Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Florin
Gate parts and welding in Florin usually means repairing what decades of tule fog and Sacramento Valley heat have done to an original chain-link or steel tube-frame gate. Most jobs on 95828 properties run $180-$650 for hinge, post, and rail repairs, with most done same week. If your gate sags, won’t latch, or the hinge post is rusted through, call (877) 610-2993 and Hal will either fix it himself or send the person who will. We work in Florin every week, so we know the alleys, the shared driveways off Florin Road, and the older apartment blocks where no two gates are quite the same anymore.
Why Gatewood Fence & Gate Is Florin’s Preferred Gate Parts & Welding Company
We have been at this since 2001, and Hal Gatewood’s name is on the shop and on every invoice. Florin customers call us because the gate in a 1970s rental courtyard or a cramped shared driveway rarely takes a bolt-on part from a catalog. Our Gate Parts & Welding crew brings a portable welder and the full rack of hinge stock, roller brackets, and steel tube to the gate, so the repair happens in your driveway, not in our shop. We do not haul gates away unless there is no honest way to fix them on site.
When you call, a live person answers. Not a menu. Not a voicemail. That has been true since the first year Hal opened, and it is still true at 3 a.m. when a sprung gate across a parking entrance will not close. Florin property managers lean on that, because a gate stuck open on a rental block off Gerber Road is a liability that cannot wait until Monday. We answer, we show up in the window we promised, and the price we quote is the price you approve before any work starts.
Our Gate Parts & Welding Services in Florin
Hinge Replacement
Florin’s tule fog season, November through February, holds ground-level moisture against exposed steel hardware. Original hinges on chain-link swing gates rust from the inside out of the barrel, seize, and eventually snap. We cut the old hinge off, grind the post clean, and weld on a new matched set. On a ranch-style home off Stockton Boulevard where the gate is original to a 1972 build, the old hinge size often no longer exists as a stock item, so we fabricate or adapt. The gate ends up swinging true instead of dragging a rut into the driveway.
Post Replacement
A gate sags in the hinge post, not in the middle. In Florin’s shared driveways, that post has often spent 30 or 40 years taking side-load from vehicle traffic while the footing cracked under repeated thermal expansion and tule fog moisture. We cut the post at the base, dig out the failed concrete, set a new post in fresh footing, and weld the hinge plates back in the exact original bolt pattern. This keeps the latch alignment correct without rebuilding the entire gate. We did exactly this on a shared driveway off Florin Road where the right-of-way was barely wide enough for a wheelbarrow; the crew staged on the sidewalk and kept the adjacent slide gate operational the whole time.
Rail Repair
Steel tube-frame gates from the late 1980s and early 1990s are common in Florin’s apartment complexes. The top rail is the first place they fail: moisture gets inside through a cracked weld, rust works its way along the inside of the tube, and the rail sags until the gate drags. We cut out the rotted section and weld in a new rail, then re-hang the frame. Fix the rail without checking the post, and you will fix it twice. That is why we check the post before we quote the rail.
Custom Welding
Odd-sized gate frames in older Florin apartment complexes were often built to fit the opening as poured, not to a standard panel size. A replacement panel from a catalog will not match the post spacing or the mounting plate. We weld new frame sections, fill rotted sections with new steel, and rebuild drop-rod channels and latch brackets so the original gate fits better than it did. Custom welding is how we save gates other outfits want to sell you a whole new one to replace.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Florin
We service and weld parts for Viking, Ghost Controls, and DoorKing gate operators, plus the hardware attached to them. If a Florin rental has a DoorKing arm on one side and a rusted hinge on the other, we fix both in the same visit. We stock common roller brackets, hinge sets, and weldable tube stock on the truck, so we are not measuring your gate, driving back to the shop, and charging you another trip. The free second opinion on any written estimate stands for Florin callers too.
Common Gate Parts & Welding Problems We See in Florin Homes
Florin’s housing stock creates a specific pattern of gate failures. Here is what we see most weeks in the 95828 ZIP:
- Tule fog rust on hinge pins and drop-rod hardware: uncoated steel hardware on gates that were installed in the 1970s was never meant for 50 winters of ground-hugging fog. Hinge posts seize, then the first hard push snaps the barrel.
- Summer heat warping wood infill panels and throwing latches: 100°F-plus days thermally expand the steel frame enough that a latch that worked in April will not strike the plate in August. The same gate needs the latch repositioned or the panel re-shimmed.
- Cracked post footings on shared driveways: decades of delivery trucks, tenant cars, and deferred maintenance crack the concrete around the hinge post, leaving the swing gate off-plumb and the latch hanging two inches off the strike.
- Original hardware sizes that no longer exist as stock parts: the chain-link swing gates on 1960s Florin rentals used hinge sizes and bolt patterns from gate companies that have been sold twice since. Direct replacement is usually impossible; custom welding is the only honest fix.
Pricing for Gate Parts & Welding in Florin, CA
A hinge replacement on a chain-link swing gate in Florin typically runs $180-$340 depending on the number of hinges and whether we are welding new plates or bolting them on. A rusted post replacement with new concrete footing runs $350-$650. Rail repair on a steel tube-frame gate runs $250-$500. Custom welding jobs start around $150 for a small bracket or latch repair and go up from there based on the steel and time involved. Every price is quoted and agreed before any work starts. You will not get a bigger number at the door. Seniors and veterans get a permanent 10% discount, and any repair over $200 takes $40 off right now. Call (877) 610-2993 for a free estimate on your gate.
We Also Serve Cities Near Florin
If you are just outside Florin, we work the surrounding streets too: Florin, Parkway, Vineyard, Fruitridge Pocket, and Laguna are all in our service area, and the no-trip-charge policy inside the county applies. Same crew, same 90-Day Done Right Promise, same published address and license you can verify before you let anyone touch your gate.
Serving Florin, CA - Our Local Coverage Area
We’re based in the Florin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Florin
Yes, in most cases the gate itself is still sound and only the hinge post and hardware are rusted. We cut the post at the base, set a new one in fresh concrete, and weld the hinge plates back in the original bolt pattern so the gate hangs exactly where it did. We do this regularly on Florin chain-link gates that are original to the 1960s and 1970s. If the frame itself is rotted through, we will tell you straight and show you the section before quoting a rebuild. Call (877) 610-2993 and we will come look at the post, not sell you a gate you do not need.
We repair the slide gate in place because swinging it is not an option when the driveway is narrow and the neighbor’s fence is three feet away. The usual job is replacing rusted rollers, welding new guides, and resetting the track if it has settled. On a shared driveway off Florin Road we replaced a seized hinge post and rebuilt a sagging chain-link swing gate while keeping the adjacent live slide gate working the whole time using a portable welder and staging materials on the sidewalk. The original steel tube frame was welded back to plumb and new hinges matched the old bolt pattern. Call (877) 610-2993 for a free estimate on a slide gate repair.
Gate operators in Florin rental properties must have functioning entrapment protection, which means properly adjusted reversing edges, photo eyes, or both, installed and tested. When we service a DoorKing or Ghost Controls operator on a Florin apartment gate, we test the safety edges and photo eyes as part of the job. If the operator lacks required entrapment protection or the edges are cracked and dead, we flag it and quote the repair before we leave. A gate that closes on its own without reversing on contact is a safety violation and a liability. Call (877) 610-2993 and we will inspect yours with the price quoted before any work starts.
Yes. Most Florin steel tube-frame gates weigh a few hundred pounds, and we can jack the gate up on cribbing, pull the old rollers, and weld on new brackets without ever lifting it off the track. This keeps the gate operational during the repair, which matters when it is the only vehicle entrance to a rental courtyard. We stock common roller sizes and weldable steel on the truck, so this is often a same-visit repair. Call (877) 610-2993 for a quote.
Yes. Custom welding is the core of half the jobs we do in Florin’s 1960s-to-1990s rental stock, where gate frames were built to fit the poured opening and no longer match any catalog dimension. We weld new frame sections in place, rebuild rusted channels and drop-rod guides, and repair latch brackets so the original gate works again. Every custom welding job carries the 90-Day Done Right Promise in writing. Call (877) 610-2993 and we will measure and quote it free.
If your gate is sagging, seized, or rusted out somewhere in Florin, don’t guess at it. Call (877) 610-2993. Hal or one of his crew will show up, look you in the eye, and give you a price before any work starts. You will see the same face at the hardware store later, and that is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Florin since 2001.