Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Arvada
A new driveway gate in Arvada typically runs $3,800 to $14,500 installed, and most projects get a written quote within 48 hours of the site visit. We know that range because we install gates here every week, from the HOA-governed streets of Candelas to the ranch homes near Olde Town. The fastest way to get your exact number is to call (877) 610-2993 and describe what you’re picturing. Hal Gatewood will be the one walking your property, measuring your post spread, and telling you straight what it’ll take.
If you’re reading this from eastern Arvada, where frost heave has been slowly shoving your post out of plumb for twenty winters, the installation conversation starts with the footing, not the gate. If you’re in 80007, it starts with your community’s design standards. Either way, we know the question before you finish asking it.
Why Gatewood Fence & Gate Is Arvada’s Preferred Gate Installation Company
Hal Gatewood has been building and repairing gates since 2001, and his name is on the shop. That matters more in Arvada than most places, because this city has two entirely different gate worlds sitting inside one zip code map. The west side needs a company that can read an HOA design manual and order a satin black powder coat without getting the shade wrong. The east side needs someone who understands that a 1950s ranch home’s gate problem usually starts four feet underground, where the concrete has cracked and let the post walk. We do both, and we’ve been doing both here long enough that a lot of our Arvada work comes from referrals.
When you call (877) 610-2993, a live person answers. Not a voicemail, not a call center, not a chatbot. Usually it’s Hal. Every job, from a pedestrian gate in the 80002 ranch belt to a double swing gate in Leyden Ranch, carries the 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround, no arguing about whether the fine print covers it.
Our Arvada customers tend to be people who wanted a gate that works, not a gate that works for eighteen months and then sags. They call us because the previous contractor either skipped the HOA approval in 80007 and left them with a fine, or poured a shallow footing in 80004 and blamed the hinges when the post heaved. We fix both, and we install it right the first time.
Our Gate Installation Services in Arvada
Here’s what we install most often in Arvada, and what each one actually involves out here.
Driveway Gate
A driveway gate in Arvada is either the first thing you see from the street in Candelas or the missing piece on a ranch home that’s been holding together since the Nixon administration. We build both. Custom ornamental iron, powder-coated aluminum, wood-framed with steel reinforcement, whatever fits the home and the HOA. Every driveway gate we install in Arvada gets posts set in footings deep enough to survive the freeze-thaw cycle, because a gate that looks perfect in July and binds by February isn’t installed, it’s staged.
Swing Gate
Swing gates dominate Arvada’s newer western subdivisions, and for good reason. They’re quieter than slide gates on flat lots, they handle wider openings, and they look right on an ornamental iron or aluminum build. The catch is the sloped driveways you find along the foothills edge of 80007. A swing gate on a grade needs an operator sized for the wind load and the thermal stress, not whatever the big-box store had on the shelf. We match the operator to the gate weight, the panel height, and the prevailing chinook winds, not the other way around.
Sliding Gate
For Arvada properties with short setbacks or steep approach angles, a sliding gate is often the right call. They don’t sweep across the driveway, so they work where a swing gate would clip a car or run into a slope. The slide track is the weak point in this climate. We install cantilever slide gates where the site allows it, because a track buried in Arvada’s freeze-thaw soil will collect debris, ice, and eventually misalignment. In the older eastern neighborhoods, slide gates are less common, but we’ve put them in where a swing arc simply won’t fit.
Pedestrian Gate
Pedestrian gates get overlooked, and in Arvada they shouldn’t. A pedestrian gate on a post that’s heaved half an inch will drag on the latch side every single time. We set these posts the same way we set driveway gate posts. For homes in 80002-80004 that already have a driveway gate but a broken walk-through gate from the 1970s, we can often reuse the hardware and rebuild the panel rather than scrapping the whole thing. That’s the repair-first instinct Hal has had since the start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arvada
We install and service operators from Viking, Ghost Controls, DoorKing, and Elite, among others. If your Arvada home already has a Viking or DoorKing operator that’s humming along and you’re just replacing the gate itself, we’ll match the new panel to the existing opener rather than pushing a full system swap you don’t need. We keep common parts covered, and when a part needs ordering, we know the lead times and we tell you up front. The gate stays in your driveway while we work. We weld on site.
Common Gate Installation Problems We See in Arvada Homes
These are the issues we run into most often in Arvada, and they’re not the same issues you’d find in Wheat Ridge or Westminster.
- HOA finish and brand rejection in 80007: A gate can be code-compliant and beautifully built, and the Candelas architectural committee will still fine the homeowner because the black is the wrong black or the operator brand isn’t on the approved list. In the Candelas and Leyden Ranch communities, written approval is required before replacing gate hardware with a different finish or automation brand. We pull the design standards before ordering a single part, which saves you a teardown and a fine.
- Post heave from the freeze-thaw cycle: Arvada sits at 5,400 feet, and the ground here goes through hard freezes and rapid thaws every winter. A gate post set in a shallow concrete pour will shift out of plumb within a few years. In the older eastern ranch homes, this is the single most common reason a new gate panel won’t hang square. The fix is a deeper footing, not a shim behind the hinge.
- Operator mismatch on sloped driveways: We’ve seen perfectly good swing gates paired with cheap slide gate operators that stall and burn out within months. Chinook winds and thermal contraction put real strain on DC motors. The operator needs to be sized for the gate, the slope, and the wind, not for the price tag.
- Improper photo-eye sensor placement: New automatic gates in Arvada require code-compliant reversing edges and photo-eye sensors, and a lot of the problems we find are sensors mounted too high, too low, or blocked by a post. This is a safety requirement, not a suggestion. A gate that closes on a child or a car is a life-changing event, so we treat sensor placement as seriously as the weld itself.
Pricing for Gate Installation in Arvada, CO
Here are honest numbers for Arvada’s market, not national averages with a Colorado label glued on.
- Pedestrian gate installation: $1,800-$4,500, depending on material, width, and whether we’re replacing posts or reusing sound ones.
- Single swing driveway gate: $3,800-$8,500, including posts, hinges, and manual operation.
- Double swing driveway gate with automation: $7,500-$14,500, including the operator, safety sensors, and control hardware.
- Sliding gate (cantilever or track): $6,000-$12,000, with the higher end landing on heavy ornamental builds with automation.
- Underground operator (FAAC or similar): $4,500-$9,000 added to a swing gate installation, depending on gate weight and wiring complexity.
What moves the number in Arvada is the post work. In 80002-80004, where the existing posts have heaved, you’re paying for new footings at 42-plus inches, and that’s the right place to spend money. In 80007, finish requirements and approved-brand operator lists can bump the hardware cost. The price we quote is the price you pay, agreed before any work starts. And we back it with the 90-Day Done Right Promise in writing. Call (877) 610-2993 for a free estimate.
If you already have a written estimate from another company, bring it to us. Hal will give you a free second opinion on it, and he’ll tell you if the post depth is adequate for Arvada’s soil or if the HOA finish is going to get you fined in Candelas.
We Also Serve Cities Near Arvada
Our Gate Installation team covers Arvada and the surrounding communities, including Wheat Ridge, Berkley, Shaw Heights, and Westminster. If you’re on the edge of Arvada near one of those borders, you’re still in our service area. For more about our local work, see Gate Installation in Arvada.
Serving Arvada, CO - Our Local Coverage Area
We’re based in the Arvada area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Arvada
Yes, in most of the Candelas and Leyden Ranch communities in 80007, you need written approval from the architectural committee before changing your gate’s finish, material, or automation brand. We pull the design standards before ordering parts, so your gate meets the HOA’s requirements the first time. If you’re not sure whether your specific neighborhood requires approval, call (877) 610-2993 and we’ll help you figure it out before any money changes hands.
Your post is heaving because Arvada sits at 5,400 feet, where hard freezes and rapid thaws cycle every winter and push shallow concrete footings out of plumb. In the eastern ranch home neighborhoods especially, posts set 18 to 24 inches deep simply can’t hold against that cycle. The fix is a deeper footing, typically 42 inches or more, with proper drainage at the base. Call (877) 610-2993 and we’ll look at your post up close.
Yes, we install FAAC and other underground operators on existing swing gates, and we do it regularly in Arvada’s 80007 communities where visible operator arms knock against HOA design standards. The existing gate panel has to be square and the posts sound, but if those hold, we can retrofit an underground operator without tearing out your gate. Call (877) 610-2993 and we’ll tell you honestly if your existing gate is worth automating.
Yes, code-compliant reversing edges and photo-eye sensors are required on any new automated gate installation in Arvada, and we treat them as non-negotiable. We mount and calibrate the sensors so they actually function, and we test them before we leave. A gate without working sensors is a serious safety hazard, and we won’t leave you with one. Call (877) 610-2993 to get the details on what your specific installation needs.
On the wind-exposed western edge of Arvada, a powder-coated aluminum swing gate with a properly sized operator is usually the best performer, because the material resists warp and the operator carries the wind load instead of fighting it. Solid wood gates tend to catch chinook winds like a sail and can warp or bind within a couple of seasons out here. We’ll spec the panel and the operator for your specific exposure, not the average house on the block. Call (877) 610-2993 for a site visit and an honest recommendation.
How We Installed It in Leyden Ranch
We installed a custom powder-coated aluminum double swing gate in Leyden Ranch with a FAAC underground operator, matched a LiftMaster keypad entry to the existing MyQ system, and set the hinge posts in 42-inch deep concrete footings to survive the freeze-thaw cycle. The HOA required satin black finish and photo-eye entrapment protection, so we pulled the design standards before ordering a single part. That gate has cycled silently through two winters without a sag correction. That’s the standard we build to in Arvada.
Call Gatewood Fence & Gate
If you’re ready to get a gate installed in Arvada, or if you have a written quote you’d like a second opinion on, call (877) 610-2993. A live person answers, and Hal will be the one who shows up at your door. The price is quoted and agreed before any work starts. No trip charge inside the county. Seniors and veterans get a permanent 10% discount. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arvada since 2001.