Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Eagle Mountain
Gate access control in Eagle Mountain means more than a keypad bolted to a post. Around this lake, it’s a custom ornamental swing gate on a half-acre lot, a video intercom tied to a long driveway, a slide gate that has to hold up to sustained wind off the water. We get that because we work here every week. Gatewood Fence & Gate has been locally owned and owner-operated since 2001, and our Gate Access Control crew knows the 76179 ZIP, the lake-access roads, and the clay soil under them. If you’re in Eagle Mountain and a keypad, card reader, or phone entry system has quit, call (877) 610-2993 and you’ll get a live person, not a voicemail.
Why Gatewood Fence & Gate Is Eagle Mountain’s Preferred Gate Access Control Company
Hal Gatewood’s name is on the shop. That’s not a slogan. It means the person who answers your call can be the same person who shows up with a meter, a welder, and a truck stocked with brand parts. We answer the phone around the clock, seven days a week, because a gate that won’t close isn’t something you wait on until Monday. When someone in Eagle Mountain calls with a dead opener or a keypad that stopped reading, they aren’t handed to a call center. They talk to us.
Eagle Mountain homeowners tend to do their homework. They ask who’s actually coming out, whether the price quoted on the phone is the price on the invoice, and whether the crew will find a reason to replace instead of repair. Fair questions. We quote before work starts, we write the 90-Day Done Right Promise on every job, and we fix what can be fixed. On-site welding means your gate stays in your driveway. We don’t haul it to a shop and tell you to wait.
We know the area well enough to have been on coves off Peden Road, up on the rural fringe where ranch-style pipe gates still guard old agricultural parcels, and through the mid-2000s custom home streets where ornamental iron swing gates are standard equipment. That local knowledge changes the repair. A gate post out of plumb in this clay isn’t the same as one out of plumb in Saginaw. Here, it’s usually the dirt, not just the hinge.
Our Gate Access Control Services in Eagle Mountain
Keypad Entry
A keypad that stops reading codes in Eagle Mountain usually has two causes. The board or membrane finally gave up under UV, or the strike plate alignment shifted because the post moved in clay heave. We check both. We service and install standalone keypads and wired keypads tied to Viking, DoorKing, and Elite operators, and we set them up so you aren’t resetting codes every three weeks. We also match access codes to different users when you need it, which matters when a housekeeper, pool contractor, or lake-service vendor needs temporary access.
Video Intercom
Long driveways on lakefront and cove-side lots make a video intercom genuinely useful, not a gadget. You want to see who pulled up before you open the gate from the house, especially on properties where the gate sits 200 feet from the front door. We install and repair video intercom systems that tie into existing gate operators, including systems with mobile app integration so you see and talk to whoever is at the gate from your phone. Wiring on these systems takes a beating from North Texas heat and the occasional ice event. We service them with that in mind.
Phone Entry
Phone entry systems let a driver call a number from the gate and have you buzz them through from your cell or house phone. On Eagle Mountain properties with gated driveways and regular deliveries, this beats handing out keypad codes. North Texas ice storms freeze solenoid locks and snap actuator arms, but they also test phone entry wiring and cellular modules. We install and repair phone entry systems built to handle real weather, and we test them hard before we leave.
Card Reader
Card readers show up on more Eagle Mountain properties than people expect, especially on larger lots where the owners ran a card system for contractors, family, or a small business operating from the house. Compact proximity readers and heavier commercial-grade readers both need clean power, stable mounting, and a post that hasn’t wandered. When a card reader fails intermittently on a lake-exposed gate, we check the reader first, then the wiring, then the post. Usually it’s one of the three.
Smart Access
Smart access means controlling your gate from your phone, from anywhere, with real-time open/close alerts. Around Eagle Mountain, it’s popular with homeowners who split time between the lake house and another property. We integrate smart access modules with existing gate operators, including Ghost Controls and DoorKing systems already in the ground. The goal is simple: reliable control without replacing a gate that’s still got years left in it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Eagle Mountain
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers nearly every operator, keypad, and access system installed on Eagle Mountain gates over the last two decades. Around here you’ll see a lot of FAAC and DoorKing on custom ornamental swing gates from the mid-2000s build-out, and plenty of Viking and Ghost Controls on newer and retrofitted systems. We stock common boards, remotes, safety edges, and photocells so a same-week repair doesn’t become a two-week parts wait. Where a brand-specific part has to be ordered, we tell you that before we quote.
Common Gate Access Control Problems We See in Eagle Mountain Homes
- Keypads that work in winter and fail every May. The post your keypad is mounted to shifts with springtime moisture swings in the expansive clay. When the strike plate alignment changes, the signal circuit that confirms a closed gate reads wrong, and the keypad ignores commands. The fix is post re-plumb first, keypad replacement second.
- Video intercom and card readers going dead after heavy rain. Clay heave cracks conduit seals along long driveway runs in the 76179 ZIP. Water finds the underground operator junction box, and intermittent failures start. We dig to the box, dry it out, re-seal, and test the run.
- Slide gates that shudder and stop mid-travel on hot afternoons. Lake-exposed gate panels catch sustained wind, which pulls screws from rack and pinion mounts. Thermal expansion of the steel rail in 100°F heat compounds the misalignment. It’s usually a mount-and-rail problem, not a motor problem.
- Old photo-eyes that false-trigger or quit after ice. Ranch-style pipe gates on the rural fringe often still have aging photo-eye safety systems. Ice shears connections and sunlight bakes housings until they crack. A failed photo-eye is a safety issue and a reliability issue, and we replace them before they strand somebody outside the gate.
Pricing for Gate Access Control in Eagle Mountain, TX
Post re-plumb and realignment, which is the single most common repair we do in this ZIP, runs $250-$450 per post when the footing is sound and the weld work is straightforward. A full post reset with new concrete on a caliche-topped pad pushes higher, and we’ll tell you that before we dig. Every price is quoted and agreed before any work starts. That’s not a courtesy, it’s how Hal has done it since 2001. Call (877) 610-2993 for a free estimate, and remember the standing offers: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Eagle Mountain
If you’re in Eagle Mountain, you’re close to a few other communities where the same crew runs calls. We regularly serve Saginaw, Azle, Briar, and River Oaks for gate access control work. Same owner, same truck, same 90-Day Done Right Promise. Call (877) 610-2993 and tell us where you are, and we’ll let you know when we can be there.
Serving Eagle Mountain, TX - Our Local Coverage Area
We’re based in the Eagle Mountain area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Eagle Mountain
Why does my Eagle Mountain gate keypad work fine in winter but fail every May?
Because May is when post-seasonal moisture in the expansive black clay hits its peak and the gate post shifts just enough to throw the strike plate out of alignment. The keypad circuit that verifies the gate closed loses its signal, and the keypad goes dumb. The fix is re-plumbing the post first, then testing the keypad. Call (877) 610-2993 and we’ll set it straight.
Can I add a video intercom to my existing ornamental swing gate on Eagle Mountain Lake?
Yes, in most cases. The existing operator, post condition, and wiring distance from the gate to the house are what determine the scope. We’ve added video intercoms to plenty of custom ornamental swing gates around Eagle Mountain without replacing the operator. We’ll come out, look at what you have, and give you a written number before any work starts.
How do I protect my gate’s phone entry system from North Texas ice storms?
The two things that fail in ice are solenoid locks and exposed wiring connections. Ensuring the lock has a sealed housing and that connection points are tight and protected will prevent most freeze-related failures. If an ice event does take out your phone entry, we answer around the clock and can often have it working the same day.
My slide gate shudders and stops halfway on hot afternoons. Is that a motor problem?
Usually not. In Eagle Mountain, it’s most often wind loading off the lake pulling screws from the rack and pinion mounts, compounded by thermal expansion of the steel rail in the afternoon heat. The motor gets blamed for a mechanical problem. We check the mounts, re-tighten or re-drill as needed, and re-track the gate before touching the operator.
We just bought a home with a ranch-style pipe gate and an old photo-eye. Do we really need a new safety system?
Yes. The photo-eye is the device that keeps the gate from closing on a person, a vehicle, or a child. If it’s old, false-triggering, or unreliable, it isn’t a convenience issue, it’s a safety failure waiting. Replacing a photo-eye is an inexpensive repair compared to what a gate injury costs. Hal will tell you the same thing if you call (877) 610-2993.
Call Gatewood Fence & Gate in Eagle Mountain, TX
If your gate access control system is acting up, call (877) 610-2993. You’ll get a live person, a straight answer, and a price that won’t change at the door. Hal Gatewood has been at this since 2001, and the shop is local, owner-operated, and backed by the 90-Day Done Right Promise in writing. Whether you’re on a lake-access road, a cove off Peden Road, or out on the rural fringe with a ranch gate, we’ll come out, look you in the eye, and fix it right the first time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Eagle Mountain since 2001.