Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Camas
Gate repair in Camas, WA typically runs $180-$640 for common fixes like hinge replacement, post stabilization, or operator recalibration, and most jobs are completed same-day or next-day. We’ve worked on hundreds of gates throughout Camas, from the hillside subdivisions off Prune Hill to the older downtown streets, and we show up with the truck stocked for the job. If your gate is sagging, stuck, or the opener quit responding, call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Camas’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop, the invoice, and the work. We’re locally owned and owner-operated, which in Camas means something. When you call, you get a straight answer about what’s wrong, what it costs, and when we’ll be there. No call center, no runaround. The person who answers the phone is the person who knows what a Gorge wind event does to a swing gate on Prune Hill.
Camas homeowners call us because we repair first. We weld on site, in your driveway, rather than hauling your gate to a shop or telling you to buy a new one. Every job carries the 90-Day Done Right Promise, in writing. If it’s not right, one call brings Hal back. No fine print, no hedging.
We dispatch crews to Camas from our Seattle office, but the work is local, with background-checked, uniformed technicians who know this area’s specific gate problems. We stock common parts for the brands Camas homeowners actually have. That means faster turnaround when a 1990s control board dies or a hinge post finally gives out.
Our Gate Repair Services in Camas
Electric Gate Repair
Electric gate operators in Camas fail for the same reason the wind blows hard here: they get worked hard. A single November east-wind week can knock a LiftMaster operator out of travel-limit calibration. We diagnose the control board, limit switches, safety photocells, and wiring. If the board is obsolete, we’ll tell you honestly whether it’s worth retrofitting or replacing.
Automatic Gate Repair
Automatic gates that won’t open, won’t close, or reverse for no reason usually have a sensor, limit, or operator fault, not a bad motor. We service operators from Viking, Ghost Controls, DoorKing, and Elite. In Camas, wind-driven racking often shifts the gate frame just enough to trip the safety edge or photobeam, and the fix is mechanical, not electrical.
Hinge & Post Repair
If your gate sags on one side, the problem is the hinge post, not the gate panel. In Camas’s wet winters, water collects at post bases on hillside lots, and softwood posts rot from the inside while looking fine on the surface. We dig them out, set a properly anchored post, and weld or bolt the hinges back square. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gates drift out of plumb on Camas’s sloped lots as soils settle and freeze-thaw cycles loosen the post footing. We rack the gate back into square, reinforce the post if needed, and adjust the latch, drop rod, and operator travel limits. A gate that latches cleanly after realignment usually stays that way when the post gets the support it should have had from the start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Camas
We service and stock parts for the gate operators most common in Camas: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep a working inventory of circuit boards, limit switches, remote receivers, and safety sensors for these brands, which means when we find a bad DoorKing board or a failed Viking sensor on a Camas job, we can often fix it the same visit instead of ordering parts and coming back.
Common Gate Repair Problems We See in Camas Homes
- Wind-racked frames on east-facing gates. The Gorge winds blow hard through Camas, and gates on the east sides of Prune Hill properties take the brunt. Hinges shear, drop-rod hardware bends, and operators lose calibration after a single bad east-wind week.
- Rotted posts on hillside lots. Camas’s wet winters soak the soil around post bases, especially on sloped Prune Hill properties. Softwood posts rot below grade, the gate settles, and suddenly it won’t latch. The gate sags in the hinge post, not in the middle.
- Obsolete 1990s-2000s control boards. Older operators in Camas were built before modern safety photocells and loop detectors became standard. The board fails to communicate with newer sensors, causing random faults and dead remotes. Sometimes the answer is a retrofit. Sometimes replacement is cheaper.
- Hardware failure on ornamental iron and aluminum gates. Camas’s substantial stock of 1990s-2010s decorative aluminum and iron driveway gates looks fine until the hardware fails. Hinge bolts strip from softwood posts, and latch mechanisms bind when the frame shifts even a quarter inch out of square.
Pricing for Gate Repair in Camas, WA
Here’s what Camas homeowners typically pay, based on jobs we’ve done in the area:
- Hinge replacement or tightening: $180-$340
- Post stabilization or replacement: $400-$850, depending on whether it’s a gatepost or a larger fence line post
- Gate realignment and latch adjustment: $220-$380
- Operator recalibration or limit switch replacement: $250-$400
- Control board replacement (aftermarket or OEM): $300-$640
- Weld repair for cracked frames or broken hinges: $180-$400 per weld point
The price is quoted and agreed before any work starts. You’ll never get a surprise invoice at the door. No trip charge inside the county. Every job carries the 90-Day Done Right Promise in writing. Seniors and veterans get a permanent 10% discount, and there’s $40 off any repair over $200. Call (877) 610-2993 for an exact quote, with a free second opinion on any written estimate. Estimates are free.
We Also Serve Cities Near Camas
Our Gate Repair team regularly runs calls through Washougal, Mill Plain, Orchards, and Barberton, so when a Camas job finishes early, we can often reach a neighbor the same afternoon. If you’re in Camas proper or anywhere west toward Vancouver, the truck is already in the area. Call and we’ll tell you straight when we can get there.
Serving Camas, WA - Our Local Coverage Area
We’re based in the Camas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Camas
Camas sits at the western mouth of the Columbia River Gorge, where seasonal east winds funnel directly through the corridor and routinely exceed 50 mph. Those winds impose sustained lateral stress on swing gates and hinge posts that flat-terrain Clark County neighbors like Vancouver and Portland largely avoid. East-facing gates on the Prune Hill ridgeline take the worst of it, bending drop rods and stripping hinge screws in a single bad east-wind week. If your gate failed after a wind event, call (877) 610-2993 and we’ll tell you what wind-rated repair is actually needed.
In many cases, yes. We can add modern safety photocells, loop detectors, and wireless keypads to older LiftMaster, Viking, and DoorKing operators. But if the original control board is corroded or the motor’s gearbox is failing, chasing parts gets expensive fast, and replacement is often the cheaper answer. We’ll show you both options, with pricing, before any work starts. Call us for a straight recommendation.
The hinge post is the problem, almost every time. A gate sags in the hinge post, not in the middle, and in Camas the usual cause is a post that has rotted below grade or shifted on a sloped hillside lot. We pull it, set a properly anchored post, and rehang the gate square. Fix the panel without the post and you’ll fix it twice.
We do work on solar gate operators, including Ghost Controls and Mighty Mule systems. But Camas’s cloudy, wet winters mean the solar panel often can’t keep the battery topped off, especially when the gate is also fighting Gorge wind loads. For a gate that cycles daily through the winter, we usually recommend a low-voltage AC run or a hybrid setup with a larger panel and higher-capacity battery. We’ll assess what you have and give you the honest math.
A properly set automatic gate should stop and reverse when it hits resistance, and its safety photocells and edge sensors should be functional, aligned, and tested regularly. If your gate doesn’t reverse on contact, or the safety beam is mounted loose, it doesn’t meet current standards and is a serious hazard, especially with children or pets. We test every gate we service to current UL 325 standards. If yours hasn’t been checked in years, now’s the time. Call (877) 610-2993 for a safety inspection and free estimate.
Call Gatewood Fence & Gate for Gate Repair in Camas
When your gate won’t open, sags hard to one side, or the operator just clicks and does nothing, call (877) 610-2993. A live person answers 24/7. We’ll tell you straight what it’s likely to cost, when we can get to your Camas property, and whether the fix is a simple hinge adjustment or a post that needs to come out. The price is quoted before the work starts, the work carries a 90-Day Done Right Promise in writing, and the name on the invoice is Hal Gatewood’s. You can call the shop or drive up and look us in the eye, because we’re down the road, not three states away.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Camas with honest, owner-operated gate repair since 2001.