Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bronxville
A custom gate installation in Bronxville, NY typically runs $1,800 to $9,500 depending on whether you’re hanging a single ornamental pedestrian gate off a stone pillar or engineering a heavy double driveway gate with matched scrollwork. Most Bronxville jobs involve period-correct ironwork on pre-1940 architecture, so the work takes measured, deliberate time rather than a same-day swap. Hal Gatewood has been fixing and building gates since 2001, and he’ll be the one who answers when you call (877) 610-2993.
Bronxville is not a place where you drop in a powder-coated aluminum panel and call it done. The village was built between roughly 1895 and 1940, and nearly every original gate here is a bespoke wrought iron piece forged to match the house it guards. That’s the work we actually enjoy: matching a 1920s picket profile, rebuilding a crumbling pillar anchor, and sending a gate back into daily use that looks like it has always been there.
Why Gatewood Fence & Gate Is Bronxville’s Preferred Gate Installation Company
We’ve worked on properties throughout 10708 for years, and the pattern is always the same: an older iron gate that’s worth saving, and a homeowner who’s tired of being told to replace it with something that doesn’t match the house. Homeowners in Bronxville don’t want a catalog panel. They want the original scrollwork matched, forge-welded, and rehung so it swings true. That’s what we do.
Hal Gatewood’s name is on the shop and on every invoice. We’re not a rotating crew of subcontractors. When we set a post in Bronxville, we compact the footing for the freeze-thaw reality of Westchester County, not for a showroom floor. And every job we do carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back.
Calls are answered by a live person around the clock. Not a voicemail, not a queue. You’ll get a straight answer on scheduling, pricing, and whether your original ironwork is salvageable. Response to Bronxville is quick because we serve the area regularly and know exactly where Lawrence Park, the Hilltop, and the streets off Midland Avenue are.
Our Gate Installation Services in Bronxville
Swing Gate Installation
Swing gates are the dominant style in Bronxville because they match the original architecture. The challenge is always the same: heavy wrought iron panels hanging on hinges anchored into stone or brick pillars that have survived decades of frost heave and mortar decay. We reset footings, rebuild hinge anchors, and re-hang the original panels so the gate clears the ground and latches without binding. A properly set swing gate in Bronxville should go years without dragging on the uphill side.
Driveway Gate Installation
Driveway gates in Bronxville are often double gates spanning eight to fourteen feet, sometimes more on the larger estate lots. These are heavy, ornamented, and unforgiving if the posts are even slightly out of plane. We build footings below frost depth for this climate, set the posts plumb, and mount the hangings so both leaves meet cleanly at the center. For homeowners who want automation, we run operators sized for the actual weight of the iron, not a generic residential unit rated for a hollow aluminum panel.
Double Gate Installation
Double gates fail most often where the two leaves meet, usually because one post has shifted and the center pickets start overlapping or gapping. The fix starts at the post, not the panel. On a steep lot off Midland Avenue we reset the hinge post footings for a heavy double swing gate that had thrown its clearances after years of freeze-thaw movement, then re-hung the original wrought iron leaves and matched the remaining decorative scrollwork by forge-welding new sections to the exact profile. No off-the-shelf replacement. The gate still looks like it was built for the house, because it was.
Pedestrian Gate Installation
Pedestrian gates in Bronxville are the architectural front door. They sit between stone pillars, usually flanking a bluestone walk, and they carry the same ornamental language as the house itself. We hang them with enough clearance for winter ground movement but not so much that the latch slops. If the existing iron is sound, we restore it. If a section is beyond repair, we forge a matching piece: same picket profile, same scroll, same proportions.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bronxville
For Bronxville homeowners who want automation on a custom swing or sliding gate, we service and install Ghost Controls, Viking, and Elite operator systems. We carry parts for these brands locally and can usually schedule an install without waiting on a distant warehouse shipment. That matters when your existing opener fails and you’re locking the gate by hand every night. We also service DoorKing units, which show up regularly on older Bronxville estate properties where the automation was installed decades ago.
Choosing an operator for an ornamental iron gate is different from picking one for a vinyl farm gate. The weight, the wind load, and the swing arc all affect which opener will last. We size the operator to the gate, not the other way around.
Common Gate Installation Problems We See in Bronxville Homes
- Frost heave shifting post footings on sloped lots. Westchester County’s repeated freeze-thaw cycles each winter push shallow footings up just enough that a swing gate starts dragging on the uphill side and binding at the latch. We dig below frost depth, which most original Bronxville installations never were.
- Rust migration inside forged scrollwork junctions. The ornamental joints look solid from the outside, but water gets into the weld and eats from within. A gate can snap at a scroll junction under its own weight without any visible warning. We grind back to clean metal and forge-weld the repair, then seal it properly.
- Crumbling stone or granite pillar entries around hinge anchors. The hinge hardware is only as strong as the mortar holding it. Once the anchor starts spalling the face of the pillar, the gate drifts out of plane and the whole installation degrades fast. We rebuild the anchor point before rehanging the gate.
- Mismatched replacement panels from previous patch jobs. We see this often: a prior contractor welded in a generic picket that doesn’t match the original profile. From a distance it’s fine. Up close it’s wrong, and in Bronxville wrong is not acceptable. We match the original scrollwork and profile, even when that means forging a custom section.
Pricing for Gate Installation in Bronxville, NY
Here’s what Bronxville homeowners can expect, in real numbers:
| Gate Type | Typical Bronxville Range |
|---|---|
| Pedestrian gate, custom iron match | $1,800 - $4,200 |
| Single driveway swing gate, ornamental | $3,500 - $7,500 |
| Double driveway gate, custom matched | $6,000 - $12,000+ |
| Operator/automation added | $1,200 - $3,800 |
The two big cost drivers in Bronxville are material matching and post work. Forging custom scrollwork to match an original 1920s profile costs more than ordering a stock panel, and rebuilding a stone pillar anchor takes longer than setting a new post. Every price is quoted and agreed before any work begins, in writing. No number changes at the door. Call (877) 610-2993 and we’ll walk the job with you and give you a firm number.
We Also Serve Cities Near Bronxville
Beyond Bronxville, our crews regularly work in Bronxville and the surrounding Westchester villages. Homeowners in Tuckahoe, Eastchester, Mount Vernon, and Yonkers call us for the same reason: older iron gates that need matched repair, not replacement. If you’re within a short drive of 10708, we’ll come take a look. Gate Installation is what we do every day, but around here it almost always means period-correct restoration of what’s already standing.
Serving Bronxville, NY - Our Local Coverage Area
We’re based in the Bronxville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bronxville
Yes, we can match your original scrollwork. Nearly all original Bronxville gates were forged in place as bespoke elements of pre-1940 residential architecture, and their ornamental scrollwork varies from house to house. A matching picket profile from one Lawrence Park home almost never exists anywhere else in the village, so we forge new sections to match the original profile exactly. We never push a replacement panel when the original iron is sound. Call (877) 610-2993 and Hal will look at your gate personally.
We rebuild the anchor point before we rehang the gate. The existing concrete or granite pillar entries in Bronxville crumble around the hinge post anchors over decades of frost cycling, leaving a heavy iron gate hanging on compromised mortar. If we rehung the gate without addressing that, it would drift out of plane again within a season. The pillar gets rebuilt, the hinge post gets reseated, and the gate goes back up solid.
By setting the post footings below frost depth and using hinge hardware sized for the actual weight of the iron. Decades of freeze-thaw heave on Bronxville’s sloped, wooded lots shift shallow footings just enough that a swing gate begins dragging on the uphill side and binding at the latch. We dig the footing deeper than the original installation ever was, compact it properly, and then mount the gate so its frame carries the load instead of the pickets pulling against the hinges.
Yes. Any automated gate in New York is subject to entrapment protection requirements: photo eyes, reverse sensing, and warning signage at minimum, with additional safety edges depending on the installation. This applies to automatic driveway gates in Bronxville just as it does anywhere else in Westchester. We install every operator to the current standard and we’ll explain what your specific gate needs before we begin.
Sometimes, but not always. Bronxville lots are relatively tight, and a swing gate’s arc can eat driveway space. But converting an ornamental wrought iron swing gate to a sliding configuration usually means fabricating a new panel and adding a track system, which changes the look entirely. If the goal is saving space without losing the original character, a better option is often a pair of narrower swing gates instead of one wide one, or a slide conversion that reuses the original panel with a cantilever system. We’ll talk through the trade-offs honestly and quote you both options.
If your Bronxville gate is sagging, binding, or the masonry is failing around the hingework, call (877) 610-2993. Hal will come out, look at the actual gate on your actual property, and tell you straight what it needs and what it’ll cost before any work starts. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bronxville since 2001.