Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Camas
A new Camas Gate Access Control driveway gate usually runs $2,800 to $7,500 installed, with sliding gates trending toward the upper end on hillside lots. Most installations take one to two days once materials arrive and the site is measured. If you’re reading this because an east wind storm just racked your old gate out of square, call (877) 610-2993 and a live person will answer, day or night.
We work in Camas every week. The difference here isn’t the gate, it’s the ground and the wind. Prune Hill slopes, shared driveways, compact downtown lots off Everett Street, older 1990s subdivisions where posts were nobody’s priority, we know them all. Gate Installation in Camas is not a generic job for us. It means accounting for the Gorge, the grade, and the way two households share a fence line.
Why Gatewood Fence & Gate Is Camas’s Preferred Gate Installation Company
Hal Gatewood has been installing and doing Gate Repair - Camas since 2001, and his name is on the shop. That’s the oldest accountability there is. When a Camas homeowner calls, they talk to a person who can look at a photo, ask about the slope, and tell them whether the post is the problem before anyone drives out.
Camas customers tend to ask the same three things: will the gate hold in the east wind, will it clear the shared driveway when both households are coming and going, and will the quote match the invoice. The answer to all three is yes, and the third one is in writing. Every job carries the 90-Day Done Right Promise, stamped on the invoice. If it’s not done right, we make it right.
We answer the phone with a live person 24 hours a day, seven days a week. Not a voicemail tree. Not a chatbot. A person who knows the difference between a FAAC and a Viking operator. Response time to most Camas neighborhoods is same-day for a site visit when you call before noon.
Our Gate Installation Services in Camas
We design and build gates for the way Camas lots actually work. Here are the four installations we handle most often, and what they look like in this city. Our Gate Installation team handles each one from first measurement to final limit calibration.
Sliding Gate
On a steep Camas lot where a swing gate would arc into the hillside or block a shared driveway, a sliding gate is usually the answer. We set the post footings deeper than standard, run rack and pinion track, and size the operator for the wind load. Prune Hill slide gates take lateral force that flat Clark County gates never see, so the track bed and post concrete matter more than the panel itself.
Swing Gate
Swing gates still work well on flatter Camas properties and lots with a single approach. But the east-facing side of Prune Hill is a different animal. We oversize hinge posts there and use heavier hinge hardware than is called for in the manufacturer spec. A standard 24-inch post setting will rack out of plumb within one wind season on those slopes. We don’t do that.
Double Gate
Double gates are common on Camas driveways that need a wider opening for a truck, boat trailer, or RV. They also introduce a second failure point: the center latch and the two operator arms have to move in sync. We tune both limit switches on site and make sure the pedestrian break point stays clear even on narrow downtown Camas lots near Garfield Street.
Pedestrian Gate
Pedestrian gates are the quiet workhorse. They take daily use, kids, dogs, deliveries, and the same Gorge wind as the big gate. On a hillside lot where the small gate sits on a sloped side yard, we set the hinge post in a concrete mass that would look oversized from the outside but holds the panel true year after year.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Camas
We install and service operators from Viking, Ghost Controls, DoorKing, Elite, FAAC, LiftMaster, and others. We stock Gate Parts & Welding - Camas locally, so a limit switch or a photocell replacement doesn’t mean waiting a week for a freight box. Hal is certified on nine major brands and can talk you through operator selection in plain English, whether you want a simple keypad or a phone-app control with battery backup.
Common Gate Installation Problems We See in Camas Homes
- Post shift on hillside lots. The wet Pacific Northwest winters soften soil around posts, especially on the steeper lots off Sierra Street and along the Prune Hill ridgeline. A post that shifts half an inch binds the track and the operator, and the gate starts grinding instead of gliding.
- East wind racking on swing gates. The same November wind event that strips roof shingles off Camas garages will bend drop-rod hardware and shear hinge screws from softwood posts. Gates that survived ten years in Vancouver will fail their second Camas winter if the hinge post is undersized.
- Shared driveway operator confusion. Loop detectors tuned for single-household traffic cause false reversals when two families use the same gate at different times. The operator constantly cycles, overheats, and wears out years early. We tune for the actual traffic pattern, not the default setting.
- Frost heave on slide gate track. Camas freeze-thaw cycles are mild but real. On a hillside lot, even a half-inch of heave at the track bed will cause motor overcurrent and limit drift. We pour the track base deeper and run the track in sections that can handle a little movement without binding.
Pricing for Gate Installation in Camas, WA
Here are real numbers for the Camas market. A single swing gate with a basic operator runs $2,800 to $4,200. A sliding gate on a hillside lot runs $4,500 to $7,500, with the upper end covering longer track runs, wind-rated posts, and operator upgrades. A double gate runs $5,000 to $9,000 depending on the operator and the post work. Pedestrian gates run $1,200 to $2,800 installed.
Every quote is written, specific, and agreed to before any work starts. The price we quote is the price you pay. We offer $40 off any installation over $200, no trip charge inside Clark County, and a permanent 10% discount for seniors and veterans. A free second opinion on any written estimate is yours for a phone call. Call (877) 610-2993 and we will send someone to measure, look at the ground, and hand you a number in writing.
We Also Serve Cities Near Camas
Camas is home base for this page, but we work the whole east side of Clark County. We install gates in Washougal, Mill Plain, Orchards, and Barberton the same week we quote them. If your property sits on the line between Camas and Washougal, that’s not a boundary for us, it’s just the next road over.
Serving Camas, WA - Our Local Coverage Area
We’re based in the Camas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Camas
On a sloped Camas lot, we set hinge posts at least 36 inches deep, and often deeper on east-facing Prune Hill slopes where the Gorge wind applies sustained lateral load. Standard 24-inch settings fail inside one wind season here. The concrete mass matters too, not just the depth. We oversize the footing so the post acts like a set of roots rather than a fence stake. Call (877) 610-2993 and we will tell you honestly if your existing posts are deep enough to reuse or need to be pulled and reset.
Yes, and it’s usually the better choice when two households share the entry. A swing gate blocks stacking space and creates a choreography problem at rush hour. We install slide gates on shared driveways in Camas regularly, including one off Sierra Street where we set 36-inch footings, ran rack and pinion track with a FAAC operator, and added safety photocells at both the vehicle and pedestrian break points. Both households kept using the driveway during construction. Call us for a site visit and we will tell you exactly what will fit your right of way.
Because the wind pushes the gate panel past its set travel limit. The operator reads that as an obstruction or a missed limit and drifts out of calibration. It’s not the operator’s fault. In Camas, the fix is a gate that doesn’t flex in the wind and an operator sized for the load, plus limit switches that get checked after the first big east wind event each fall. If your gate is drifting now, call us and we will recalibrate and inspect the hinge hardware the same day.
Usually not in a heavily treed Camas hillside lot. Solar operators need direct sun on the panel for most of the day, and the Douglas fir canopy on the north slopes of Prune Hill blocks too much of it. A 12-volt battery with an AC trickle charger or a low-voltage line run is typically more reliable. We will tell you that before you buy anything, because the wrong setup costs more than a proper line run.
We stage the work so the pedestrian gate goes in first and stays passable the whole time. On tight downtown Camas lots, there isn’t room to block the walkway for a day. We set the pedestrian hinge post, hang the small gate, then build the double gate in stages. Dogs, kids, and the mail carrier keep moving. That sequence is part of the written plan before we start.
Call Gatewood Fence & Gate for Your Camas Gate Installation
If you live in Camas and you’re tired of a gate that sags, racked, binds, or needs a second look after every wind event, call (877) 610-2993. Hal Gatewood will answer. He has been doing this since 2001, his name is on the shop, and the 90-Day Done Right Promise is in writing. A live person answers 24/7. Estimates are free, the quote is the quote, and the same person who measures your gate is the person who builds it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Camas since 2001.