and surrounding Tarrant County communities.