Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Bronxville
Gate Repair - Bronxville often means retrofitting access control onto a gate that was built before keypads existed. We handle that every week here, on Cedar Street, along Pondfield Road, and throughout the 10708 zip code. If your keypad is dead, your remote stopped working, or you want phone entry added to a 1920s wrought iron swing gate, call (877) 610-2993. Hal Gatewood has been doing this since 2001, and the person who answers the phone is the person who will stand in your driveway.
Most Bronxville homes were built between 1895 and 1940. That matters because the gates hung on those stone pillars were fabricated as one-off architectural pieces, not off-the-shelf hardware. Retrofitting access control onto them without destroying the ironwork or the pillars is its own skill set. We have spent years matching original scrollwork and preserving stone profiles while adding modern keypads, phone entry, and safety sensors. This is not a swap-and-go job, and we will not treat it like one.
Why Gatewood Fence & Gate Is Bronxville’s Preferred Gate Access Control Company
Hal Gatewood’s name is on the shop and on every invoice. He has been owner-operated since 2001, and his published address means you can find him if something goes wrong. That is the oldest accountability there is. We carry a 90-Day Done Right Promise in writing on every job. If it is not done right, one call brings him back. No runaround, no fine print.
Bronxville residents call us because the alternative, a national outfit with a call center three states away, quotes one price on the phone and another at the door. We quote the price before work starts and it does not change. We also answer the phone with a live person 24/7. Not a voicemail, not a bot. If your gate is stuck open at 2 a.m. on a cold February night in Bronxville, you will talk to a person who knows what your gate looks like.
Our Gate Access Control team is certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We show up in uniform, background-checked, and we fix the gate in your driveway. We weld on site. We do not haul it off and come back in three weeks. For Bronxville’s historic properties, that distinction is everything.
Our Gate Access Control Services in Bronxville
Keypad Entry
Adding a keypad to a century-old Bronxville gate is one of our most common jobs. The trick is mounting it without chipping the stone pillar or obscuring the original iron pickets. We have fabricated custom faceplates to match 1920s scrollwork, so the keypad looks like it was always there. A typical keypad entry retrofit in Bronxville runs $450 to $900, depending on whether the old wiring can be reused or needs to be replaced with marine-grade conductors.
Remote Control
If your remote works at the bottom of Pondfield Road but not at the top, the issue is rarely the remote. In Bronxville, we usually find the receiver antenna has corroded or the control board is failing from moisture in a damp basement vault. We diagnose it properly before selling you a new remote. Remote and receiver replacement in Bronxville typically runs $150 to $400, and we stock parts for FAAC, BFT, and Linear locally so you are not waiting a week.
Phone Entry
Phone entry lets you buzz open the gate from your cell, or lets a visitor call from the street and reach your phone. On Bronxville estates where the gate sits far from the house, this is often the most practical upgrade. We can integrate phone entry with most existing operators, including older Viking and FAAC units that predate smartphone apps. A phone entry system installed in Bronxville runs $600 to $1,200, including wiring and programming.
Card Reader
Card readers are common for Bronxville homes with staff, frequent deliveries, or a shared driveway. We install proximity readers that can be programmed for multiple cards and integrated with an existing keypad or phone entry. If you have an old card reader on a 1930s pillar, we will match the mounting plate to the original ironwork. Card reader installation in Bronxville typically runs $400 to $800 per entry point.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bronxville
We service and install more than nine major gate brands, but in Bronxville we see a lot of FAAC, Viking, and Linear operators, because those were the workhorses installed in Westchester County during the 1990s and early 2000s retrofits. We also handle Gate Motor & Opener in Bronxville service calls. We stock parts for those brands locally, which means a faster turnaround when your control board dies. We also service LiftMaster and BFT, and we are certified on all of them. If you have a brand we did not mention, ask. We have probably worked on it.
Common Gate Access Control Problems We See in Bronxville Homes
- Freeze-thaw heave on sloped lots. Ground frost shifts post footings each winter. When the pillar moves even a quarter inch, the swing clearance changes, loop detectors stop sensing the car, and the gate reverses or stays open. We realign the posts and reset the safety edges before replacing anything electronic.
- Corroded anchor bolts in stone pillars. The original iron hinge posts on an 80-year-old Bronxville gate sit inside stone or brick pillars. Moisture wicks through the masonry, the anchor bolts rust, and adding a modern operator magnifies the sag. We repair the post first, because fixing the panel without the post means you will fix it twice.
- Intermittent failures in damp basement vaults. Many Bronxville homes have access control boards mounted in basement utility rooms that stay damp all year. The boards fail intermittently, keypads go dead, but the gate motor still tests hot. We relocate or rehouse the board and splice in sealed connectors.
- Pre-smart-era keypad systems that cannot integrate. If your 1990s keypad was installed when “smart” meant a garage door opener with a button, adding a video intercom or phone entry usually requires replacing the control board, not the whole operator. We will tell you honestly when a retrofit is cheaper than a replacement.
Pricing for Gate Access Control in Bronxville, NY
In Bronxville, a keypad entry retrofit runs $450 to $900. A remote receiver replacement is $150 to $400. Phone entry runs $600 to $1,200 installed. A card reader is $400 to $800. A full access control upgrade combining a new control board, keypad, and phone entry on an existing operator runs $1,200 to $2,500. The price depends on wiring condition, pillar material, and whether the existing operator can be reused. We quote the price before any work begins and it does not change. We also offer a free second opinion on any written estimate, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
One thing to know about Bronxville specifically: the village’s architectural review process means you cannot just bolt a modern aluminum keypad box onto a 1920s stone pillar and call it done. The retrofit has to respect the original iron profile. That changes the labor, and it changes the parts. We have done enough of these jobs in Bronxville to know what the review board will accept and what will get flagged. We will design the Bronxville Gate Installation so it passes the first time.
When the existing operator predates modern sensors, adding them costs more. A safety photocell retrofit on a Bronxville swing gate runs $250 to $500 per gate, including wiring and UL 325 entrapment testing. This is not optional. The standard has been in place since 2000, and any operator powered on without compliant safety edges or photocells is a liability. We will not leave a gate that can crush a person or a car.
We Also Serve Cities Near Bronxville
We serve Bronxville and the surrounding communities of Tuckahoe, Eastchester, Mount Vernon, and Yonkers. Our Gate Access Control in Bronxville work often takes us across town lines, and the same crew that knows your gate this week will know it next year.
Serving Bronxville, NY - Our Local Coverage Area
We’re based in the Bronxville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Bronxville
Yes. We mount the keypad on a custom faceplate matched to the original scrollwork and run wiring through sealed conduits that do not require drilling into the stone. In most Bronxville cases, the pillar is untouched or minimally altered in a way the architectural review board accepts. Call (877) 610-2993 and we will look at your specific gate before recommending an approach.
In Bronxville, this is almost always frost heave or a cold-contract wiring issue. Overnight freezing shifts the post or contracts a corroded connector enough to break a safety circuit, so the operator thinks something is in the way and reverses. When the day warms up, the connection re-closes and the gate works. The fix is locating the failing splice or realigning the post, not replacing the operator. We have seen this pattern repeatedly on the sloped lots off Pondfield Road.
Usually neither. The sag is in the hinge post, not the gate panel. On a Bronxville home, that post is iron set in a stone pillar, and after 90 years the anchor bolts are corroded. We repair the post and re-hang the gate, then the existing operator often works fine. Replacement is only the right call when the post is structurally gone or the iron itself is rusted through. We will show you the problem before recommending anything. Our Gate Access Control work always starts with an honest diagnosis.
Sometimes. If the keypad is a standalone unit wired directly to the operator, we can usually integrate phone entry without replacing it. If it is an integrated system from the early 2000s, the control board may not support the newer communication protocols, and replacing the board plus keypad is the cheaper answer than layering incompatible parts. We will tell you which situation you have before quoting a price.
Yes. UL 325 has required entrapment protection, typically safety photocells or contact edges, on all automatic gate operators since 2000. This applies in Bronxville as it does everywhere else in Westchester County. If your gate predates that standard and never got retrofitted, we can add photocells and edges and run the entrapment test so the operator is compliant. Call (877) 610-2993 for a free estimate.
If you live in Bronxville and your gate was hung before your parents were born, Hal Gatewood will treat it with the respect it deserves. He has been fixing gates since 2001, welds on site, and will hand you his cell number before leaving your driveway. Call (877) 610-2993 today for a free, upfront estimate on gate access control in Bronxville.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bronxville and Westchester County since 2001.