Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across East Point
Gate repair in East Point, GA typically runs $185 to $620 for most residential jobs, with hinge and post repair on the lower end and full electric operator replacement on the higher end. We’re Hal Gatewood’s crew, and we’ve been fixing gates in this part of Fulton County long enough to know the red clay, the bungalows, and the airport traffic patterns. If your gate won’t open, sags, whines, or stopped responding to the remote, call us at (877) 610-2993 and a live person answers, same as it’s been since 2001.
You won’t get a phone tree. You’ll get a straight answer about what’s wrong, what it costs to fix, and when we’ll be there. The name’s on the shop, and the shop is down the road. That’s the oldest accountability there is.
Why Gatewood Fence & Gate Is East Point’s Preferred Gate Repair Company
We’re the repair-first shop, not the rip-it-out-and-sell-you-a-new-one shop. Hal built this business in 2001 on a simple idea: a gate sags in the hinge post, not in the middle, and that’s where we start. Most of the gates we fix in East Point don’t need replacing. They need re-plumbing, re-welding, or a new control board. When we tell you a gate is done, you can believe it, because we’d rather fix a $40 hinge than sell a $4,000 gate you didn’t need.
Every job carries our 90-Day Done Right Promise, stamped in writing. If it isn’t done right, we come back and make it right. One call brings Hal back. No runaround. On a repair over $200, take $40 off. Seniors and veterans always get 10% off. And there’s no trip charge anywhere inside Fulton County, including every East Point ZIP. We’re also happy to give a free second opinion on any written estimate another company gave you. Bring it. We’ll tell you straight if the price is fair, or if they’re selling you work you don’t need.
East Point customers see the same person who answered the phone show up at the door. Background-checked, uniformed, and driving a truck with Hal Gatewood’s name on it. Not a subcontracted crew, not a rotating cast. The person fixing your gate has been doing this for over two decades.
Our Gate Repair Services in East Point
Electric Gate Repair
Electric gate repair in East Point runs $220 to $680 depending on whether we’re replacing a control board, rewiring a photo-eye, or rebuilding an operator. We service Gate Repair calls on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. On a bungalow off Virginia Avenue, we pulled a 1990s-era FAAC swing operator whose control board had finally given out after decades of daily use. Rather than sell a new setup, we replaced the obsolete board with a modern UL 325-compliant unit, added safety photocells, and got the gate running smooth again. That’s repair-first.
Automatic Gate Repair
Automatic gate repair in East Point often comes down to two things: a worn gearbox or a misaligned track. On a slide gate that grinds or stalls mid-travel, we check the rack and pinion teeth, the rollers, and the limit switches before touching the motor. Many automatic gate problems in this city trace back to posts that have shifted in the red clay, throwing the whole system out of square. We fix the footing, then the hardware. In that order.
Hinge & Post Repair
Hinge and post repair is the bread-and-butter of our East Point work. Original wrought iron driveway gates on 1940s through 1970s bungalows were set in concrete footings that have spent fifty-plus years fighting Georgia’s expansive red clay. The soil swells in summer rains, contracts in dry spells, and cyclically heaves the posts out of alignment. We dig down, replumb the post, set it in fresh concrete, and weld or replace the hinge. Fix the panel without the post and you’ll fix it twice. Most East Point hinge and post repairs run $185 to $420 per post.
Gate Realignment
Gate realignment in East Point runs $160 to $350 for a standard residential swing or slide gate. If your gate drags on the ground, won’t latch, or scrapes the pillar, the post has likely moved. We use a plumb bob and level, not a guess. After repositioning, we check the entire travel path and adjust the operator limits so the motor isn’t fighting the frame. A gate that closes on its own has a failing hinge or a shifted post, and we’ll show you exactly where it’s failing before we touch a wrench.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in East Point
We’re certified to service nine major gate brands, and in East Point we see an outsized share of FAAC, BFT, and Linear units, especially on the older residential gates and the commercial corridor. Those three names show up constantly. We stock common control boards, gearboxes, remote transmitters, and photo-eye parts for these brands, which means we often finish a repair in one trip instead of waiting a week on a shipped part. If your operator is a Viking or LiftMaster on a Camp Creek Parkway lot, we handle those daily too.
Common Gate Repair Problems We See in East Point Homes
- Heaved posts in red clay: East Point’s expansive soil swells and contracts with every rain cycle. Posts set decades ago shift gradually until the gate binds, drags, or won’t latch. We fix the footing, not just the symptom.
- Rust and corrosion on iron gates: The humid subtropical climate means surface rust forms year-round, especially on gate bottoms and welded joints that collect water. We grind, treat, and weld on site so the frame stays sound.
- Obsolete operators without modern safety sensors: Gates installed before current UL 325 standards often lack working photo-eyes or edge sensors. That’s a real safety issue, not a cosmetic one. We retrofit modern entrapment protection wherever we service an older operator.
- Stripped rack and pinion teeth on slide gates: On gates that have run misaligned for months, the rack teeth wear down and the motor grinds. We realign the track first, then replace the rack section so the new one doesn’t strip the same way.
Pricing for Gate Repair in East Point, GA
Here’s what East Point homeowners can expect. A hinge repair on a single swing gate runs $185 to $320. Re-plumbing a shifted post runs $300 to $420. Replacing a residential control board runs $250 to $450 with parts. A full operator replacement on a standard residential gate runs $500 to $900 including labor and equipment. Commercial slide gate work on airport-adjacent lots typically runs $750 to $1,800 depending on duty cycle and operator class.
Every quote is a firm price, agreed in writing before we start. You sign the number, we hit the number. No surprise at the door. Call (877) 610-2993 for a free estimate, or bring us a written estimate from another company and we’ll give you a free second opinion. Estimate’s free, either way.
We Also Serve Cities Near East Point
We work throughout East Point and the surrounding Fulton County communities. That includes Hapeville, College Park, Gresham Park, and the south Atlanta neighborhoods that border East Point. If your gate is misbehaving and you’re not sure whether you’re in our service area, call and ask. The answer’s usually yes.
Serving East Point, GA - Our Local Coverage Area
We’re based in the East Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in East Point
Your posts keep shifting because they’re set in expansive Georgia red clay, which swells dramatically during East Point’s wet summers and contracts in dry spells. Over decades, this cycle heaves concrete footings out of plumb. For a swing gate, a shifted post means the gate binds at the hinge, drags, or refuses to latch. You can’t fix the hardware and expect it to hold until you address the post footing. That means digging the post out, re-plumbing it, setting fresh concrete (or a deeper footing), and only then re-hanging and adjusting the gate. This is the single most common repair we do in East Point’s older residential blocks. Call (877) 610-2993 and we’ll come tell you straight what your posts need.
A commercial slide gate running 300-plus cycles a day for shuttle vans and delivery trucks will typically need operator replacement every 3 to 6 years, depending on how well it’s maintained. That’s far shorter than a residential gate, which might run 10 to 20 cycles a day. The gearboxes and control boards in high-cycle LiftMaster and FAAC operators simply burn through their rated service life. If your gate is on Camp Creek Parkway or Virginia Avenue near the airport, you’re in the highest-demand duty cycle in the metro. For real numbers and a maintenance schedule, call (877) 610-2993. Free estimate, no obligation.
In most cases, you can repair just the hinge if the post itself is still sound. We cut off the rusted hinge, grind the area clean, and weld on a new hinge plate on site. But if the post has rusted through at the base, or if it’s shifted in the red clay, replacing the post is the honest answer. A rusted-through post will fail again, and a shifted one will keep dragging. We’ll show you the condition of the post before we do anything. Typical hinge-only repair runs $185 to $280. Post replacement runs $300 to $420. Call (877) 610-2993 and we’ll give you a firm price before any work starts.
Yes. Every automatic gate installed in East Point must comply with current UL 325 entrapment protection standards, which require working photo-eyes, edge sensors, or equivalent safety devices. Older gates, especially pre-2000 installations, often lack these entirely or the sensors have failed. That’s not a code technicality. It’s the difference between a gate that stops when a kid or a delivery person is in the path and one that doesn’t. We retrofit photo-eyes and edge sensors onto older operators regularly. If your gate is missing them, don’t put off the fix. Call (877) 610-2993 and we’ll get it safe.
In most East Point homes, yes, you can retrofit. If the gate frame and posts are structurally sound, we can add a keypad entry, a solar-charged operator, and modern safety sensors without replacing the gate itself. The key question is post condition. If the posts have shifted or rusted through, we address those first. A retrofit with a solar opener and keypad typically runs $800 to $1,400 depending on gate size and hardware. The only time we recommend full replacement is when the gate frame itself is rusted beyond repair or the operator mount is too deteriorated. For an honest assessment, call (877) 610-2993. The estimate is free.
If your gate is down and you need a human being who knows East Point, call now. We answer live, 24/7. And we stand behind every job with the 90-Day Done Right Promise, in writing. That’s how it’s been since 2001, and that’s how it stays.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving East Point and surrounding Fulton County communities.