Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Dania Beach
If you’ve got a sagging iron gate, a hinge post that’s rotted through at the base, or a swing arm that binds every time the motor tries to move it, the fix usually comes down to two things: the right parts and a weld that actually holds in Dania Beach’s salt air. We’re Gatewood Fence & Gate, and Hal Gatewood has been repairing gates since 2001, owner-operated the whole time. Our Gate Parts & Welding crew works on Dania Beach driveways and fence lines every week, cutting out rusted posts, replacing worn hinges and rollers, and welding repairs that stay true. Call (877) 610-2993 any hour. A live person answers.
Why Gatewood Fence & Gate Is Dania Beach’s Preferred Gate Parts & Welding Company
Most of our Dania Beach work comes from people who already watched one company quote a price on the phone and send a different invoice to the door. That’s not how Hal runs a job. Every repair carries the 90-Day Done Right Promise in writing: if it’s not done right, one call brings him back. No runaround.
We’re locally owned and owner-operated. Hal Gatewood’s name is on the shop and on every invoice, and the address is published for anyone who wants to stop by and look him in the eye. That kind of accountability matters in a city like Dania Beach, where homes sit between the Atlantic and the Intracoastal and a bad weld shows itself within a season.
Our crews serve Dania Beach locally, coordinated from the brand’s South Florida office in Miami. When you call, you get a live person 24/7, not a voicemail and not a queue. And the person who shows up for the estimate is the kind of person who will be back to stand behind the work.
Our Gate Parts & Welding Services in Dania Beach
Hinge Replacement
In Dania Beach, standard zinc-plated hinge pins and barrels pit within months from salt exposure, especially anywhere east of Federal Highway. We replace them with 316 stainless hinges and shoulder bolts that don’t seize. The old hinge plates get ground down clean, the new ones get stitch-welded rather than bolted where the gate’s weight demands it. On mid-century wrought iron gates, we adjust the barrel alignment so the gate swings level again instead of dragging on the concrete drive.
Post Replacement
The buried base of a hinge post is where Dania Beach gates die first. The post looks fine above ground and is rusted to paper at the footing from decades of brackish groundwater and salt-saturated soil. We saw one on a 1960s CBS home near the Dania Cut: original wrought iron swing gate hanging off a hinge post rotted through at the base, LiftMaster operator still trying to pull it open. We cut out the failed post, poured a new footing, and replaced both hinges with 316 stainless, then welded a sag correction plate into the bottom rail so the gate tracked true again. That’s the repair, not a haul-off-and-replace job.
Rail Repair
Older welded steel rails on Dania Beach driveway gates collect moisture at every joint, and the welds fail from the inside out. We cut back the rot, sleeve the rail with new steel where it’s still salvageable, and run fresh welds top and bottom. If the bottom rail has bowed from years of a sagging leaf, we weld a stiffener plate into the channel. For gates that have to meet Broward County’s post-Andrew wind-load codes, that stiffener is often the difference between a pass and a fail when you eventually retrofit an operator.
Custom Welding
Sometimes the part simply doesn’t exist anymore. A 60-year-old Dania Beach gate hinge with weird spacing, a broken latch tab on a custom driveway gate, a slide track that was welded to fit a non-standard post. We fabricate and weld on site at your Dania Beach property, so the gate never leaves your driveway. If a repair is possible, Hal fixes it. If welding new steel is cheaper than hunting a discontinued part, he’ll tell you that too.
We also handle Gate Parts & Welding in Dania Beach work that includes gate rollers replacement and latch and lock adjustment, because those wear points are exactly what salt air attacks on every mid-century CBS home.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dania Beach
We service and stock parts for Viking, Ghost Controls, DoorKing, and Elite operators, among others. That matters in Dania Beach because when a control board dies near the Intracoastal, you don’t want to wait a week for a part to ship from a warehouse in Ohio. We carry common boards and limit switches for these brands, and we’re certified to service nine major gate brands including LiftMaster, FAAC, BFT, Linear, and Mighty Mule. If your operator is older than the current model line, we can often find a compatible board rather than selling you a whole new motor.
Common Gate Parts & Welding Problems We See in Dania Beach Homes
- Salt-moisture intrusion into unsealed control boards. On Intracoastal-front properties, a swing operator board can short out in two to three seasons if the control box isn’t marine-sealed. The inland version of the same board lasts years longer, so the failure looks sudden and mysterious when it’s really routine corrosion.
- Rusted-through hinge posts on 1950s-70s wrought iron gates. The buried base corrodes first, the gate sags, and the operator struggles against the bind. Replacing the post is the only real fix. Fixing the panel without the post means fixing it twice.
- Zinc-plated hinges and rollers pitting within months. Scratchy, grinding operation isn’t a lubrication problem by the coast, it’s hardware that’s already degrading. Stainless is the baseline here, not an upsell.
- Older welded rails failing post-Andrew wind-load inspections. When a slide gate gets retrofitted with an operator, the county wants to see the gate structure meet current hurricane wind-resistance ratings. A 40-year-old welded rail that was fine for manual use can fail that inspection, and a stiffener plate or new rail welds get it compliant.
Pricing for Gate Parts & Welding in Dania Beach, FL
Dania Beach pricing runs close to the Broward County market, with a few coastal adjustments for the hardware we refuse to skimp on. A typical hinge replacement on a single swing gate runs $180 to $340 depending on gate weight and whether we’re welding or bolting. Replacing a rotted hinge post with a new steel post and footing runs $450 to $900, more if the gate needs to be re-hung and realigned. Rail repair with weld-up stiffening runs $250 to $550. Custom welding and fabrication runs $95 to $150 an hour plus material. You’ll know the number before we start, and the price is quoted and agreed before any work begins. We don’t show up with one number and leave with another.
Call (877) 610-2993 for a free estimate. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Dania Beach
If you’re in West Hollywood, Melrose Park, Hallandale Beach, or Pembroke Park and need gate welding or hinge work, we’ll run the same salt-air-aware service to you. Much of that area shares Dania Beach’s coastal corrosion pattern, and the same stainless hardware choice applies. Call (877) 610-2993 and we’ll schedule a time that works.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Dania Beach
Dania Beach sits directly between the Atlantic and the Intracoastal Waterway, which puts salt-laden air on both sides of the city. Inland Hollywood gets the same humidity but far less airborne chloride, so standard zinc plating survives years longer there. In Dania Beach, 316 stainless hardware is the baseline repair, not an upgrade. Call (877) 610-2993 and we’ll tell you honestly whether your hinges can be saved.
Yes, in most cases. The gate leaf itself is usually solid because it dries from both sides and gets painted. The post is what rots at the buried base. We cut out the failed post, pour a new footing, and re-hang the original gate on new stainless hinges. Hal would rather repair the door he can still save than sell you a new one. Call us for a free look at the post.
It’s almost always a hinge post or hinge barrel problem, not the operator. When the post rots at the base, the whole gate leaf drops, dragging on the concrete. The operator keeps pushing because it’s working fine, which is why it looks like a motor issue. We fix the post, re-hang the gate, and the scrape disappears without touching the motor. Call (877) 610-2993 for a diagnosis.
Replacing hinges alone doesn’t usually trigger a wind-load review, but if you’re also adding or repairing an operator on a slide gate, the county will look at the whole gate structure. A 40-year-old welded rail that was fine for hand operation can fail that inspection, and we’ll recommend the stiffening work before you get a correction notice. The estimate spells out what’s optional and what’s required.
Salt-moisture intrusion. The board in the control box near the water takes airborne chloride every day, and without a marine-sealed enclosure, the corrosion shorts out components within two to three seasons. Your brother’s board sits in drier air and lasts years longer. We replace the board, seal the enclosure, and move the box if it’s in a bad spot near a seawall or canal edge. Call (877) 610-2993 for an exact quote, estimates are free.
If your gate sags, scrapes, or won’t close, call us at (877) 610-2993. We’ll come out to Dania Beach, tell you exactly what corroded, what it costs to fix, and what will actually last in this salt air. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Dania Beach since 2001.