Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arvada
Gate repair in Arvada usually runs $190 to $640 depending on whether we’re straightening a heaved hinge post, replacing a motor, or welding a cracked ornamental panel. Most jobs in Arvada are done in a single visit, and because we carry welding gear on the truck, the gate stays in your driveway the whole time. Hal Gatewood has been fixing gates since 2001, and his crew knows the difference between a sagging gate in Olde Town and an HOA-spec automated gate in Candelas. If your gate won’t open or won’t stay closed, call (877) 610-2993 and a live person will answer, day or night.
Key Takeaways
- Gate repair in Arvada typically costs $190-$640 for most hinge, post, motor, and weld work.
- The freeze-thaw cycle at Arvada’s elevation heaves concrete-set posts out of plumb, which is the top cause of latch and alignment failures in the city’s older eastern neighborhoods.
- Western Arvada (80007) HOA communities like Candelas and Leyden Ranch have finish and safety-sensor rules that most out-of-area contractors miss, and missing them triggers fines.
- Our Gate Repair team welds on site, prices everything before work starts, and backs every job with the 90-Day Done Right Promise in writing.
- We answer calls live 24/7 at (877) 610-2993. No voicemail, no call center.
Why Gatewood Fence & Gate Is Arvada’s Preferred Gate Repair Company
We’re local to the Front Range, and we’ve spent years learning exactly how Arvada eats gates. This city sits at the base of the Front Range, and the chinook winds that come down off the mountains swing temperatures 40 or 50 degrees in a few hours. That thermal shock warps wood frames, cracks welds on ornamental iron, and stresses the DC motors in automated openers. Combine that with the hard freeze-thaw cycle at 5,400 feet, and you get concrete post footings that shift a quarter inch every spring until the gate won’t latch at all. We work to Arvada’s actual failure modes, not to some generic checklist written in a cubicle.
Reviews from Arvada customers consistently mention the same things: the person who shows up is the same person who quoted the job, the work is done when we say it will be, and the price doesn’t change at the door. We’re owner-operated, which means Hal Gatewood’s name is on every invoice, his license number is published for anyone to look up, and if something isn’t right, you call one number and he makes it right. That’s not a slogan. It’s been the way this company has run since 2001.
We don’t dispatch from three states away. When you call (877) 610-2993, a live person answers, and if the job is urgent, we’ll tell you exactly when we can be there. No “window” that stretches from Tuesday to Thursday. No contractor who ghosts you after the estimate. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Repair Services in Arvada
Hinge & Post Repair
This is the most common call we get from Arvada, and it’s almost always the same story. The gate sags in the hinge post, not in the middle, and that’s where we start. In Arvada’s older eastern ZIPs (80002 through 80004), the original posts were often set in concrete without deep footings, and after 40 or 50 freeze-thaw cycles, the concrete has heaved a full inch or more out of plumb. We dig to the footing, re-set the post, brace it, and replace the hinge hardware so the gate swings true on the first day and stays true through next winter. Fix the panel without the post and you’ll fix it twice. We’d rather do it once, properly, with a weld if the post is steel and a reinforced footing if it’s wood.
Electric Gate Repair
When an automated gate in Arvada stops responding, the cause usually comes down to one of three things: a tired motor, a failing safety sensor, or a control board that’s been fried by an electrical surge. Chinook winds stress DC motors through thermal contraction, and we’ve pulled more than one gear housing out of a gate in Leyden Ranch that cracked during a temperature swing. We service LiftMaster, Linear, Viking, Ghost Controls, DoorKing, and four other major brands, and we keep the most common control boards and sensors on the truck so we can often fix the opener the same day we look at it. For full replacements, we also install our Gate Motor & Opener in Arvada. Whatever we install gets wired with the safety edges and photo-eye sensors that Arvada’s newer communities require in writing.
Automatic Gate Repair
Automatic gate systems in Arvada run the full range from basic chain-drive openers on five-foot walk gates to heavy-duty linear arm operators swinging 16-foot driveway gates off Wadsworth and Indiana. The problem with a wide, heavy gate is that a weak or mismatched operator burns out early, and the cost of the second repair is always more than the price difference on the first. We match the operator to the actual gate weight and span, not to whatever was on sale at a big box store. If the gate is solar-powered, we’ll test the panel output and battery health, because a panel that’s shaded for half the day in Candelas won’t keep a motor alive through a cloudy January.
Gate Realignment
When a gate drags on the ground, pops the latch, or won’t close because the two halves won’t meet, the fix is rarely just “adjust the hinges.” In Arvada, realignment work usually starts at the post and works outward. We check the post plumb, the hinge wear, the slab slope, and the latch strike all at once, because adjusting one of those without the others just moves the problem six months down the road. On welded-steel ornamental gates in 80007, we’ll often cut and re-weld a hinge plate rather than shim it, because shims look like shims and HOAs notice. When the damage is too severe, we source our Gate Parts & Welding in Arvada to restore structural integrity.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arvada
We’re certified to service nine major gate brands, and the ones we see most often in Arvada driveways are Linear, Viking, Ghost Controls, and DoorKing. We stock common parts for those four locally, which means if your openers board failed or your keypad won’t respond, we’re not waiting on a shipment from a warehouse in another state. Our Gate Repair team works on all nine brands, including LiftMaster, FAAC, BFT, and Mighty Mule, but we won’t try to sell you a new motor when replacing a $90 limit switch would do the job. Our repair-first approach means we fix what’s worn and leave what’s working, and we back that with the 90-Day Done Right Promise on every job.
Common Gate Repair Problems We See in Arvada Homes
- Freeze-thaw heave on concrete-set posts: This is the single most common gate failure across Arvada’s eastern ranch homes from the 1950s through the 1970s. The footing shifts a little every winter, the gate drifts off the latch, and by spring the homeowner has to lift the gate by hand to close it.
- Chinook wind damage to wood frames and welds: A 40-degree temperature swing in four hours makes wood expand and contract fast enough to split frame joints, and it does the same thing to the welds on ornamental steel gates in the newer western subdivisions.
- HOA non-compliance on gate finish or operator brand: In Candelas and Leyden Ranch, replacing a black gate hinge with a bronze one can trigger a code violation notice. Out-of-area contractors skip the design review, homeowners pay fines, and then we’re called in to redo the work correctly.
- Undersized operators on wide driveway gates: A lot of Arvada’s acreage properties in 80007 have 14- or 16-foot gates running on operators that were built for 10-foot gates. The motor burns out early, the board overheats, and the whole system fails during a cold snap when you need it most.
Pricing for Gate Repair in Arvada, CO
Here’s what realistic gate repair pricing looks like in Arvada, based on the work we’ve done across the city’s ZIP codes.
| Service | Typical Arvada Price |
|---|---|
| Hinge adjustment or replacement (single gate) | $190-$340 |
| Concrete post reset with new footing | $350-$640 |
| Gate realignment (post, hinge, and latch together) | $240-$480 |
| Electric opener motor replacement | $420-$880 |
| On-site weld repair (cracked panel or hinge) | $180-$420 |
| Full operator replacement on a standard driveway gate | $850-$1,900 |
These are honest ranges for Arvada’s market. The specific price depends on the gate’s size, materials, and access, but it’s always quoted and agreed before any work starts. You will not get a higher number at the door. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. If you have a written estimate from another company, bring it and we’ll give you a free second opinion. Call (877) 610-2993 and you’ll get a straight answer, not a sales script.
We Also Serve Cities Near Arvada
When you’re in Arvada, Gate Repair in Arvada is what we do, but we also regularly travel to neighbors in Wheat Ridge, Berkley, Shaw Heights, and Westminster. If you’re on the west edge of town near Leyden or the east edge near Tennyson, we’re already working gates in those neighborhoods on a regular basis. Give us a call at (877) 610-2993 and we’ll tell you honestly whether we can get to you.
Serving Arvada, CO - Our Local Coverage Area
We’re based in the Arvada area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Arvada
Your gate post is heaving because the concrete footing it’s set in wasn’t dug below the frost line, and Arvada’s freeze-thaw cycle at 5,400 feet pushes that footing up a little bit every winter. That’s why older ranch homes in 80002 through 80004 see their gates drift off the latch every spring. The fix is to dig out the old footing, set the post deeper, and re-anchor it so winter can’t keep lifting it. Most post resets in Arvada run $350 to $640, and the difference after one winter is the gate closing true without a shoulder shove. Call (877) 610-2993 for an exact quote, and remember there’s no trip charge inside the county.
Yes. Candelas and Leyden Ranch architectural committees enforce strict finish and hardware standards, and if a new operator or hinge plate doesn’t match the approved finish, the homeowner gets a violation notice and a fine. We pull the HOA design standards before we order parts. We’ve done this enough times to know that matching a powder-coat finish on a Vega hinge or a DoorKing operator saves weeks of back-and-forth. If you’re in 80007 and you’re not sure whether your gate work needs review, call (877) 610-2993 and we’ll help you figure it out before any money gets spent.
Arvada adopts the state’s automation safety standard, which means automatic gates need a reversing mechanism, typically a photo-eye sensor or safety edge, that stops and reverses the gate when it meets resistance or detects a person or vehicle in the path. In the HOA communities of 80007, we also see minimum sensor height requirements on new installs and retrofit requirements whenever a motor or board is replaced. A gate without working safety sensors is a liability and an easy inspection failure. We wire every automatic gate repair with the proper photo-eye and reversing edge as a standard part of the job, not an add-on you have to request. For properties needing entry management, we also integrate Gate Access Control in Arvada.
You can, and on long rural driveways in western Arvada where running mains power means trenching 300 feet across a yard, solar is often the smarter choice. Solar openers need a panel with good southern exposure, a battery bank that can hold enough charge through a cloudy stretch, and a motor that’s matched to the gate weight, because solar DC operators are less forgiving of an overloaded gate than AC units are. A solar opener install in Arvada typically starts around $1,100 for a single gate, and we size the battery and panel to the actual gate and the actual sun, not to a brochure number. Call (877) 610-2993 for a free measure and a written price.
It’s both. Arvada’s chinook winds can swing the temperature 40 or 50 degrees in a matter of hours, and that rapid expansion and contraction is what splits the wood fibers in your gate frame. Then winter arrives and the freeze-thaw cycle gets into those splits and widens them. A warped gate frame usually won’t straighten itself, but if the frame is still sound, we can often re-brace it, repair the joints, and re-hang it so it closes true without replacing the whole gate. If the frame is too far gone, a replacement frame with properly sealed joints will outlast the original by years. Call (877) 610-2993 and we’ll look at it honestly before you spend another weekend fighting a latch that won’t meet.
One More Thing About Arvada Gates
There’s an east-west split in this city that no neighboring town has at this scale. Drive through the older neighborhoods around Olde Town Arvada and you’ll see wood fence gates and chain-link drive gates that have been standing since Nixon was in office, all of them fighting the same battle against post heave and rusted hardware. Drive west into 80007 and you’re in a different world: powder-coated ornamental gates, automated openers, HOA design standards, and safety sensors that have to be right or the neighborhood committee notices. We work both sides of that split, and we know the difference because we’ve been fixing gates here long enough to see the same gates fail twice. Fix the gate the first time and it’ll be someone else’s problem in 20 years. Call (877) 610-2993 and we’ll come put eyes on it.
Written by Hal Gatewood, Owner at Gatewood Fence & Grant, serving Arvada and the Front Range since 2001.