Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Dania Beach
Gate installation in Dania Beach runs $2,800 to $7,500 for a standard automated driveway gate, with pedestrian gates starting around $900 and full custom double swing gates on canal-front homes reaching $12,000 or more. We quote it upfront, in writing, before any work starts. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood’s name is on every invoice. Call (877) 610-2993 and a live person answers, day or night.
Dania Beach sits between the Atlantic and the Intracoastal Waterway, which means salt air is working on your gate every single day, whether you notice it or not. We know the difference between a gate that fails in two years out here and one that holds for twenty. This page explains what that difference costs and how to get it right the first time.
Key Takeaways:
- Typical automated driveway gate installation in Dania Beach: $2,800-$7,500
- Marine-grade hardware is not an upgrade here. It’s the floor.
- Every job carries a written 90-Day Done Right Promise.
- Free estimates, no trip charge inside the county. Call (877) 610-2993.
Why Gatewood Fence & Gate Is Dania Beach’s Preferred Gate Installation Company
We’re the local outfit that gets called after someone else’s gate failed early, or after a national company quoted one price and invoiced another. Dania Beach homeowners tend to check names and addresses before they hire. Hal Gatewood’s name is on the shop, his address is published, and his license number is there for anyone to look up. That’s the accountability model around here, and it’s the only one we work under.
When you call Gatewood Fence & Gate from Dania Beach, you’re not routed to a call center three states away. You get a live person, 24 hours a day, who knows the area and can schedule around the bridges, the canal-side access issues, and the older post-and-panel layouts this city is full of. Our crew serves Dania Beach directly and has replaced and retrofitted gates everywhere from Melaleuca Gardens to the streets off Federal Highway near the old Frost Park corridor.
We carry the parts Dania Beach jobs actually need: marine-grade hinges, powder-coated aluminum frames, epoxy-coated rebar for footings, and sealed control boards. That matters more than most people realize until their second gate fails and they call us.
Our Gate Installation Services in Dania Beach
Here’s what we install and retrofit in Dania Beach most often. Each option starts with a free site visit, a written price, and no work until you approve the number.
Driveway Gate
A driveway gate on a Dania Beach lot is usually not just a gate. It’s a salt-exposure problem, a wind-load problem, and often an old concrete post problem, all at once. We size the gate to your driveway width, check the existing posts for rebar corrosion and spalling at the base, and quote honestly if the posts can hold a new automated system or need new footings. On Federal Highway adjacent streets where driveways are tight, we recommend slide gates to avoid the swing arc eating half your parking pad.
Pedestrian Gate
Pedestrian gates in Dania Beach see constant humidity and regular storm-driven rain. A gate with standard steel hinges and a cheap latch will bind within a year. We hang powder-coated aluminum pedestrian gates on marine-grade hardware so the salty breeze off the Intracoastal does not seize the panel shut. These start around $900 installed, depending on width and whether we’re tying into existing pilings or posts.
Sliding Gate
Sliding gates are often the smarter choice on Dania Beach properties with short driveways or sloped approaches, which is a lot of the canal-side homes and older CBS-construction neighborhoods. The rack-and-pinion drives and the roller tracks are exactly where non-marine materials fail around here. We install sliding gates with sealed Linear or BFT operators and corrosion-resistant tracks, and we set the safety photocells and loop detectors to current UL 325 standards before we leave.
Swing Gate
Swing gates are common in Melaleuca Gardens and other mid-century Dania Beach neighborhoods where original wrought iron panels still hang on posts from the 1960s and 1970s. A swing gate can be retrofitted with a modern opener, but only if the hinge posts are sound. We check for rebar rust and base spalling first. If the post is gone, the post is gone, and we’ll tell you that plainly instead of bolting a new motor onto a failing footing.
Security Gate
Dania Beach has plenty of properties on the water where a security gate is doing real work: keeping uninvited guests off the boat dock side, controlling access to the rear yard, or framing an entry off a quiet residential street. We build these with marine-grade 316 stainless hardware as standard and integrate access control, keypads, intercom, and vehicle loop detection where needed. Salt air destroys cheap hardware faster here than almost anywhere in Broward County, so we don’t even quote it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dania Beach
We’re certified to service and install nine major gate brands, and around Dania Beach the ones we most often work with are Linear, BFT, and FAAC. We keep common boards and parts stocked for these brands so Dania Beach customers aren’t waiting on a two-week order when an opener fails. If your old gate has a Linear board that the salt-moisture already killed, we can replace it or swap the whole operator for a sealed unit the same week. Call (877) 610-2993 and we’ll tell you honestly which route costs less.
Common Gate Installation Problems We See in Dania Beach Homes
Dania Beach is not like inland Broward cities. The same gate that lasts twenty years in Davie or Cooper City will fight you within five years here if it’s built with the wrong materials. These are the failures we walk into most often:
- Salt-moisture intrusion into unsealed control boards. Gate motor circuit boards on canal-side Dania Beach properties fail from salt-moisture within two to three years if the control box isn’t marine-sealed. The gate starts opening randomly, or stops responding from a keypad, and the homeowner is told they need a whole new operator. Most of the time, it’s the board and the enclosure. We seal the replacement properly or install a marine-rated unit.
- Original concrete gate posts cracked and spalling at the base. The mid-century CBS homes in Dania Beach often have original concrete gate posts poured 50 to 60 years ago. Salt air reaches the rebar, the rebar rusts and expands, and the concrete cracks at ground level. A new automated gate on that post will lean and bind within a year. We pour new footings with epoxy-coated rebar when the post is compromised.
- Non-marine steel hinges and rack-and-pinion tracks seized or snapped. After a few storm seasons, ordinary steel hardware on Dania Beach slide gates corrodes and seizes. The gate sticks half-open or the drive gear strips. We replace with marine-grade stainless and powder-coated aluminum components so the repair is not a yearly event.
- Legacy openers without modern UL 325 entrapment protection. A lot of Dania Beach homes still run openers from before the 2000s, the old Linear and Viking boards with no safety photocells and no obstruction sensors. These are safety liabilities and fail current UL 325 requirements. If you have one, we’ll show you exactly what it’s missing and quote a retrofit that makes the gate code-compliant and safe for every member of your household.
Pricing for Gate Installation in Dania Beach, FL
Here are honest Dania Beach numbers, because you deserve a real range before you call:
- Pedestrian gate, aluminum with marine hardware: $900-$1,800 installed
- Single swing driveway gate with opener: $2,800-$4,500
- Double swing driveway gate with opener: $4,500-$8,000
- Sliding driveway gate with opener and track: $4,000-$7,500
- Full custom canal-front or estate double gate: $8,000-$12,000+
- Retrofit opener onto an existing, structurally sound gate: $1,100-$2,400
The honest answer is that the price depends on post condition, gate width, and how much of the old hardware is worth saving. We give you the number in writing before work starts. That number does not change at the door. Estimates are free, and there’s no trip charge inside the county. If a national outfit gave you a written estimate, we’ll give you a free second opinion on it. Senior and veteran discounts never expire, and we take $40 off any repair over $200. Call (877) 610-2993.
We Also Serve Cities Near Dania Beach
Gatewood Fence & Gate handles Gate Installation across the Dania Beach area and the surrounding south Broward communities. If you’re in West Hollywood, Melrose Park, Hallandale Beach, or Pembroke Park, the crew that works in Dania Beach is the same one that will show up at your door. Same live phone answer, same written pricing, same Done Right Promise. Call (877) 610-2993 and we’ll schedule it.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Dania Beach
It depends on the hinge posts, not the gate panel itself. If the concrete posts are still sound at the base, with no spalling and no exposed rusted rebar, a retrofit is often the cheaper and fully viable answer. We’ve retrofitted plenty of 1970s gates in Melaleuca Gardens where the panel was solid but the old operator was obsolete. If the post has rusted through, replacement is the cheaper long-term fix because a new opener bolted onto a failing footing will bind and fail within a year or two. We’ll assess it on site and tell you straight. Call (877) 610-2993 for a free estimate.
Broward County’s post-Andrew building code requires gate installations to meet specific hurricane wind-resistance ratings tied to your exact wind-load zone, which in Dania Beach is higher than most inland cities because of the coastal exposure. We design and install gates to meet the current wind-load requirements and we document it. If you’re replacing a gate that predates the modern code, odds are the old one never met any wind standard. Call (877) 610-2993 and we’ll explain what applies to your street.
The most common answer in Dania Beach is salt-moisture intrusion into a control box that was never sealed for a coastal environment. Properties near the Intracoastal or on canal fronts get continuous salt spray and condensation, and the circuit board inside a standard metal enclosure corrodes until it shorts and the gate starts opening or closing on its own. The fix is a marine-sealed enclosure and a properly rated board. We do this routinely. Call (877) 610-2993 and we’ll diagnose it.
Solar openers work in Dania Beach, but they require more attention than in drier climates. Humidity and salt air degrade the panel connections and the battery terminals faster here, and storm-season cloud cover means the panel is undersized for the days in a row of low sunlight we often get. We install solar openers on Dania Beach gates, but we size the panel and battery for the cloudy season and use sealed terminal hardware. If your gate loses power during an extended storm period, the backup battery has to actually be sized for that. We’ll tell you if solar is the right call for your particular gate or if hardwired is the better long-term investment.
If your gate opener was manufactured before the 2000s, it almost certainly does not meet current UL 325 standards for entrapment protection. That means no monitored safety photocells, no obstruction-sensing motor reversal, and no audio alarm in most cases. These are the systems that can pin a child or a pet. We offer free safety assessments for Dania Beach homeowners and we’ll show you exactly what your old opener is missing and what it costs to bring it up to code. A gate is heavy. It deserves respect. Call (877) 610-2993 and we’ll check it.
The Dania Beach Gate Reality Most Companies Don’t Tell You
Dania Beach’s location between the Atlantic Ocean and the Intracoastal Waterway creates a salt-air corrosion environment so aggressive that aluminum gate frames and marine-grade 316 stainless hardware are baseline requirements, not upgrades. The same installation in Fort Lauderdale or Hollywood would not face this level of continuous salt spray and galvanic corrosion. We mean that literally. A powder-coated steel gate that would last fifteen years in inland Broward will begin showing rust bloom at the weld joints within eighteen months on a canal-side Dania Beach lot. Any installer who quotes you a steel gate with standard hardware for a waterfront property here either doesn’t know the environment or doesn’t care about the callback.
We replaced a 1970s wrought iron swing gate on a canal-front property in the Melaleuca Gardens neighborhood, where the original hinge post had rusted through at the base and the gate operator was an obsolete Linear board without UL 325 entrapment protection. Our crew poured new post footings with epoxy-coated rebar, hung a powder-coated aluminum gate with marine-grade hinges, and installed a LiftMaster operator with a loop detector and safety photocells. The whole assembly is now rated for Broward County wind loads and the salt-air conditions that ate the old gate in 40 years. That’s the Dania Beach standard, and we don’t build below it.
Call Gatewood Fence & Gate for Gate Installation in Dania Beach
If you live in Dania Beach and your gate is failing, sagging, corroding, or was never installed right to begin with, call (877) 610-2993. A live person answers, 24/7. We’ll come out, look at what you have, and tell you honestly what it would cost to fix or replace it. The price is quoted and agreed before any work starts. You won’t get a different number at the door.
Hal Gatewood has been at this since 2001. His name is on the shop and on every invoice. The 90-Day Done Right Promise is written on every job: if it’s not done right, we make it right. No runaround. That’s how we’ve worked in Dania Beach through every storm season, every corroded post, and every gate someone else said couldn’t be saved.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dania Beach since 2001.