Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Cedar Park
Gate installation in Cedar Park isn’t just picking a panel and digging a post hole. If you live in Twin Creeks, Buttercup Creek, Forest Oaks, or any of the dozens of HOA-governed subdivisions across 78613 and 78630, your gate has to match the architectural review committee’s approved finish, height, and hardware style before the first post goes in. We’ve been doing this long enough to know that skipping that step gets a perfectly good gate sent back. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and the crews that serve Cedar Park live in the area. Call (877) 610-2993 and a real person answers, 24 hours a day.
Why Gatewood Fence & Gate Is Cedar Park’s Preferred Gate Installation Company
We’re the outfit that shows up when a national company quoted one price over the phone and a different one at the door. Hal Gatewood’s name is on the shop, the address is published, and the license number is there for anyone to look up. That’s the accountability Cedar Park homeowners tell us they’ve been missing.
Our crews work in Cedar Park every week. We know which neighborhoods require aged-iron finish versus bronze, which CC&R documents demand specific heights, and which management companies actually respond when you file an architectural request. That means fewer callbacks, fewer HOA rejections, and a gate that passes the first time.
Every job carries the 90-Day Done Right Promise in writing. If the gate sags, binds, or the operator misbehaves within 90 days, one call brings us back. No runaround, no fine print. And because we stock parts for Viking, Ghost Controls, DoorKing, and Elite operators locally, Gate Repair - Cedar Park and finishing touches don’t wait on a warehouse three states away.
We also answer the phone. Not a voicemail, not a call center. A live person who can tell you when the crew will get to Cedar Park and what the job actually needs. That matters when your gate is stuck open at 9 p.m. and your dog is eyeing the street.
Our Gate Installation Services in Cedar Park
These are the jobs we do most often in Cedar Park, and the local factors that change how we approach each one.
Swing Gate Installation
Single and double swing gates are the most common driveway gates in Cedar Park’s mid-2000s builds, and they’re the ones that suffer most from our clay soil. A swing gate lives and dies by its hinge post being perfectly plumb. In Cedar Park, the black clay under Twin Creeks and Buttercup Creek expands and contracts so aggressively that a hinge post can tilt a full inch within two years. We set posts deeper than code minimum, below the shrink-swell zone, and we don’t skip the concrete collar. When you call for Gate Installation, we start with the post footing, not the panel.
Pedestrian Gate Installation
Pedestrian gates are what we install alongside driveways, around side yards, and at community pool or amenity entries in Cedar Park’s master-planned neighborhoods. These gates carry lighter loads than driveway gates, but they still fight the same clay movement and the same HOA finish rules. We match the existing ornamental iron or steel aesthetic, and we set the latch so it doesn’t bind when the post shifts a quarter inch after the first rainy season. For HOA communities, we can coordinate the architectural approval paperwork on your behalf.
Sliding Gate Installation
Sliding gates work well on flatter Cedar Park lots, especially where a swing gate would arc across a sidewalk or into a drainage swale. But sliding gates are sensitive to grade. Cedar Park’s flatlands look level until you set a track and watch the clay heave it into a shallow wave. We pour a continuous concrete track bed and account for seasonal movement from the start. We also install the proper stop and catch assembly so a rolling gate can’t jump its track when a kid pushes on it.
Double Gate Installation
Double gates are the showpiece on Cedar Park’s larger semi-custom homes, and they demand the most precision. Both leaves have to meet at exactly the right reveal, with drop rods and a cane bolt holding the inactive leaf solid. If one hinge post moves even half a degree out of plumb, the gates bind at the center. We handle Gate Parts & Welding in Cedar Park on site rather than shimming. And if your double gate needs a Viking or Ghost Controls operator, we’ll size it for the full panel weight and wind load, not just the “typical” rating.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cedar Park
We’re certified to service nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite. In Cedar Park, Viking and Ghost Controls operators are everywhere on mid-2000s semi-custom homes, and DoorKing shows up on a lot of shared community entry systems. Because we keep common control boards, safety photocells, and actuator parts in stock, a Cedar Park homeowner doesn’t wait a week for an operator swap. If the HOA requires a specific operator brand at the community entry, we’ll quote it and install it without fighting you on the spec.
Common Gate Installation Problems We See in Cedar Park Homes
- Clay-driven post heave: Cedar Park sits on shrink-swell Vertisol clay that tilts hinge posts out of plumb after heavy rain. A gate that dragged over the latch post last spring was probably plumb the year before. We reset the post below the active clay zone and re-hang the gate from a stable base.
- HOA finish mismatch: Installing generic black hardware in a neighborhood that requires aged-iron or bronze gets a redo notice from the architectural review committee. We pull the CC&Rs before quoting so the finish matches the community’s approved palette.
- UV thermal binding: Steel gates expand in Cedar Park’s 100°F+ summers, and when clearances were set tight at the original installation, the gate binds against the frame. Add clay movement reducing the gap further, and the gate jams. We set proper thermal clearances and adjust for post movement from day one.
- Operator strain on sagging gates: A Viking or Ghost Controls operator will burn out its limit switches trying to close a gate that’s sagging into the ground. The fix is resetting the post and re-hanging the gate, not just replacing the operator. Fix the panel without the post and you’ll fix it twice.
Pricing for Gate Installation in Cedar Park, TX
A single swing gate installation in Cedar Park typically runs $2,800 to $5,500, depending on panel width, finish, and whether you’re adding an operator. A double swing gate with operator usually lands between $6,000 and $11,000. Sliding gates run $4,500 to $9,000 based on track length and panel fabrication. Pedestrian gates are the most affordable at $1,200 to $3,200 installed. These are installed prices including post setting, hardware, and on-site adjustment. Gate operators alone run $900 to $2,800 installed when the existing gate is sound.
We quote a written price before any work starts, and that price doesn’t change at the door. Every Cedar Park estimate is free, and we offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Cedar Park
Our Cedar Park crews regularly run jobs in Brushy Creek, Anderson Mill, Jollyville, and Leander, so if you’re right across the city line and dealing with the same clay soil and HOA requirements, we’ll make the drive. You can learn more about our full coverage area on our Gate Installation in Cedar Park page, but the short version is simple: if you’re in the Cedar Park area and need a gate, we’ll be there.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Cedar Park
Yes, in most Cedar Park HOA-governed communities you must get architectural review committee approval before installing or significantly changing a driveway gate. Twin Creeks, Buttercup Creek, and Forest Oaks all have CC&R sections covering gate height, material, finish, and operator placement. We’ll pull the documents and file the approval request for you, and we stock the finishes those committees have already approved so the gate passes the first time. Call (877) 610-2993 and we’ll check your neighborhood’s requirements before we even quote.
Cedar Park sits on a thick band of shrink-swell Vertisol clay that expands after rain and contracts during summer drought, and this movement tilts gate posts far more than the sandier soils to the south and east do. Cedar Park’s flat terrain also means water doesn’t drain away from post footings as quickly, so the soil around the base stays wet longer after a storm. That’s why we set posts below the active clay zone and pour a deeper concrete collar here than we would in some neighboring cities. The post is the foundation of the whole gate, and in Cedar Park, the post fights harder.
Usually yes, but only after we reset the hinge post and re-hang the gate so it swings true. Mounting a Viking, Ghost Controls, or Elite operator on a sagging gate burns out the limit switches and the actuator, and the safety photocell won’t align properly. On site we reset the post, weld any stressed pickets, and then mount and calibrate the operator so it starts from a stable gate. A new operator on a bad post is a warranty claim waiting to happen, and that’s not the work we do. Call (877) 610-2993 and we’ll assess the gate first before recommending an operator.
Most Cedar Park HOAs require a specific ornamental iron or steel finish, usually aged-iron, bronze, or a matte black with particular texture, plus matching hinges, latch, and operator arm color. If a technician shows up with generic black powder-coat in a neighborhood that specified bronze, the architectural review committee will flag it and the gate gets redone. We verify the CC&R finish spec before we quote, and we order or fabricate to match. That’s why our Gate Installation team hasn’t had an HOA rejection in the last three years.
We coordinate directly with the management company or HOA board: we review the CC&R requirements, submit the architectural request with the proposed panel design and finish, get written approval, schedule the installation around resident access, and handle the final walkthrough with the board representative. A shared community entry gate is a safety and access issue for every resident, so we don’t cut corners on our Gate Access Control in Cedar Park, the operator’s UL 325 entrapment protection, or the safety edges. If your community entry gate needs full replacement, call (877) 610-2993 and we’ll start the approval process the same week.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cedar Park and surrounding communities since 2001.