Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Cedar Park
Most gate failures in Cedar Park aren’t random. They’re the predictable result of our expansive clay soil heaving posts out of plumb, our 100°F summers baking builder-grade operators, and HOA communities that demand specific finishes no generic shop keeps on the truck. We fix all of it, and we do it in your driveway. Hal Gatewood has been repairing and welding gates since 2001, and our Gate Parts & Welding crew handles everything from a sagging hinge in Buttercup Creek to a full post reset in Twin Creeks. If your gate won’t latch, won’t open, or won’t stay square, call (877) 610-2993 and talk to a live person who knows Cedar Park’s soil, its HOAs, and its gates.
Why Gatewood Fence & Gate Is Cedar Park’s Preferred Gate Parts & Welding Company
We’re the company Cedar Park homeowners call after the first repair doesn’t hold. The pattern we see constantly: a builder-grade hinge post heaved by the same clay that makes driveways crack, a technician swapped the hardware but never touched the footing, and six months later the gate sags again. Fix the panel without fixing the post and you’ll fix it twice. We start where the problem actually lives, which in Cedar Park means below the topsoil, not on the hinge leaf.
Our customers across 78613 and 78630 know two things about us. First, the person who answers the phone is the person who owns the company, not a call center three states away. Second, every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no invoice. That’s the oldest accountability there is: the name is on the shop, and the shop is down the road.
We’ve welded gates on Ronald Reagan Boulevard, reset posts off Lakeline, and matched HOA-spec finishes in Forest Oaks. When a Cedar Park gate fails, we send a real person who lives in the same climate you do, not a trainee who’s never seen shrink-swell clay. For a free estimate, call (877) 610-2993.
Our Gate Parts & Welding Services in Cedar Park
Here’s what we actually do in Cedar Park, not a list of things we might do somewhere else. Each of these is a repair we’ve done in this city dozens of times.
Hinge Replacement
Cedar Park’s wet-dry cycles are brutal on hinges. When the clay swells after spring rain, posts tilt. When summer drought hits, the clay contracts and the post settles the other way. Hinges take all that movement. A hinge replacement in Cedar Park runs $140-$380 depending on gate weight and whether we’re welding a new leaf or bolting one on. If the post has shifted, the hinge is the symptom, not the cause. We’ll tell you straight which one it is before any work starts.
Post Replacement
This is the big one in Cedar Park. The Vertisol clay under most of the city moves so much that posts set at standard depth will heave within a few seasons. We cut the old post free, set a new footing below the active soil zone, weld the post square, and re-hang the gate. Typical post replacement in Cedar Park runs $450-$1,100 depending on post size, gate weight, and whether we’re working around existing conduit. It’s the repair that actually stops the sagging.
Rail Repair
Steel gates in Cedar Park take a beating from thermal expansion in summer. A top rail that binds in the frame when it’s 104°F outside, a bottom rail that’s rusted through from sprinkler overspray, a mid-rail cracked at a weld point. Rail repair usually runs $180-$420, done on site with our mobile welder. No hauling your gate off to some shop. You watch it get fixed in your driveway.
Custom Welding
This is where Hal’s 29 years of running a torch shows. Cedar Park HOAs are picky about materials and finishes. If a builder welded the gate in a specific bronze or aged-iron finish, we weld the repair in that finish, not whatever black powder-coat is on our truck. Custom welding runs $200-$600 for a typical repair, more for fabrication. If we need to match a finish, we match it. The HOA architectural review should never see a difference.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cedar Park
Most mid-2000s builds in Cedar Park came with either a Viking, LiftMaster, or Ghost Controls operator, and we see those names constantly. We’re certified to service all of them, plus DoorKing, Linear, FAAC, BFT, Elite, and Mighty Mule. We keep common parts for these brands stocked for fast same-week turnaround on Cedar Park repairs. If your opener is acting up and you don’t know what brand it is, call (877) 610-2993 and we’ll walk you through identifying it.
Common Gate Parts & Welding Problems We See in Cedar Park Homes
- Builder-grade operators failing in summer heat: The openers installed in Cedar Park’s 2000s build wave were often the cheapest unit that met code. At 100°F+, their actuators burn out fast. We replace them with correctly rated equipment and size them for gate weight and cycle count.
- Posts heaving out of plumb on the black clay: This is issue number one in Cedar Park. The shrink-swell cycle tilts posts, throws hinges out of line, and misaligns latches. If we don’t reset the footing below the active soil zone, the gate will sag again within a season.
- HOA finish mismatches: A generic black powder-coated hinge or weld patch on a bronze or aged-iron gate will get flagged by architectural review. We stock Cedar Park’s common HOA-spec finishes and check CC&Rs before quoting so the repair passes the first time.
- Thermal binding on steel gates: Cedar Park’s summer heat expands steel enough that gates bind in their frames, especially on west-facing installations. We see it on Ronald Reagan Boulevard, Lakeline Boulevard, and every subdivision in between. Relief cuts or hinge adjustment solves most cases.
Pricing for Gate Parts & Welding in Cedar Park, TX
Here’s what you should expect to pay in Gate Parts & Welding in Cedar Park, because you deserve a number before you commit:
- Hinge replacement: $140-$380
- Post replacement (single post, standard depth reset): $450-$1,100
- Rail repair: $180-$420
- Custom welding (in-driveway repair): $200-$600
- Latch and lock replacement: $90-$250
- Gate roller replacement: $120-$340
The price we quote is the price you pay, agreed in writing before any work starts. No trip charge inside the county, $40 off any repair over $200, and a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Cedar Park
Our crew covers Cedar Park and the surrounding area regularly, including Brushy Creek, Anderson Mill, Jollyville, and Leander. If you’re just outside Cedar Park and your gate is sagging, call us. We’ll tell you if we can get there this week and give you an honest price before we come out.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Cedar Park
Because the hinge isn’t the problem. The post below it is. Cedar Park’s clay soil swells when it rains and contracts in drought, and that cycle slowly tilts gate posts out of plumb. Tightening the hinge pulls the gate tight for a few weeks, then the post shifts again. The fix is a post reset: cut the old post free, set a new footing below the active soil line, weld the hinge post square, and re-hang the gate. We do this in Cedar Park constantly, and it’s the repair that actually holds. Call (877) 610-2993 and we’ll tell you if your sag is a hinge problem or a footing problem within the first ten minutes on site.
Yes, and we do it regularly in Buttercup Creek and similar mid-2000s subdivisions where gates were built without automation. The honest challenge is power: most of those gates never had conduit run to the post, so we either trench a new electrical run or install a properly sized solar kit with battery backup. We’ll quote the whole job, including operator, mounting, safety edges, and power, before we start. Adding automation to an existing gate in Cedar Park typically runs $1,800-$4,500 depending on the gate’s weight and the power distance. Call (877) 610-2993 for a free measure.
Yes. We pull CC&Rs before quoting any gate repair in a Cedar Park HOA, and we keep the common spec finishes on the truck: bronze, aged iron, dark bronze, and matte black. If your neighborhood’s architectural review committee requires a specific powder-coat or patina, we match it before we weld, not after. That’s why we don’t get sent back. Mention your HOA when you call (877) 610-2993 and we’ll confirm the finish before the first visit.
Swing gates fail at the hinge post when clay movement tilts the post. Slide gates fail at the track and rollers when the ground shifts and the track falls out of level. Same soil, different failure point. A swing gate repair in Cedar Park usually means post and hinge work. A slide gate repair usually means re-leveling the track, replacing rollers, and adjusting the operator. Both are jobs we do weekly on lots all through 78613 and 78630. Call (877) 610-2993 and describe what your gate is doing; we’ll tell you which type of failure you’re looking at and give you a price range before we come out.
Partly, yes. Cedar Park gets plenty of sun, but the builder-grade solar panels installed on 2000s gates were undersized, and the batteries were often the cheapest sealed lead-acid available. After a decade of Central Texas heat, those batteries are shot, and the panel is barely charging. We see it constantly in Twin Creeks, Forest Oaks, and Buttercup Creek. The fix is usually a properly sized panel, new deep-cycle batteries, and a charge controller that won’t cook them. We can also run AC power to the gate if it’s feasible, which eliminates the solar problem entirely. Call (877) 610-2993 and we’ll check your panel output and battery health on site.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cedar Park and the surrounding area with on-site welding and gate repair since 2001.