Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lake Worth, FL
Gate repair in Lake Worth means dealing with two things most of Florida doesn’t fight the same way: salt air off the Intracoastal Waterway and near-daily summer lightning. Those two forces decide whether your gate fails in seven years or fifteen. Gatewood Fence & Gate fixes hinges, operators, control boards, and sagging frames right where they sit, and a live person answers when you call (877) 610-2993. Hal Gatewood has been at this since 2001, and the name is on the shop, not a franchise agreement.
Why Lake Worth Homes Are Different
Lake Worth splits into two very different worlds. East of I-95 in the 33460 and 33461 ZIP codes, you have 1920s to 1960s bungalows with simple swing gates, narrow driveways, and hinge posts that have been sitting in sandy soil for half a century. West of the Turnpike in 33463 and the 33449/33467 corridor, the master-planned communities like Wycliffe, Journeys End, and Indian Creek run ornamental aluminum and powder-coated steel estate gates tied into HOA access control systems. Those operators are now 20 to 30 years old and hitting their replacement cycles at the same time.
What makes Lake Worth harder on a gate than inland Palm Beach County is the water. The Lagoon and the Intracoastal push salt-laden air across the city all day, every day. Standard powder coating breaks down in five to seven years here under the combined assault of salt, 60-plus inches of rain, and an extreme UV index. Hinges that would last 15 years in Wellington fail in 8 to 10 in the 33460 and 33461 ZIP codes. And when the afternoon storms roll in from June through September, a lightning strike anywhere near a gate operator can fry a control board while leaving the motor untouched. We see waves of those calls after every big storm passes through.
Gate Repair in Lake Worth
Gate repair in Lake Worth is the work we do most. The salt air off the Lagoon eats hinges and lock hardware faster than most homeowners expect, and the summer lightning takes out control boards in the HOA communities west of the city with surprising regularity. If your gate is sagging, grinding, or refusing to respond to the remote, we can usually diagnose it and have it working again the same day. If the fix requires a part we don’t have on the truck, we’ll tell you on the call, not after you’ve been waiting around. For a full look at what’s involved, see our Gate Repair service page.
Electric Gate Repair
When an electric gate stops responding to the keypad or remote, the problem is usually the operator board, a relay, or a wire connection that corrosion has quietly eaten through. In Lake Worth’s salt-air zone, connections that were fine a year ago develop resistance and fail. We test the full circuit, replace what’s actually dead, and leave the rest alone. Basic electric gate repairs in Lake Worth typically run $140 to $250 for a service call that includes realignment or a hinge replacement, and we service Linear, Viking, Ghost Controls, and DoorKing units without making you wait a week for parts.
Control Board Replacement
This is the one we see in waves after summer storms. A lightning strike near a Lake Worth gate operator sends a surge through the low-voltage wiring and kills the logic board while the motor survives. The arm moves when you release the manual clutch, but the keypad and remote do nothing. Control board replacement on common units runs $185 to $420 depending on the board, and we stock replacement boards for the Linear and Elite models most often installed in the 1995-2005 HOA build-out because those communities still run dozens of them.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start every time. In the older 33460 and 33461 neighborhoods, the iron gates often have hinge posts set in concrete that’s cracked or rusted through from decades of salt air. We cut out the bad section, weld in new plate, and reset the post so the gate hangs straight for years. Hinge post rebuilds with on-site welding fall between $350 and $750 depending on how much steel has to be cut out, and the gate never leaves your driveway.
Hinge Replacement
A hinge that looks fine on the outside can be hairline-cracked where the barrel meets the plate. Salt air off the Intracoastal Waterway accelerates that corrosion noticeably in the homes within a mile or two of the water. We cut the old hinge off, weld a new stainless or heavy-gauge steel hinge in place, and re-hang the gate so it swings true. Basic hinge replacement in Lake Worth runs $140 to $250, and the price is quoted before we start.
How fast can you get to a gate repair in Lake Worth?
Same day in most cases. Emergency calls for HOA entrance gates or security gates get priority, and a live person answers (877) 610-2993 24 hours a day. If Hal or his crew can’t be there that afternoon, you’ll know on the call, not after you’ve been waiting around.
Do you cover all of Lake Worth’s neighborhoods?
Yes. We cover the full city, including 33460, 33461, 33462, and 33463, plus the communities around Lake Worth like Greenacres City, Lake Worth Corridor, Palm Springs, and Lantana. East of I-95 and west of it, the older bungalow streets and the gated HOA communities. Same crew, same flat trip policy.
Gate Installation in Lake Worth
Gate installation in Lake Worth means something different out here than it does ten miles inland. The salt air off the Lagoon shortens the life of hinges and operator gearboxes, so the materials and hardware choices you make at installation matter more than they would in Wellington or Royal Palm Beach. We install driveway gates, pedestrian gates, sliding gates, and swing gates across the full city, and every quote includes the gate, posts, operator, and access control as one written price agreed before we start. If you already have an estimate from another company, we’ll give you a free second opinion on it. For a deeper look at what a full installation involves, see our Gate Installation page.
Driveway Gate Installation
Driveway gates split by neighborhood. East of I-95 in the 33460 and 33461 ZIP codes, we’re usually installing a single swing gate on a modest bungalow lot with a narrow driveway. West of the interstate in the 33449 and 33467 corridor, it’s a different animal: ornamental aluminum or powder-coated steel estate gates, sixteen to twenty feet wide, tied to a keypad or card reader. A single swing driveway gate installed with a basic operator typically runs $2,800 to $5,500 in Lake Worth.
Pedestrian Gate Installation
A pedestrian gate next to the driveway is standard in the master-planned communities west of the city. Residents want to walk out without opening the big gate. We install matching pedestrian gates with the same finish and hardware so the HOA doesn’t flag a mismatch. Pedestrian gate installation usually runs $900 to $2,200, and we use stainless or powder-coated hinges rated for coastal exposure because the zinc hardware from the big box stores rusts through in two to three years here.
Sliding Gate Installation
Sliding gates work where the driveway slopes up from the street and a swing gate would drag. We install cantilever and V-track sliding gates, and we pay close attention to post depth and drainage because the soil in parts of 33449 holds water after the wet season. A sliding gate that binds after six months is usually a footing problem, not a track problem. Sliding gate installation in Lake Worth typically runs $3,500 to $7,000 depending on width and whether new footings need to be poured.
Swing Gate Installation
Swing gates are the workhorse of the eastern neighborhoods and the older HOA entrances. The failure we see most often is hinge posts that have shifted in the sandy soil, which makes the gate sag and the operator strain. We excavate and repour footings when the existing post is compromised. If the gate panel itself is still sound, we keep it and replace the hardware. Fix the panel without the post and you’ll fix it twice.
What gate styles and heights are typically approved by Lake Worth HOA architectural committees?
Most Lake Worth HOAs in the 33467 and 33449 ZIP codes approve ornamental aluminum or powder-coated steel gates in black, bronze, or dark green, with heights between 4 and 6 feet for driveway gates and matching pedestrian gates. Submit the style, finish, and height before you order anything. We’ll pull together the documentation your committee wants.
Can we tie a new gate operator into our existing HOA keypad and card reader system?
Yes, in most cases. We install operators that work with existing access control systems, including older DoorKing and Linear keypads, card readers, and loop detectors. If your HOA’s system is outdated and the board wants to upgrade, we can quote the full replacement including the reader, keypad, and wiring.
Gate Motor & Opener in Lake Worth
A dead gate motor in Lake Worth usually means one of two things: a lightning strike took out the control board, or salt air from the Lagoon finally ate through a hinge post or rack track. Either way, you need someone who stocks parts locally and knows these communities. We repair, replace, and integrate gate operators across the older bungalow streets and the HOA communities out west, and we keep the parts on hand that fail most often here. For a broader look at operator work, see our Gate Motor & Opener page.
Motor Installation
A new gate motor in Lake Worth typically runs $850 to $2,400 installed, depending on whether it’s a simple swing opener for a bungalow driveway off 10th Avenue North or a heavy slide operator for an HOA entry on a western 33463 property. We install swing-arm, slide, and ram operators, and we pull the permits Lake Worth and Palm Beach County require. Before any work starts, you get a written price.
Motor Repair
Most gate motor repairs in Lake Worth run $180 to $520. That covers control board replacement, capacitor swaps, limit switch adjustments, gearbox repair, and resetting entrapment sensors. We stock Linear and Elite control boards on the trucks specifically because the 1995-2005 HOA build-out across western Lake Worth used those brands almost exclusively, and Palm Beach County’s daily summer lightning strikes fry them in waves. If your operator arm moves but the gate won’t respond to the remote or keypad, that’s usually the board.
Linear Motor Service
Linear operators are the workhorses of western Lake Worth’s HOA communities. When a Linear motor fails, it’s usually one of three things: a lightning-damaged logic board, a worn gearbox from years of salt-air grit, or a limit switch that’s drifted out of adjustment. We carry Linear-specific parts and have the diagnostic gear to test a unit before we condemn it. If the motor itself is sound, we repair it. We don’t sell you a new operator because the capacitor died.
Slide Motor Repair
Slide gates are common on larger Lake Worth properties and nearly universal in the HOA communities like Wycliffe and Journeys End. A slide motor repair typically runs $250 to $850 depending on whether it’s a rack-and-pinion track adjustment, a chain replacement, or a full motor swap. Salt-air corrosion attacks the rack and pinion tracks hard in this market, especially east of I-95 where the Lagoon is closer. We weld and repair tracks on site.
Do we need UL 325 entrapment protection on our Lake Worth gate motor?
Yes. UL 325 is a federal safety standard, and it applies to every automatic gate operator in Lake Worth, not just new installs. It includes primary and secondary entrapment protection: pressure sensors or current monitoring on the operator, plus external photocells or edge sensors that detect an obstruction. If your existing gate motor doesn’t have working photocells or a functioning automatic reverse, it’s not compliant and it’s a liability.
What causes gate operator control boards to fail so often in Lake Worth versus inland Palm Beach County?
The leading single cause is lightning. Palm Beach County gets near-daily summer thunderstorms, and western Lake Worth’s flat, open terrain puts gate operators and their wiring at direct risk for surge damage. A nearby strike can fry the board even if the motor itself is fine. That’s why we see waves of calls after any significant storm passes through.
Gate Access Control in Lake Worth
Gate access control in Lake Worth typically runs between $350 and $2,850 depending on whether we’re repairing a legacy HOA system, retrofitting an older swing gate, or installing a full keypad, card reader, and video intercom package. Most repairs we complete the same day we’re called. The western communities, Wycliffe, Journeys End, Indian Creek, and dozens more, are filled with gate operators installed 20 to 30 years ago, and those systems are failing in waves now. For a full breakdown of what access control work involves, see our Gate Access Control page.
Keypad Entry
A worn-out keypad on a Lake Worth HOA gate is a daily annoyance for every resident who punches in a code. We replace failed keypads, rewire corroded connections, and reprogram codes on-site. For older Linear and DoorKing systems still running on original hardware, we can usually match a new keypad to the existing operator without replacing the whole control board. Typical keypad replacement or repair runs $180 to $450.
Card Reader Replacement
HOA communities along the Lake Worth Corridor and western planned developments rely on proximity card readers for entry. Salt air off the Intracoastal Waterway eats away at reader housings and terminal connections within a few years. We install weather-rated readers, tie them into existing access control panels, and reprogram the full card database. A single card reader replacement typically costs $250 to $600, with multi-reader HOA contracts priced per gate.
Phone Entry Systems
Phone entry systems let residents buzz in visitors from a cell phone or landline. The older phone-entry boxes installed across Lake Worth in the mid-2000s are now failing, mostly from humidity intrusion into the circuit board. We replace the board or the full unit, reprogram the directory, and test every resident line before we leave. Expect $400 to $900 for a full phone entry replacement depending on the number of units.
Video Intercom Upgrades
More Lake Worth HOAs are upgrading to video intercoms so residents can see who’s at the gate from their phone. We retrofit modern video intercoms onto existing operators, including the legacy Linear and Elite units still running across western Lake Worth. A video intercom retrofit for a single gate typically runs $1,200 to $2,850, including wiring, programming, and resident app setup.
Can we retrofit our 1990s gate operator to work with a modern video intercom for our Journeys End HOA?
Yes, and we do it regularly. A legacy operator with a functioning motor and limits can be retrofitted with a modern video intercom, keypad, and card reader without replacing the operator itself. The video intercom ties into the operator’s open-command terminals, and we install a cellular or Wi-Fi bridge for resident app access. For Journeys End and similar communities, this retrofit typically costs $1,200 to $2,850 per gate.
Do I need a loop detector if my Lake Worth HOA gate only uses remote controls?
If vehicles only open the gate with a remote or phone call, no loop detector is required. Loop detectors are for automatic exit detection, where a car pulls up to the gate and it opens without any input. However, many Lake Worth HOAs add a loop detector to the exit lane as a backup for emergencies and to prevent tailgating. We can install a saw-cut loop in the pavement.
Gate Parts & Welding in Lake Worth
If your gate is sagging, the hinge post has rotted out, or the operator arm moves but nothing responds after a storm, you need someone who welds on site and keeps common parts in the truck. Gate parts and welding in Lake Worth usually means one of two jobs: repairing what salt air and time have eaten away, or fixing a builder-grade operator that was undersized from the day the HOA signed off. We handle both, and we do it in your driveway rather than hauling your gate to a shop. See our Gate Parts & Welding page for details.
Hinge Replacement
Most gate sag does not start in the middle of the panel. It starts at the hinge post. In the western communities, the salt-laden air off the Lake Worth Lagoon and Intracoastal Waterway eats standard steel hinges faster than inland Palm Beach County. A hinge that looks fine on the outside can be hairline-cracked where the barrel meets the plate. Hinge replacement runs $180 to $320 per hinge, and we weld the new one in place rather than bolting it.
Post Replacement
Fix the panel without the post and you will fix it twice. In the sandy soil common across the 33449 and 33467 ZIP codes, an under-reinforced post footing shifts, the gate binds against the operator, and the whole system works itself to death. We cut out the old post, pour a deeper reinforced footing, and set a new post plumb before we re-hang the gate. Post replacement typically runs $450 to $850 depending on post size, footing depth, and whether the operator rail needs to be reworked.
Rail Repair
Slide gates live or die on their rail. Lake Worth’s 60-plus inches of annual rain pools along low rail runs, and the combination of standing water, salt air, and UV exposure warps or corrodes galvanized rail sections within five to seven years. We straighten, splice, and weld rail sections, or replace a run entirely with heavier-gauge material when the original was undersized from the start. Rail repair usually runs $250 to $500 per section, including welding and dressing.
Custom Welding
Ornamental iron estate gates in the master-planned communities were often built with decorative scrollwork welded to thin-gauge frames. Once the powder coating fails, the welds underneath go too. Our on-site custom welding covers broken pickets, cracked scrollwork, and complete corner rebuilds, whether you need a color-matched repair on a 1990s ornamental gate or a reinforcement plate on a modern slide gate under HOA management. Custom welding is quoted per job, and you will know the number before we strike an arc. Most repair welds run $150 to $400.
Can you add automation to a gate that was originally installed manual in a newer Lake Worth development?
Usually yes, but the job often requires more than mounting an operator arm. Many newer construction gates in the western communities were installed manual to save cost, and the original post footings lack the depth and reinforcement needed to handle an operator’s torque. If we mount automation on a post that is not set for it, the post flexes, the gate binds, and both the operator and the post fail.
Do I need to replace the whole gate panel if it is sagging?
No. A sagging gate panel usually means the hinge post has shifted or the hinges themselves have worn, not that the panel itself has failed. In Lake Worth, the sandy soil and salt air make post and hinge failure far more common than panel failure. We replace the post or the hinges, re-hang the panel, and usually save you the cost of a new gate entirely.
Brands We Service in Lake Worth
We service Linear, Viking, Ghost Controls, and DoorKing, among others, and we stock replacement boards and common parts locally so you’re not waiting on a shipment. If your operator has failed and you know the brand, call us and we’ll tell you on the phone whether the part is on hand. See our brands page for the full list.
Pricing for Gate Repair in Lake Worth, FL
| Service | Typical range in Lake Worth |
|---|---|
| Basic service call and realignment | $140 - $250 |
| Hinge replacement (per hinge) | $180 - $320 |
| Control board replacement | $185 - $420 |
| Motor repair | $180 - $520 |
| Hinge post rebuild with on-site welding | $350 - $750 |
| Post replacement with new footing | $450 - $850 |
| Slide motor repair | $250 - $850 |
| Motor installation (residential) | $850 - $2,400 |
| Keypad replacement | $180 - $450 |
| Card reader replacement | $250 - $600 |
| Video intercom retrofit | $1,200 - $2,850 |
What pushes a Lake Worth gate repair toward the high end of these ranges is usually salt corrosion. Homes within a mile or two of the Intracoastal Waterway and the Lagoon see noticeably faster decay on hinges, posts, and operator gearboxes, so a job that starts as a hinge replacement can turn into a post rebuild once we cut away the rusted steel. Every price is quoted and agreed before we start work, and the number doesn’t change at the door.
Neighborhoods We Serve in Lake Worth
We work across the full city, from the 1920s bungalows east of Dixie Highway to the master-planned communities west of the Turnpike. Crews are typically out within a day for non-emergency repairs, and the faster we can get to you, the sooner you’ll know exactly what’s wrong.
- College Park
- Parrot Cove
- Lake Worth Beach
- Whispering Pines
- Wycliffe and the western HOA corridor
Service Area - Cities Near Lake Worth
Beyond Lake Worth, FL, our crews cover Greenacres City, FL, Lake Worth Corridor, FL, Palm Springs, FL, Lantana, FL, and Boynton Beach, FL. Scheduling and dispatch are coordinated from our Miami (South FL) office, and the crews serving these communities are the same people you’d see on a Lake Worth job. Same flat trip policy, same prices, same guarantee.
Serving Lake Worth, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve Lake Worth and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the Lake Worth coverage area; if your address is on it, we can help.
Also serving nearby: Lake Worth, FL, Greenacres City, FL, Lake Worth Corridor, FL, Palm Springs, FL, Lantana, FL, Boynton Beach, FL.
FAQs About Gate Repair in Lake Worth
No emergency surcharge. No trip charge inside the county, and the price is quoted before work starts. A gate that won’t close at midnight is a security problem, not a reason to add an extra fee. Call (877) 610-2993 and you’ll get a real number.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, Hal comes back and makes it right. No runaround, no fine print. That applies to a $160 hinge replacement and a full HOA entrance-gate overhaul the same way.
South Florida’s near-daily lightning strikes in summer are the leading cause of control board failures in the western HOA communities. A strike near the property sends a surge through the operator, and the board dies while the motor still works. Older Linear and Elite units from the 1995 to 2005 build-out are especially vulnerable, and we stock replacement boards for them.
When your gate stops working in Lake Worth, call (877) 610-2993. A live person answers, we’ll tell you straight what’s wrong and what it costs, and the price is agreed before any work starts. Free estimates, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. If you live in a gated community, ask about bulk HOA pricing for multiple gates.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth