Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Brushy Creek
Gate installation in Brushy Creek runs between $1,900 and $7,500 for most single driveway gates, with double swing gates typically landing between $4,200 and $11,000 depending on size, material, and operator choice. Most of our Brushy Creek jobs are completed within 5 to 10 business days after measurements and HOA paperwork are approved. If you live in the 78717 zip and your current gate is sagging, seizing, or running on an operator that predates modern safety sensors, call us at (877) 610-2993. We will come out, measure everything, and give you a written price before any work starts.
We know Brushy Creek differently than a company that just plugs your address into a GPS. This is not a grid of identical lots to us. It is a string of HOA-governed subdivisions built during a specific window, with specific gate styles, specific soil conditions, and specific architectural review boards that will reject a replacement if the picket profile is off by half an inch. That local knowledge changes how we order steel, how deep we set posts, and which operators we recommend. It is the difference between a gate that passes inspection the first time and one that triggers a costly redo.
Why Gatewood Fence & Gate Is Brushy Creek’s Preferred Gate Installation Company
Hal Gatewood has been running Gatewood Fence & Gate since 2001, and his name is on the shop, on every invoice, and on the 90-Day Done Right Promise that comes with every job in writing. That promise is simple: if it is not done right, one call brings him back. No runaround, no fine print. Homeowners in Brushy Creek tend to appreciate that kind of accountability, especially after dealing with companies that quote one price over the phone and hand over a different invoice at the door. Our price is agreed before work begins, and it does not change unless you change the scope.
Every call to (877) 610-2993 is answered by a live person, 24 hours a day, 7 days a week. Not a voicemail tree, not a chatbot, not a call center three states away. When you call about a gate in Brushy Creek, you talk to someone who knows what a Williamson County HOA architectural committee is and why it matters. We have rebuilt gates in the Highlands at Brushy Creek, worked on homes off Great Oaks Drive, and pulled failed operators out of properties near Brushy Creek Lake Park. We are not passing through. Hal lives in this region, his shop is a short drive away, and if you want to look him in the eye before signing anything, you can drive to the shop and do exactly that.
Background-checked, uniformed techs show up on every job, and they are certified to work on nine major gate brands including LiftMaster, Viking, Ghost Controls, DoorKing, and Elite. We do not farm work out to subcontractors. The person who measures your gate is the same person who hangs it.
Our Gate Installation Services in Brushy Creek
Driveway Gate Installation
The 78717 ZIP is full of brick-and-iron aesthetic packages from the 1995 to 2010 building boom, and a large share of those homes have automated driveway gates that are now 15 to 30 years old. We replace them with properly hung panels, new hinge posts set below the clay heave line, and operators that meet current entrapment-protection standards. A typical single driveway gate install in Brushy Creek runs $2,400 to $5,800 including the operator, safety photocells, and structural steel. Double driveway gates run higher because you are buying two panels, two sets of hinges, and often a more powerful operator.
Pedestrian Gate Installation
Pedestrian side gates in Brushy Creek subdivisions usually run between $700 and $2,200. Most of these are ornamental iron matching the driveway gate, and if you live in a planned community like the ones around O’Connor Drive or Brushy Creek North, your HOA will expect the matching picket profile and cap style. We stock common wrought-iron profiles and can fabricate to match what is already there, so the new gate does not look like an afterthought bolted to the fence line.
Sliding Gate Installation
Sliding gates are common on the wider lots in Brushy Creek where a swing gate would eat too much driveway space. Full slide gate installations in this area typically run $3,800 to $9,500. The bigger cost driver here is not just the gate panel; it is the rack-and-pinion track, the operator, and the safety loops. Legacy slide operators from the late 1990s have control boards that can no longer be sourced, and we frequently retrofit these with new operators that carry modern photocell protection. If your slide gate has been grinding or hesitating, we will tell you honestly whether a motor replacement is enough or whether the frame is too far gone.
Swing Gate Installation
Swing gates are the workhorse of Brushy Creek. The expansive clay under this part of Williamson County shrinks and heaves between drought and rain cycles, which shifts hinge posts out of plumb, throws off gate alignment, and strains operators until they burn out. We set new footings with deeper piers than the original builders used, because we know what the soil does here. Standard single swing gate installs run $2,100 to $5,400. Double swing gates run $4,200 to $11,000. Every swing gate install includes the post work. A gate sags in the hinge post, not in the middle, and that is where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brushy Creek
We install and service operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Brushy Creek homeowners often ask us which brand we would put on our own house, and the honest answer is that it depends on the gate weight, the opening width, and how often the gate cycles. For heavy double swing gates we lean on LiftMaster and DoorKing. For lighter pedestrian gates, Ghost Controls and Viking make solid, straightforward units. We keep common parts and control boards stocked for fast turnaround, which matters when a freeze or a surge takes out an operator in the middle of the week and you need the driveway secured again.
Common Gate Installation Problems We See in Brushy Creek Homes
- Post heave from expansive clay. The soil under 78717 swells when wet and shrinks when dry, and over a few dry summers followed by a wet spring, hinge posts creep out of plumb. The gate starts dragging, the operator strains, and within a season or two the motor burns out. Setting new posts on deeper concrete piers below the heave zone is the only fix that lasts.
- Obsolete control boards on legacy operators. A lot of slide gate operators in Brushy Creek were installed in the early 2000s, and the companies that made those control boards no longer support them. One electrical surge and the board is gone, and there is no exact replacement. We retrofit with new operators that include current safety photocells and loop detectors, rather than patching a dead platform.
- Gates hung before modern entrapment protection existed. If your original gate went in before roughly 2010, it may not have the safety loops and photocells that are standard now. Adding them to old post footings often exposes rusted hinge posts that have to be replaced to pass inspection. We catch this up front rather than after the inspector does.
- HOA mismatch on replacement gates. This one is unique to communities like Brushy Creek. A homeowner orders a new gate, the installers hang it, and then the HOA architectural committee flags it because the picket profile or cap style does not match the original design. Then the whole thing gets redone at double the cost. We ask about the HOA before we order anything.
Pricing for Gate Installation in Brushy Creek, TX
Here is what Brushy Creek homeowners can expect for common gate installation work:
- Pedestrian gate install: $700 to $2,200
- Single driveway swing gate with operator: $2,100 to $5,400
- Double driveway swing gate with operator: $4,200 to $11,000
- Sliding driveway gate with rack-and-pinion track: $3,800 to $9,500
- Operator replacement on existing gate: $950 to $2,800
- Post replacement with deeper concrete piers: $600 to $1,400 per post
Material choice is the biggest variable. Ornamental iron costs more than aluminum, and a custom-fabricated panel to match an existing HOA profile will run more than a stock panel. Site conditions matter too: if we have to pull out a rotted post or rework the electrical feed, the scope grows, and we will tell you before it does. Every quote is written, itemized, and agreed before we start. We also run standing offers that do not require haggling: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Brushy Creek
While this page is about gate installation in Brushy Creek, our crews also work in Anderson Mill, Jollyville, Cedar Park, and Wells Branch. If you are a few minutes outside the 78717 ZIP, call us anyway. The same local knowledge applies across this corner of Williamson County, and you will still get the same live-person answer and the same written Gate Installation price before work begins.
Serving Brushy Creek, TX - Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Brushy Creek
Because Brushy Creek is unincorporated, gate permits route through Williamson County rather than a city office, and many HOA covenants layer additional sign-off requirements on top. You will likely need the HOA architectural committee to review the new gate or operator before installation, especially if the visible hardware changes. We handle the paperwork and know what the committees around Brushy Creek look for. Call (877) 610-2993 and we will check the requirements for your specific subdivision.
The February 2021 freeze seized hydraulic and electromechanical operators across Brushy Creek in large numbers because water intrusion into housings froze, expanded, and cracked internal components. The damage was not always immediate; some units limped along for months before failing completely. If your LiftMaster has been acting up since then, the freeze likely started the failure, and the fix is usually a full operator replacement rather than a board swap. Call us for an honest diagnosis and a written quote.
Not usually. A sagging double swing gate is almost always a hinge-post problem, not a panel problem. The clay under your yard heaved, the post moved out of plumb, and the gate is now pulling against its own hinges. We can often replace the post, set new footings with deeper concrete piers, and rehang the existing panels. That repair typically runs $600 to $1,400 per post, which is far less than a full gate replacement at $4,200 to $11,000. We will tell you straight if the panels themselves are too far gone.
Yes, and we do it regularly. The challenge is that the original post footings were often shallow by today’s standards, and adding loop detectors to old footings sometimes exposes rusted hinge posts that need to come out. That means the retrofit can turn into a post replacement plus the new safety equipment, which runs $900 to $2,200 all-in depending on the post condition. We will show you what we find before we quote the extra work.
It means the HOA architectural committee in your Brushy Creek subdivision can reject a gate that does not match the original picket profile and cap style, even if the new one is technically nicer. You are not locked out of upgrades, but you are locked into the neighborhood’s approved design language. If you want a heavier gauge steel or a better operator, that is usually fine. If you want a completely different aesthetic, the committee may require you to file for a variance first. We have matched original profiles across the Highlands at Brushy Creek and other local subdivisions, and we will work within your HOA’s rules rather than pretending they do not exist.
Call Gatewood Fence & Gate for Gate Installation in Brushy Creek
If your gate is sagging, dragging, or running on borrowed time, call (877) 610-2993. We will send someone to measure, check your soil, review your HOA requirements, and hand you a written price before any work starts. Free estimates, no trip charge inside the county, and Hal Gatewood’s 90-Day Done Right Promise on every job. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Brushy Creek and Williamson County since 2001.