Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Richland Hills
Gate repair in North Richland Hills usually runs $185 to $480 depending on whether we’re straightening a leaning post or swapping out a dead automatic operator. Most calls we handle same day or next morning, because a gate that won’t close is a gate that stops being a gate and starts being a liability. If your gate is sagging, binding, or dead in the driveway in the 76180 or 76182 ZIP, call (877) 610-2993 and a live person picks up. Hal Gatewood has been fixing gates since 2001, and he will tell you honestly whether the gate can be welded back to square or whether the post underneath has given up.
We work all over North Richland Hills, from the older wood-panel privacy gates along Davis Boulevard through the iron swing gates off Glenview Drive to the HOA entry systems scattered through the newer sections of 76182. The one thing nearly every job here has in common is the ground itself. Tarrant County clay moves. Gates don’t sag in the middle. They sag because the hinge post has been twisted out of plumb by soil that swells in October and cracks wide open in July.
Why Gatewood Fence & Gate Is North Richland Hills’s Preferred Gate Repair Company
We are not a national outfit with a van that says one thing on the side and a bill that says another at the door. Gatewood Fence & Gate is owned by Hal Gatewood, the same person whose name is on the shop and on every invoice. His address is published. His license number is published. You can drive to the shop and look him in the eye, and a few homeowners in North Richland Hills have done exactly that before signing off on a bigger repair.
Every call to (877) 610-2993 is answered by a human being, around the clock, not a voicemail tree. Every job gets the 90-Day Done Right Promise stamped in writing. If we realign a gate and the clay shifts it again inside 90 days, one call brings us back. No runaround. No argument. We also do on-site welding, so the gate stays in your driveway instead of getting hauled off to some service bay across the metro. For a city like North Richland Hills, where half the work is correcting post movement from expansive clay, that on-site welding matters more than it would somewhere with sandier ground.
Our crews know the HOA communities in 76182 well enough to ask the right question before we touch the gate: is this on the architectural committee’s radar, or are we fixing it first and filing the paperwork after? That question saves North Richland Hills homeowners real time and real rework.
Our Gate Repair Services in North Richland Hills
Gate Realignment
Realignment is the most common repair we do in North Richland Hills, and it’s rarely a simple hinge tightening. The Vertisol clay under Tarrant County expands and contracts with every drought-to-rain cycle, pushing hinge posts out of plumb. A 1980s wood gate in 76180 that has been on the same cedar post for 35 years is almost always leaning because the post is leaning, not because the hinges wore out. We cut and repour the footing, reset the post, and then square the gate to the new post. Fix the panel without the post and you’ll fix it twice.
Electric Gate Repair
Electric gate repair in North Richland Hills often means tracing a UV-cracked wiring harness, replacing a control board cooked by summer heat, or diagnosing a photocell that no longer reads. Many of the electric gates around Davis Boulevard and the older neighborhoods were installed when the homes were built, and the wiring is now brittle. We test the full circuit, not just the motor, because a gate that opens on command but won’t reverse on obstruction is a safety problem, not an inconvenience.
Automatic Gate Repair
In the 76182 HOA subdivisions, the original automatic operators from the 1990s are reaching the end of their 15 to 20 year service life all at once. That means an operator that worked yesterday can fail today with a burned-out gear or a stripped drive. We repair what’s repairable and replace what isn’t, with new operators that include current UL 325 entrapment protection. We coordinate with the management company so a shared entry stays functional while we work.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. In North Richland Hills we routinely see posts that were set shallow in clay footing holes 30 years ago. We weld cracked hinge plates on site, sleeve or replace the post when it’s rotten or bent, and set the new post deep enough to hold through the next wet-dry cycle. When a wood privacy gate in 76180 has a hinge screw pulled through the panel, we repair the panel, not just the hinge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We’re certified to service nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing. For North Richland Hills customers, that means we can usually diagnose and repair your existing operator without waiting on a manufacturer-specific service route. We keep common control boards, photocells, remote transmitters, and hinge hardware in stock for these brands. If your 2004 Viking operator on an ornamental iron gate off Rufe Snow Drive is locking up, we can typically get it running the same visit rather than scheduling a two-week parts window.
Common Gate Repair Problems We See in North Richland Hills Homes
- Clay-soil post lean on 1980s privacy gates. The 76180 ZIP has a lot of original wood-panel gates on cedar or treated pine posts. Decades of Tarrant County drought-flood cycles leave the post listing two or three inches, and the gate binds against the latch. Realignment here means resetting the post, not just adjusting the hinges.
- 1990s HOA automatic operator failures in 76182. The ornamental iron entry gates installed during the mid-90s build-out wave are failing in clusters within the same subdivisions. If three neighbors on your street have replaced operators this year, yours is probably next. We see it every season.
- UV-damaged wiring and cracked control boards. North Texas summers over 100°F cook exposed wiring harnesses and shorten control board life. A gate that works fine at 7 a.m. and dies at 3 p.m. is often a thermal failure, not a mechanical one.
- HOA architectural compliance snags. A simple operator replacement can turn into a board review if the new unit changes the look of the gate. We match style, height, and finish to the existing installation so the fix passes architectural standards without a second trip.
Pricing for Gate Repair in North Richland Hills, TX
A hinge and post realignment in North Richland Hills typically runs $220 to $480 depending on whether we’re resetting one post or two. Electric gate diagnosis and minor repair, like a bad photocell or a rebuilt wiring splice, runs $185 to $340. Full automatic operator replacement, including a current UL 325 compliant unit, typically runs $850 to $1,900 installed, with the swing of that range driven by operator brand, gate weight, and whether the existing concrete pad works. If we quote a price on the phone, that’s the price, and we reconfirm it in writing before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near North Richland Hills
In addition to our Gate Repair work across Tarrant County, our crews regularly serve Richland Hills, Watauga, Hurst, and Colleyville. If you’re just outside the North Richland Hills line but still dealing with clay soil and a gate that won’t stay square, call us. You’ll find more about our local coverage at Gate Repair in North Richland Hills.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gate Repair in North Richland Hills
The City of North Richland Hills does not require a permit for most gate operator replacements, but your HOA’s architectural standards almost certainly require board or management company approval before the work happens. In the 76182 communities, the architectural review can be the delaying step, not the permit office. We do the work to whatever the board has approved, and we can help you write the work description for the approval request. Call (877) 610-2993 if you want a second set of eyes on what the HOA is asking for.
We fix the post, not just the gate. In North Richland Hills, a 1980s wood gate on a clay lot is almost always sagging because the hinge post has shifted out of plumb from decades of soil expansion and contraction. We cut and repour the post footing deeper than the original, reset the post, then re-hang the gate to the corrected post. That’s the only repair that holds through the next wet-dry cycle. Call (877) 610-2993 for a free assessment.
That’s a cohort replacement wave, not a coincidence. The 1990s HOA communities in 76182 were built out in a uniform window, so the original automatic operators are all reaching the end of their 15 to 20 year service life within the same few years. When our crew runs multiple calls in the same subdivision in the same season, that’s the reason. We handle the replacement in batches with the management company so resident access stays open through the swap. If your HOA has two or more down gates, call (877) 610-2993 and we’ll walk the site with the board.
For an HOA entry gate in 76182, we typically recommend Linear or DoorKing operators because both meet current UL 325 entrapment protection requirements and have long parts availability in North Texas. The operator needs to be sized to the gate weight and cycle count, which means an entry gate that cycles 150 times a day gets a different unit than one that cycles 15. We spec that on site, and we install the safety photocells and loop detectors the UL standard requires. Call (877) 610-2993 for a written recommendation.
Yes, a skipping chain on a gate operator is usually a worn drive sprocket or a stretched chain, both of which are repairable without replacing the whole operator. We replace the sprocket and re-tension the chain, and if the motor itself still turns clean, you keep your operator and spend a fraction of the cost of a new one. Hal’s repair-first approach is exactly this: swap the worn part, not the whole assembly. Call (877) 610-2993 and we’ll diagnose it on site.
Call Gatewood Fence & Gate for Gate Repair in North Richland Hills
If your gate is sagging, binding, dead, or about to take out a fence line, call (877) 610-2993. A live person answers. Hal Gatewood has been fixing gates since 2001, the shop address is published, and the 90-Day Done Right Promise is in writing on every job. We serve all of North Richland Hills, from 76180 to 76182, and we know the approval process your HOA is going to ask about before we ever touch a hinge. Call today for a free estimate and an honest read on whether that gate needs a repair or a replacement.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills since 2001.