Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across East Point
Gate installation in East Point, GA typically runs $2,800 to $9,500 for a residential driveway gate, depending on the span, the operator, and what has to happen with the posts. We’re Gatewood Fence & Gate, and we’ve been doing this work since 2001. Hal Gatewood owns the shop, his name is on the invoice, and when you call (877) 610-2993, a live person answers. No voicemail, no call center, no runaround. If you’re off Camp Creek Parkway or in the older bungalow blocks near Virginia Avenue, we know what your gate is up against: red clay, humidity, and if you’re near the airport corridor, traffic volume that eats residential equipment alive. We spec gates for what East Point actually throws at them.
Why Gatewood Fence & Gate Is East Point’s Preferred Gate Installation Company
We’ve pulled enough gate posts out of East Point’s red clay to know the difference between a footing that will hold and one that will heave by next summer. That’s not a guess; it’s a pattern. Homes built in the 1940s through 1970s dominate the residential core, and those original wrought iron and chain-link gates are sitting on concrete-set posts that have shifted for decades. Hal and his crew start at the hinge post, not the panel, because a gate sags in the post, not in the middle. And if the post has to come out and get re-plumbed, we say so before we touch the hardware. East Point customers call us because we tell them what’s actually failing, then fix it in the driveway. We weld on site. We don’t haul a gate off to some shop an hour away and bring it back looking different than the neighbor’s. When something isn’t right, the 90-Day Done Right Promise brings Hal back. In writing, on every job, plain as the address on the shop.
Calls reach a live person 24 hours a day, seven days a week, not a queue. That matters when a gate motor dies on a Friday evening and a rental car lot on Camp Creek Parkway can’t close. For East Point specifically, response is fast because our scheduling comes out of the Atlanta office, but the crew serves East Point locally. You’ll see the same person who measured the gate re-checking the final swing arc before we call it done.
Our Gate Installation Services in East Point
Every install gets the same starting point: a look at the posts, the soil, the power situation, and how many cycles that gate will actually run. Here’s what we install most often around East Point.
Driveway Gate
A driveway gate on a mid-century ranch off East Point’s residential streets usually wants a steel frame with either picket infill or a match to the existing ironwork style common in the area. The bigger question is the operator. Driveway gates that sit unused for a week need one thing; driveway gates opening five times a day for delivery drivers need something else entirely. We don’t put a residential operator on a commercial workload, and we’ll tell you plainly when your gate falls in that gray area.
Pedestrian Gate
Pedestrian gates in East Point’s older blocks often tie into existing fencing or a driveway gate and need to swing true without dragging on a walkway. The red clay heave that torments the big posts hits these small ones too. We set pedestrian gate posts below the shrink-swell zone whenever the site allows, because resetting a walk gate every two years is not a relationship anyone wants.
Sliding Gate
Sliding gates are the workhorse on East Point’s wider driveways, especially along the commercial edges near Camp Creek Parkway. If there isn’t room to swing a gate, or if the apron is steep, a slide is often the right call. We install heavy-duty cantilever and track-style slide gates, and we load them with operators that can handle the duty cycle. The rack and pinion units we favor for wide farm gates don’t strain the way a belt-drive residential opener does.
Swing Gate
Swing gates look right on a 1950s brick bungalow, but East Point’s soil wants them built with over-engineered hinge posts and a concrete footing deep enough to resist the swell. We install single and double swing gates, including heavy ornamental iron. The trick is the hinge alignment at the post, not the center of the panel. Fix the panel without the post and you’ll fix it twice.
Security Gate
Security gates are more than an opening in a fence line. They’re a perimeter decision, and around East Point’s commercial properties and rental car operations, they need to work every single time. We build and install security gates with reinforced frames, keypad entry, loop detectors, and commercial operators that can log hundreds of actuations a day without burning out a control board. If a gate is supposed to stop a vehicle, we build it like that’s true.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in East Point
We’re certified to service nine major gate brands, and around East Point we see a lot of LiftMaster, FAAC, and Linear on the commercial side, with Viking and BFT showing up on residential installs. We keep common parts local so East Point customers aren’t waiting on a distributor three states away. When a FAAC control board fails on a shuttle lot gate, the lot needs it fixed now, not in a week. Hal knows which boards fail and keeps them ready.
Common Gate Installation Problems We See in East Point Homes
- Post footings heaving from red clay expansion: East Point’s clay swells in summer rains and contracts in dry spells. Swing gates bind at the hinge post, and resetting the gate doesn’t fix the footing. We excavate, pour deeper, and re-anchor before the hardware goes back on.
- Undersized residential operators on commercial-duty gates: A driveway gate running shuttle vans and delivery trucks 300-plus times a day will cook a residential opener in months. We spec operators by cycle count, not by the gate’s appearance.
- Solar systems sized for occasional use: Long rural driveways off side roads in the 30344 zip often can’t justify running mains power, so solar is the answer. But a panel and battery bank sized for “a few opens a day” goes dead when the gate runs ten times daily. We size solar for real usage.
- Rust and corrosion from the humid subtropical climate: East Point’s humidity works on iron all year. Gate frames need proper prep and coating before installation, not a paint job that peels off in two seasons. We use galvanized hardware and marine-grade coatings where the exposure calls for it.
Pricing for Gate Installation in East Point, GA
Here’s what East Point property owners can expect to pay, installed:
- Pedestrian gate: $800 - $2,200, depending on width, material, and whether the post needs resetting.
- Single driveway swing gate: $2,800 - $5,500, with the operator included on most installs.
- Double swing gate (wide driveway): $4,500 - $9,000, driven mostly by post work and the operator’s duty rating.
- Heavy-duty sliding gate (commercial or wide farm entrance): $5,500 - $14,000, depending on span, track system, and access controls.
- Solar-powered gate system: Add $1,200 - $3,000 for panels, battery bank, and charge controller, sized for actual daily cycles.
The quote is written and agreed before any work starts. That’s not a sales tactic; it’s how Hal has done it since 2001. You get a number, you approve it, we do the work. Senior and veterans get a permanent 10% discount, and there’s no trip charge inside the county. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near East Point
Our crew works Gate Installation across East Point and the surrounding area. If you’re in Hapeville, College Park, Atlanta, or Gresham Park, the same crew, same pricing, and same 90-Day Done Right Promise apply. The shop is down the road, and that’s the oldest accountability there is.
Serving East Point, GA - Our Local Coverage Area
We’re based in the East Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in East Point
East Point’s soil is expansive red clay that swells when wet and shrinks when dry, and the shrink-swell zone runs deeper than the sandy loam you’ll find in some neighboring counties. A footing that stops at 24 inches will heave. We typically go 30 to 36 inches, or deeper for heavy gates, and use concrete with rebar so the post doesn’t lean when the clay moves. Call (877) 610-2993 and we’ll look at your specific site before you spend a dollar.
No. A residential operator is rated for maybe 20 to 30 cycles a day. A gate on Camp Creek Parkway serving shuttle vans can log 300-plus cycles every single day. It will overheat, strip gears, and burn the control board in months. We install LiftMaster or FAAC commercial operators with reinforced hardware for that duty cycle, and we’ll show you the difference in the spec sheet. The free estimate covers it.
Yes, but only if it’s sized for real usage. We installed a solar-powered slide gate operator on a long rural driveway off a side road in East Point’s 30344 zip where running mains power was impractical. We set post footings deep in the red clay, mounted a high-cycle FAAC unit with rack and pinion drive, and wired in a keypad entry and loop detector so it opens as vehicles approach. The system works because the battery bank and panel array match the gate’s actual daily cycles. Undersized solar quits. We size it properly from the start. Call us for a straight answer on your driveway.
A heavy-duty slide gate, usually cantilever style, with a commercial rack and pinion operator. Wide farm entrances don’t have room for a big swing arc, and the slide doesn’t fight the clay the way a double swing does. We build these with reinforced steel frames and operators that handle constant use. A farm entrance off the Camp Creek corridor is exactly the job where residential equipment fails early. Get a written estimate from Hal before you buy anything.
Start with the hinge posts, not the panels. East Point’s clay heaves posts out of alignment, and once one hinge post leans, the gate sags and drags. We set both posts in deep footings below the shrink-swell zone, tie them together when the gate is wide, and use adjustable hinges so the gate can be fine-tuned over time. The panel gets checked only after the posts are true. That’s the order that works here.
Call Gatewood Fence & Gate for Gate Installation in East Point
You can drive to the shop and look Hal in the eye, or call (877) 610-2993 and he’ll pick up. A live person answers, any hour, any day. You’ll get a free estimate, a written quote before work starts, and a 90-Day Done Right Promise in writing. If it’s not done right, one call brings him back. No fine print, no dispatch queue, no company that forgot your name three years ago. We’ve been at this since 2001, and East Point gates are what we know. Call today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving East Point and surrounding Georgia communities since 2001.