Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Boynton Beach, FL
Gate repair in Boynton Beach typically runs $180 to $540 for most hinge, post, and operator fixes, and we can usually have someone at your property the same day you call. The job here is different depending on which side of I-95 you live on: east of the highway, it’s salt-corroded ornamental iron driveway gates from the 1960s and 70s. West of the Turnpike, it’s large-format community slide gates in the 55+ HOA developments, where underground loop detectors fail on a predictable five-to-eight-year cycle. Call (877) 610-2993 and a live person answers, any hour.
Why Boynton Beach Homes Are Different
Boynton Beach is a city of two halves, and the gate work changes completely between them. East of I-95, in ZIP codes 33435 and 33426, you have neighborhoods of 1960s-to-1980s ranch homes along Federal Highway and the Intracoastal. Many still carry their original ornamental iron driveway gates, and those gates have spent decades breathing Atlantic salt air. Hinge posts rust through from the inside out, operator boards develop corrosion on the terminals, and hardware that would last twenty years inland fails in eight or ten near the water. We use marine-grade components out here because standard zinc-coated hardware is a waste of the customer’s money.
The western half of Boynton Beach is a different animal entirely. The stretch west of Florida’s Turnpike, including 33472, 33473, and 33474, holds one of the densest concentrations of 55+ master-planned gated communities in Palm Beach County. That means the dominant gate repair market in Boynton Beach is HOA-managed community vehicular slide gates, not private driveway gates. Dozens of these communities were built in the same 2000s-to-2010s era with the same gate infrastructure installed at the same time, so we see failure patterns repeat almost on an assembly line: underground vehicle-loop wire degrades in saturated clay within five to eight years, and loop-replacement calls cluster predictably by neighborhood age.
Gate Repair in Boynton Beach
Gate repair in Boynton Beach comes down to a few recurring problems, and after years of running calls across the 33424, 33425, 33426, and 33435 ZIP codes, we know which ones to check first. In the western HOA communities, a gate that won’t open for exiting cars is almost always an underground loop detector failure. In the eastern neighborhoods near the Intracoastal, it’s more often decades-old iron gates with salt-corroded hardware. We weld on site, fix what’s actually broken, and only talk replacement when the gate is truly beyond saving. Here’s what Gate Repair looks like in this market.
Automatic Gate Repair
Automatic gate repair in Boynton Beach usually traces back to one of three culprits: a failed loop detector, a worn operator board, or a gear sprocket that’s stripped itself smooth. In the Valencia communities and similar western developments, loop failures dominate. South Florida’s clay soils hold water through the summer, and underground loop wire insulation breaks down in five to eight years. The gate thinks no car is there, so it just sits. We diagnose on the spot, replace the loop, and retune the operator so the gate cycles cleanly. Typical automatic gate diagnostics and repair land between $260 and $460 plus any part that needs replacing.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. In Boynton Beach’s eastern ZIP codes like 33435, decades of salt air off the Intracoastal Waterway eats through mild steel hinge posts from the inside out. The gate looks fine until it doesn’t. We cut out the rotted section, weld in new steel, and rehang the gate so it swings true. Hinge replacement on a single gate runs $220 to $380, and a hinge post weld repair typically runs $280 to $480. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
For slide gates at community entrances, a few degrees of misalignment turns into a gate that grinds on the track and strains the motor until something snaps. For swing gates, especially the ornamental iron driveway gates common east of I-95, settlement and corrosion throw the pickets out of plumb. We realign the frame, adjust the hinges, and set the operator limits so the gate doesn’t fight itself on every cycle. Rack and pinion realignment runs $180 to $340. Show me the gate closing on its own and I’ll show you where it’s failing.
Electric Gate Repair
Electric gate repair in Boynton Beach means more than swapping a board. Low-voltage wiring connections corrode in salt air, solar chargers underperform when canopy trees shade them, and power surges after afternoon thunderstorms take out control boards. We test the full circuit, not just the symptom. If your keypad works but the remote doesn’t, or the gate opens but won’t close, we trace it end to end and fix what’s actually broken. Operator board replacement runs $260 to $460 plus the part, and a full slide gate track rebuild runs $600 to $1,200 when the damage has gone that far.
Why does our Boynton Beach community gate stop opening for exiting cars after heavy rain?
That’s almost always an underground loop detector failure. Boynton Beach’s clay soils hold water after heavy rain, and the moisture accelerates breakdown of the loop wire insulation under the pavement. The gate stops detecting vehicles entirely. The fix is replacing the loop detector and rewiring the loop, which usually takes us half a day. Call (877) 610-2993 and we’ll schedule a diagnostic.
Our HOA board requires three bids for gate repair. Can you work with that process?
Yes, and we do it constantly in the Valencia communities and other western Boynton Beach HOAs. We provide a written quote with the exact work scope, materials, and price, in the format your board needs. We’ll walk the property manager through what’s actually wrong and hold the price while the board runs its approval cycle. Call (877) 610-2993 to schedule the site visit.
Gate Installation in Boynton Beach
A new driveway or community gate in Boynton Beach typically costs $2,400 to $9,500 installed, depending on whether you need a single swing panel, a double swing gate, or a long-run sliding gate for an HOA entrance. Most residential installs take one to two days once materials are on site, and every quote includes the gate, posts, hardware, operator, and the safety devices required for UL 325 compliance. Palm Beach County’s wind-load code adds a permitting and compliance layer that we handle as part of the job. Here’s what Gate Installation involves in this market.
Driveway Gate Installation
Most driveway gate installs in Boynton Beach run $2,800 to $7,500 for a single swing panel with an automated opener, and $4,500 to $9,100 for a double driveway gate. The spread depends on gate length, material, and whether we’re pulling new low-voltage wiring or tying into an existing run. In the eastern ZIP codes, we recommend galvanized posts and marine-grade operators. In the western HOA communities, we install to the wind-load and safety-edge specs in your community’s governing documents.
Sliding Gate Installation
Sliding gates are the workhorse of the western HOA communities in Boynton Beach. A heavy-duty motorized slide gate for a community entrance in the 33473 area typically runs $5,500 to $11,000 installed, including the operator, safety loops, photocells, and edge sensors. The single biggest failure point on these is the underground vehicle-loop wiring, which degrades in saturated clay within five to eight years. We run new wire in conduit and seal every splice so the installation holds up longer than the original.
Pedestrian Gate Installation
A standalone pedestrian gate with a keypad or card reader typically runs $1,800 to $4,200 in Boynton Beach. These are common in the older eastern neighborhoods where a driveway gate isn’t practical but a locked side gate adds real security. We usually run these in aluminum with stainless hardware so they don’t seize up in the salt air.
Does a new gate installation in a Boynton Beach HOA community require board approval?
Yes. In the large western communities, a new vehicular gate or a significant operator upgrade must go through the HOA board and often a reserve-fund approval cycle. We provide a written proposal formatted for board review, including wind-load compliance and UL 325 safety devices. The timeline from proposal to installation can run 30 to 60 days. Call (877) 610-2993 and we’ll get the proposal moving.
What wind-load standards apply to vehicular gates in Palm Beach County?
Palm Beach County requires vehicular gates to meet hurricane-rated or breakaway standards under the Florida Building Code. That means a wind-load calculation for the gate panel and posts, plus documentation showing the design complies with the applicable wind speed zone. Gates in eastern ZIP codes near the coast face stricter requirements than inland gates. We pull permits and provide compliance documentation as part of every installation.
Gate Motor & Opener in Boynton Beach
When a gate motor fails in Boynton Beach, it rarely gives a polite warning. The arm stops mid-swing, the chain binds, or the opener hums once and goes quiet. We work throughout the 33424, 33425, 33426, and 33435 ZIP codes, from the 55-plus communities west of Florida’s Turnpike to the older neighborhoods near Federal Highway where salt air has taken bites out of the original gate hardware. Here’s what Gate Motor & Opener service looks like for this city.
Motor Repair
Sometimes a dead opener just has a blown capacitor or a burned contact. Other times the motor itself has seized from corrosion. We diagnose before we replace, and we show you the failed part before charging you for a new one. A typical motor repair in Boynton Beach runs $180 to $340. In the older communities east of I-95, where salt-laden air has been working on gate electronics for decades, we frequently repair motors that other companies quoted for full replacement.
Motor Installation
A new gate motor in Boynton Beach has to be sized for the gate you actually have, not the gate the parts catalog assumes. Western HOA communities with multi-lane vehicular slide gates need a heavier operator than a single driveway gate in the 33435 ZIP code. A full swing gate opener installation starts around $1,200 and climbs with gate weight and opener capacity. We measure the gate before recommending anything, and we quote the price before the first bolt comes out.
Slide Motor
Slide gate operators see hard use in Boynton Beach’s gated communities, where one motor may cycle forty or fifty times an hour during morning and evening rush. Gear wear, chain stretch, and wheel-bearing failure are the recurring enemies. Slide gate operators, especially the heavier models used in HOA communities, run $2,800 to $5,500 installed when you factor in the operator, mounting, and required safety equipment like photo eyes and warning signage. If a slide motor starts grinding, stop running it and call us.
How fast can you get to a gate motor problem in Boynton Beach?
Most Boynton Beach calls are reached within 60 to 90 minutes, and emergency calls are handled 24/7 because a live person answers the phone around the clock at (877) 610-2993. If you’re in the 33424 or 33426 ZIP code, we’re often on site faster than that. Call when the gate fails and we’ll give you a straight answer on timing.
Can you come out today for a gate motor that stopped working in Boynton Beach?
In most Boynton Beach neighborhoods, yes. We keep common parts for Linear, Viking, and DoorKing operators on the truck, so many same-day repairs are finished on the first visit. If your gate motor quit this morning, call now and we’ll tell you honestly whether it’s a same-day fix. The estimate is free, and the price is agreed before we touch a tool.
Gate Access Control in Boynton Beach
Gate access control in Boynton Beach usually means one of two jobs: a keypad, card reader, or phone-entry system that stopped reading credentials, or a community slide gate that won’t open when a car pulls up. Most calls we run in the western HOA ZIP codes trace back to underground loop detector failure or corroded low-voltage connections. We fix both, usually the same day, and we’re the local crew who answers the phone when you call. Here’s what Gate Access Control covers in this market.
Keypad Entry
Keypads on Boynton Beach’s pedestrian gates and amenity entrances take a beating from sun, salt air, and daily use. Common failure points are corroded wire nuts behind the keypad and worn buttons that won’t register digits. Keypad entry repair typically runs $180 to $340 including the new keypad, wiring repair, and programming. We re-terminate the wiring with sealed connectors and program entry codes on the spot.
Card Reader & Loop Detector Work
Underground loop detectors sit under the asphalt at a community entrance, and in Boynton Beach they fail early because saturated clay soil breaks down wire insulation in five to eight years. When a slide gate won’t open for approaching cars but works fine on the keypad, the loop is the first thing we test. Loop detector replacement usually runs $400 to $800 because we’re cutting and trenching through asphalt or concrete and setting new wire in sealed conduit. Card reader replacement lands around $250 to $450 depending on the reader and whether we’re fixing the enclosure and wiring too.
Phone Entry
Phone entry systems let visitors dial a resident or property manager from the keypad, and when they fail, it’s usually the phone line or the power supply, not the keypad itself. Phone entry power supply replacement runs $220 to $380. We work with the phone-entry gear most HOA communities in Boynton Beach already run, and we’ll reconcile system programming with the HOA’s current resident directory so the right names show up for the right codes.
How does saturated ground in Boynton Beach affect my community’s gate loop detector?
Saturated clay soil in western Boynton Beach breaks down loop wire insulation within five to eight years, causing the gate to stop detecting approaching cars. We replace the loop with sealed wire and set it in conduit to hold off the groundwater longer. Call (877) 610-2993 for a loop test if your gate intermittently refuses to open for vehicles.
Why does our gate keypad work at night but fail during afternoon thunderstorms?
That pattern almost always points to moisture or a failing power supply. Thunderstorm humidity and brief power dips expose weak connections or capacitors that behave fine in dry, stable conditions. We trace the low-voltage feed and test the power supply before replacing the keypad itself, because replacing the keypad without fixing the supply will fail again within weeks.
Gate Parts & Welding in Boynton Beach
Gate parts and welding in Boynton Beach comes down to one reality: salt air eats steel. Hinge posts rust through at the base, gate frames blister along the bottom rail, and operator components corrode years faster than they would ten miles inland. We weld gates on site so the gate stays in your driveway, and we stock the galvanized and stainless hardware that actually holds up in coastal Palm Beach County. Here’s what Gate Parts & Welding covers for this area.
Hinge Replacement
Hinges are the quiet failure point on nearly every gate. In Boynton Beach’s eastern ZIP codes, 33435 and 33426, ornamental iron driveway gates from the 1960s through 1980s have decades of salt-air exposure on their hinge barrels. The pin seizes, the leaf wears oval, and the gate starts dragging. Hinge replacement on a typical single-family driveway gate runs $180 to $350, often with stainless or marine-grade hardware as the upgrade. A gate sags in the hinge post, not in the middle, and that is where we start.
Post Replacement
When a hinge post rusts through at the base, no hinge swap will save it. We see this constantly in Boynton Beach’s older eastern neighborhoods, where irrigation overspray meets salt-laden air and eats the post from the bottom up. Post replacement, which includes digging, setting concrete, and re-welding the gate into alignment, typically lands between $450 and $900 depending on post size and how much concrete work is involved. Fix the panel without the post and you’ll fix it twice.
Rail Repair & Custom Welding
Bottom rails on steel gate frames take the worst of it. Sprinkler mist and coastal humidity combine to blister paint and pit the metal underneath. Rail repair welding runs $150 to $400 per section, and we cut out the rotted section, weld in new steel, and coat it with a marine-grade primer. Some repairs can’t be solved with a catalog part: cracked ornamental scrollwork, a gate that needs narrowing to fit a new post, a custom latch mount for a community pool gate. Custom welding jobs start around $120 and go up based on scope, all done on site in your driveway or at your HOA entrance.
Can you weld a broken wrought iron gate rail without removing the whole gate from the hinge post?
Yes. We weld on site, with the gate still on its hinges. Cutting out the broken section, fitting new steel, and welding it in place is standard work for us. The gate never leaves your property. For Boynton Beach’s older iron gates, we match the material and profile so the repair blends in, then coat it with a marine-grade primer suited to coastal air.
What’s the difference between galvanized and painted steel for gate frames near the Boynton Beach coast?
Galvanized steel is dipped in zinc, which sacrifices itself to corrosion instead of letting the steel rust. Painted steel relies entirely on the paint film. Once the paint chips or scratches near the coast, salt air gets underneath and the steel rusts from the inside out. In Boynton Beach’s humid, salt-prone environment, galvanized or stainless is the specification that lasts. Call (877) 610-2993 for an honest recommendation on your gate.
Brands We Service in Boynton Beach
We service and install the major gate brands found across Boynton Beach’s HOA and residential properties, including Linear, Viking, Ghost Controls, and DoorKing. We keep common replacement parts for these operators on the truck so most repairs don’t wait on shipping. See our brands for the full list of what we work on.
Pricing for Gate Repair in Boynton Beach, FL
| Service | Typical range in Boynton Beach |
|---|---|
| Hinge replacement (single gate) | $220-$380 |
| Hinge post weld repair | $280-$480 |
| Loop detector replacement | $340-$540 |
| Operator board replacement | $260-$460 plus part |
| Gate realignment (rack and pinion) | $180-$340 |
| Full slide gate track rebuild | $600-$1,200 |
| Motor repair (limit switch, capacitor, board) | $180-$340 |
| Keypad entry repair | $180-$340 |
| Card reader replacement | $250-$450 |
| Phone entry power supply replacement | $220-$380 |
| Post replacement (dig, set, re-weld) | $450-$900 |
| Rail repair welding (per section) | $150-$400 |
What pushes the price up in Boynton Beach is almost always the same thing: salt-air severity east of I-95 and the scale of HOA equipment west of the Turnpike. Coastal homes often need marine-grade components, and community slide gates are simply bigger, heavier machines. Whatever the job, you’ll get a written line-item estimate before you agree to anything, and the number on the quote is the number you pay.
Neighborhoods We Serve in Boynton Beach
We cover all of Boynton Beach, including the 33424, 33425, 33426, and 33435 ZIP codes, and we’re out working in these areas every week.
- Valencia Reserve, Valencia Cove, and Valencia Bay
- Canyon Lakes
- Leisureville
- Kings Point
- East side along Federal Highway and the Intracoastal
Response time for the Boynton Beach area is typically 60 to 90 minutes for repair calls, with faster coverage in the central and eastern ZIP codes.
Service Area - Cities Near Boynton Beach
Along with Boynton Beach, FL, our crews serve the surrounding communities every day. We run calls in Lantana, FL just north up Federal Highway, south into Delray Beach, FL, and west through Kings Point, FL, Lake Worth, FL, and the Lake Worth Corridor, FL area.
Serving Boynton Beach, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve Boynton Beach and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the Boynton Beach coverage area; if your address is on it, we can help.
Also serving nearby: Boynton Beach, FL, Lantana, FL, Delray Beach, FL, Kings Point, FL, Lake Worth, FL, Lake Worth Corridor, FL.
FAQs About Gate Repair in Boynton Beach
Most Boynton Beach repair calls are reached within 60 to 90 minutes, and emergency calls are handled 24/7 because a live person answers the phone around the clock at (877) 610-2993. If you’re in the central or eastern ZIP codes, we’re often on site faster than that. Call when the gate fails and we’ll give you a straight answer on timing.
Yes. Palm Beach County’s wind-load code applies to vehicular gates, and we pull permits and provide compliance documentation as part of any installation or significant structural repair. For HOA communities, we also format proposals for board review so the approval cycle moves as fast as it can. We handle the paperwork so you don’t have to.
Yes, and that’s a big part of our daily work here. We coordinate with HOA boards and property managers in the Valencia communities and similar western developments, and we understand how reserves and approval cycles work. When the board needs a written quote before they can approve the repair, we provide that fast. Call (877) 610-2993 and we’ll get the diagnosis moving immediately.
Call (877) 610-2993 for a free estimate on any gate repair, installation, or access control job in Boynton Beach. The price is quoted and agreed before any work starts, and every job carries the 90-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Boynton Beach Customers Say
"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim