Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Dania Beach
Gate repair in Dania Beach typically costs $185-$475 for most hinge, post, and motor problems, and a trained crew can usually be at your property the same day you call. Salt air between the Atlantic and the Intracoastal Waterway eats gate hardware faster here than almost anywhere else in Broward County, which means the person fixing your gate needs to know which materials actually survive this environment and which ones fail again in eighteen months. Hal Gatewood has been repairing gates since 2001 and treats Dania Beach jobs with the coastal specs they demand, not the inland fixes that fall apart. Call (877) 610-2993 and a live person answers, any hour, any day.
Why Gatewood Fence & Gate Is Dania Beach’s Preferred Gate Repair Company
This is an owner-operated shop, not a franchise with a van and a logo. Hal Gatewood’s name is on the building, his license number is published, and the person who shows up at your gate in Dania Beach is the same person who’ll remember your hinge saga when you run into him at the diner on Dania Beach Boulevard. We’ve been doing Gate Repair in coastal Broward for decades, and our crew has pulled enough corroded FAAC arms and seized Viking hinges off mid-century gates to tell you exactly what’s failing before we even pull the cover.
Dania Beach homeowners keep calling us back because we repair what other companies want to replace. When a 1963 wrought iron gate on a CBS house near the Dania Pointe area has a rotted post base, the national outfits will quote you a full gate replacement and a two-week lead time. We’ll weld a new base plate in your driveway that afternoon. Every job carries the 90-Day Done Right Promise in writing: if it’s not done right, one call brings us back, no runaround. Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county. That’s not a promotion. That’s how we’ve always worked.
Our Gate Repair Services in Dania Beach
Electric Gate Repair
Electric gate repair in Dania Beach runs $220-$450 when the failure is a circuit board, limit switch, or receiver, and we service the brands you’ll actually see on this stretch of coast: LiftMaster, Linear, Ghost Controls, Viking, and DoorKing. The failure mode we see most often near the Intracoastal is salt-moisture condensation shorting the board inside a control enclosure that was never sealed for marine exposure. We open the box, read the burn pattern, and tell you whether the board can be swapped or whether the enclosure itself needs resealing or relocation. Half the time the board didn’t fail on its own. It drowned.
Automatic Gate Repair
Automatic gate repair in Dania Beach usually means diagnosing why the operator runs but the gate won’t move, or why it stops halfway and reverses. On a 1950s CBS home in the Dania Beach Isles neighborhood, we replaced a corroded FAAC swing gate operator whose original painted steel hinge post had rotted at the base. We poured a new post footing with stainless anchors, swapped in a marine-sealed control box, and realigned the gate to clear the warped panel. The homeowner’s old LiftMaster board had already shorted twice from salt air before we got there. That job is the rule here, not the exception.
Hinge & Post Repair
Hinge and post repair in Dania Beach runs $185-$380 depending on whether the post needs a new footing or the hinge pins can be extracted and replaced. What looks like a sagging gate is almost always a hinge post that’s rotted at ground level, and fixing the panel without addressing the post means you’ll fix it twice. Along the coast, galvanic corrosion between original steel hinges and aluminum gate frames freezes hinge pins solid within five years of installation. We cut the old hardware off, weld stainless replacements, and set the post in a footing that survives hurricane season and the salt spray that comes with it.
Gate Realignment
Gate realignment in Dania Beach runs $150-$300 for a standard driveway swing gate. Warped panels aren’t necessarily trash. Often the hinges have shifted or the post has settled, and the gate just needs to be re-set on new hardware and balanced. We’ll also check the reveal against the house side and the latch throw. On properties east of Federal Highway, we see posts drift slightly after heavy storm seasons, and what was a square gate in March is dragging a corner by August. Realign it before the operator burns out fighting the bind.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dania Beach
We’re certified to service nine major gate brands, and in Dania Beach the three we work on most are Linear, Viking, and DoorKing. These are the operator arms and boards that hold up longest in salt air when they’re maintained, and the ones we keep common parts for so we’re not waiting on a distributor in Fort Lauderdale while your driveway stays open to Dania Beach Boulevard at midnight. We also weld brackets and hinge plates to fit whatever is already on your posts, so a brand-name part doesn’t force a brand-name replacement when a simple fix is stronger anyway.
Common Gate Repair Problems We See in Dania Beach Homes
- Frozen hinge pins from galvanic corrosion: Original steel hinges bolted to aluminum gate frames corrode at the contact point within a few years of install, and the pin seizes. We cut the hinge, not the gate, and replace with stainless or marine-grade hardware.
- Board short circuits from salt-moisture condensation: On humid summer nights, non-sealed operator boxes along the Intracoastal sweat on the inside, and the board shorts. A marine-sealed enclosure is the only fix that lasts more than two seasons.
- Post footing spalling in mid-century anchor points: Dania Beach’s 1950s and 1960s CBS homes were built with concrete mixes that crumble when you drill for heavier modern gate operators. We refit the anchorage, not just the bracket.
- Rust-through at the weld seam on painted steel gates: Fifty years of salt air and the first thing to go is the seam where the pickets meet the bottom rail. We cut out the rot, weld in new steel, and repaint with a marine-grade coating that actually slows the next round.
Pricing for Gate Repair in Dania Beach, FL
We quote every Dania Beach gate repair before any work starts, and that number is what you pay. No “we discovered more while we were in there” surprises. Here’s what you can expect in this market:
| Repair Type | Typical Cost in Dania Beach |
|---|---|
| Hinge replacement (1-2 hinges) | $185-$320 |
| Weld & rust repair (per section) | $150-$350 |
| Electric gate board/limit repair | $220-$450 |
| Post reset with new footing | $280-$575 |
| Full gate realignment | $150-$300 |
We keep $40 off any repair over $200, and we’ll give you a free second opinion on any written estimate another company gave you. A senior or veteran discount of 10% applies to everything, automatically, for life. If you want the exact number for your gate, call (877) 610-2993 and we’ll give it to you before we touch a tool.
We Also Serve Cities Near Dania Beach
If your property is just outside the city line, you’re still covered. Our crews regularly serve West Hollywood, Melrose Park, Hallandale Beach, and Pembroke Park from the same local route. If you’re anywhere in the coastal strip south of Fort Lauderdale, chances are we already know the neighborhood. For more detail on our full coverage area, see Gate Repair in Dania Beach.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Dania Beach
Because Dania Beach sits between the Atlantic Ocean and the Intracoastal Waterway, salt-laden humidity condenses inside non-sealed operator enclosures during summer nights and shorts the circuit board. This kills boards in two to three years here, versus five to seven inland. The fix is a marine-sealed control box, not just another board. Call (877) 610-2993 and we’ll tell you whether your enclosure is coastal-grade or waiting to fail again.
A galvanized steel hinge in Dania Beach lasts three to five years before the coating breaks down and the pin seizes. The zinc layer gets eaten by constant salt spray, then galvanic corrosion starts between the steel and the aluminum gate frame. Stainless marine-grade hinges last far longer, and that’s what we install here. It costs a little more up front and a lot less by the third year.
Yes. Broward County’s post-Andrew wind-load code requires gate installations to meet specific hurricane wind-resistance ratings, and Dania Beach properties fall under that requirement. A new automated gate has to be anchored and sized to the wind-load map, not just bolted to existing posts. We handle that compliance as part of the job. Call (877) 610-2993 for a free measure and written price.
The weld seam at the bottom rail goes first. Salt air concentrates there, rust blooms under the paint, and the seam rusts through from the inside while the visible paint still looks okay. After that, the hinge posts rot at ground level. Both are repairable with on-site welding, and that’s exactly what we do in driveways across Dania Beach rather than hauling the gate away. Call (877) 610-2993 for a quote.
Yes, and usually that symptom points to salt-moisture corrosion on the limit switches or a failing capacitor in the operator, both of which are coastal-common. We diagnose it on site, clean or replace the affected components, and seal the enclosure against the next humid season. A halfway-stopping gate isn’t a motor replacement in most cases. It’s a $150-$300 component repair.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, proudly repairing gates across Dania Beach and coastal Broward County since 2001.