Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Arvada
A sagging gate in Arvada almost always comes down to two things: a hinge post that has heaved out of plumb from the 5,400-foot freeze-thaw cycle, or a weld that gave out after one too many chinook wind swings. We fix both, and we do it in your driveway. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and our Gate Parts & Welding crew knows the difference between a 1950s ranch gate in the 80002 ZIP and an HOA-spec ornamental iron gate out in Candelas. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
Key Takeaways
- Arvada’s freeze-thaw cycle heaves concrete-set posts out of plumb, and that’s the root cause of most gate failures here, not the hinges themselves.
- Hinge replacement, post replacement, custom welding, and rail repair are the four jobs we do most across Arvada’s older eastern ranch belt.
- Western Arvada’s 80007 HOAs often require written approval before you swap an operator brand or finish, and we pull those standards before ordering parts.
- Every job carries Hal’s 90-Day Done Right Promise in writing, and you get upfront pricing before any work starts.
Why Gatewood Fence & Gate Is Arvada’s Preferred Gate Parts & Welding Company
We’re not a national outfit with a call center three states away. Hal’s name is on the shop, his address is published, and his license number is there for anyone to look up. That’s the accountability that matters to homeowners in Arvada who have been burned before. When we quote a gate repair over the phone, that’s the price. You won’t get a different number when the truck pulls up.
Our crew has been working gates in Arvada long enough to know which neighborhoods need which approach. We answer 24/7 with a live person, which means when a gate jam is a genuine safety issue at ten o’clock at night, you’re not leaving a message and hoping. No trip charge inside the county, and $40 off any repair over $200. Seniors and veterans always get 10% off, no haggling needed.
Our Gate Parts & Welding Services in Arvada
Hinge Replacement
In Arvada’s older eastern ZIPs, hinges fail because the post behind them has moved. A freeze-thaw cycle that swings a post an inch out of plumb puts every ounce of gate weight on the hinge barrel. We stock a range of adjustable and heavy-gauge hinges, and we don’t just swap the hinge. We correct the post alignment first, then hang the gate square. That’s the difference between a repair that lasts five years and one that lasts one winter.
Post Replacement
Arvada’s clay-heavy soils hold water, and at 5,400 feet, that water freezes and expands. Old concrete footings crack, posts lean, and latches stop meeting. We demo the old footing, re-set the post in new concrete at the proper depth for Arvada’s frost line, and weld the hinge brackets back to plumb. It’s a two-person job on most ranches in the 80002 through 80004 corridor, and we do it without tearing up your irrigation line.
Rail Repair
When a wood gate drags, the rail is usually the first thing to go. Water wicks into the end grain, the wood swells, and the rail sags. We cut out rotted sections, scarf in new material, and reinforce with steel where the hinge hardware mounts. On metal gates, rail repair often means welding a cracked crossmember back to straight and adding a gusset so the same crack doesn’t return with next season’s chinook winds.
Custom Welding
We weld on site, in your driveway. Not everything a homeowner in Arvada needs is a bolt-on part. When an ornamental gate off West 64th Parkway has a broken scroll or a cracked stile, we cut, fit, and weld the repair, then match the finish so the repair doesn’t look like a patch. Same goes for ranch gates where the previous owner improvised with a turnbuckle and a hose clamp. Hal fixes what other companies want to replace, and the weld goes in front of you, not back at some shop across town.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arvada
We’re certified to service nine major gate brands, including DoorKing, Viking, and Ghost Controls, and we carry our Gate Motor & Opener in Arvada parts for all of them. If your operator out in Leyden Ranch is a Viking that the HOA specified, we stock the boards and remotes to keep it running. If your Candelas driveway has a Ghost Controls swing unit, we have the parts on the truck and the wiring diagrams in memory. Having the right brand knowledge matters in Arvada, because the 80007 HOAs don’t like substitutions, and the older eastern homes have whatever the original builder installed three owners ago.
Common Gate Parts & Welding Problems We See in Arvada Homes
- Post heave in the ranch belt: The 80002 through 80004 ZIPs sit on clay, and the annual freeze-thaw cycle works concrete footings loose. Once a hinge post leans out of plumb, the latch stops catching and the gate binds against the post. Re-setting the post is the permanent fix; replacing the hinge alone just buys you a few months.
- Chinook-cracked welds: Arvada gets downslope winds that swing the temperature 40 to 50 degrees in a few hours. Steel expands and contracts. Over a decade, that thermal cycling cracks welds at the corners of metal gate frames. We weld those cracks and add reinforcement so the repair outlasts the original.
- HOA entrapment protection failures in 80007: Automated gates in Candelas and Leyden Ranch have to meet UL 325 entrapment standards, and the HOA architectural committees check. A missing photo-eye or a dead reversing edge means the repair fails inspection. We test and, where needed, replace those safety components on every automated gate we touch.
- Shared driveway squeeze in Olde Town: A lot of Arvada lots near Olde Town were platted before setback rules changed. There isn’t enough room for a swing gate to arc across a shared driveway, so a slide gate with rack and pinion hardware is the only workable answer. But the loop detector wiring from an old installation is frequently incompatible, and we sort that out before we hang the new panel.
Pricing for Gate Parts & Welding in Arvada, CO
Hinge replacement on a single wood or chain-link gate in Arvada typically runs $160 to $280. Re-setting a heaved hinge post in new concrete runs $380 to $650, depending on whether the old footing needs full demo and whether we’re working around irrigation lines. Custom welding on a steel gate frame usually lands between $195 and $450 for a typical crack repair with reinforcement. Rail repair on a wood gate runs $140 to $320.
| Service | Typical Arvada Price Range |
|---|---|
| Hinge replacement (single gate) | $160 - $280 |
| Post replacement with new concrete footing | $380 - $650 |
| Custom welding (crack repair + gusset) | $195 - $450 |
| Rail repair (wood or metal) | $140 - $320 |
The price you’re quoted is the price you pay, and we agree on that number before any work starts. No trip charge inside Jefferson and Adams counties. Seniors and veterans get a permanent 10% off, and any repair over $200 gets $40 off. We also offer a free second opinion on any written estimate from another company. If someone told you the whole gate needs replacing and you want a second look, call (877) 610-2993.
We Also Serve Cities Near Arvada
While this page is about Gate Parts & Welding in Arvada, our crews work the whole northwest metro. We regularly handle hinge and post repairs in Wheat Ridge, Berkley, Shaw Heights, and Westminster, and the same 90-Day Done Right Promise applies everywhere we go.
Serving Arvada, CO - Our Local Coverage Area
We’re based in the Arvada area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Arvada
Arvada sits at the base of the Front Range, and the temperature swings here are more severe than on the flatter ground further east. The hard freeze-thaw cycle at 5,400 feet works water into the soil around a concrete footing, freezes it, and expands it. Over five or ten years, that expansion literally lifts a gate post several inches, throwing the latch out of alignment. In Denver’s flatter eastern suburbs, the same cycle is gentler and posts stay seated longer. In Arvada, post heave is the single most common reason a gate stops latching. Call (877) 610-2993 and we’ll check the post before we touch the hinge.
Yes, in most of the 80007 HOA communities, you need written architectural approval before changing an operator brand, gate finish, or hardware configuration, and that applies to welding changes too. We pull the HOA design standards for your specific community before ordering parts, so the work passes inspection the first time instead of costing you a fine and a do-over. If you’re unsure whether your Candelas or Leyden Ranch gate needs approval, call (877) 610-2993 and we’ll help you figure it out.
In most Arvada cases, no. If the panel itself is sagging because a weld cracked or a wood frame is rotting, we can weld or sister the repair and straighten the panel at the hinges. But if the hinge post has heaved out of plumb, which is the most common cause in the 80002 through 80004 ranch belt, welding the panel square won’t fix the underlying misalignment. Fix the panel without the post and you’ll fix it twice. We’ll tell you which one you have before we quote the work, and the estimate is free.
Automated gates in Arvada, especially in the 80007 HOA communities, must meet UL 325 entrapment protection standards. That means a functioning reversing edge or photo-eye sensor pair, and the operator has to be wired to stop and reverse when the beam is broken or the edge is compressed. Welding or replacing parts on the gate structure doesn’t get you out of the safety requirements. If the photo-eyes are failed or the edge strip is dead, the repair fails inspection, and the HOA won’t sign off. We test every automated gate we work on and replace non-functioning safety components as part of the job, including Gate Access Control in Arvada systems that need updating.
If you have a shared driveway with a narrow setback, a swing gate usually won’t fit. The swing arc needs clearance that a lot of Arvada lots near Olde Town don’t have. In that case, a slide gate with rack and pinion hardware is the right answer, but the existing loop detector wiring is often incompatible with a slide operator, and the old conduit may need to be pulled. For new setups, we also handle Gate Installation - Arvada from the ground up. We handle the power run, the rack install, and the safety edges, and we’ll tell you before we start exactly what the job includes. Call (877) 610-2993 for a free measure and a written price.
Why the East-West Split Matters for Arvada Gate Repairs
We carry different parts for different ZIP codes in Arvada, and that’s not something a generic gate company does. Out west in 80007, in Candelas and Leyden Ranch, the gates are ornamental iron or powder-coated aluminum, they’re automated, and the HOAs have finish and safety-sensor rules we have to satisfy. We carry DoorKing, Viking, and Ghost Controls parts for those jobs, and we know how to pull the architectural standards before we order hardware. In the older eastern 80002 through 80004 ranch belt, the gates are mostly wood and chain-link, and the failure mode is post heave from the freeze-thaw cycle, plus rot where wood posts meet concrete. We carry adjustable hinges, heavy-gauge post anchors, and welding gear for structural steel repair. No neighboring city has this east-west split at this scale. Westminster doesn’t. Lakewood doesn’t.
We pulled a warped wood swing gate off its hinge post in an 80003 ranch near Olde Town, where decades of chinook-driven thermal swings had cracked the welds on the steel frame and rotted the post footing. Our techs re-set the hinge post in a new concrete footing, welded the rail and latch back to plumb, and fitted a LiftMaster gate operator with a working safety photocell before rehanging the panel. That’s the job. That’s what we do.
Call Gatewood Fence & Gate for Gate Parts & Welding in Arvada
If your gate is sagging, dragging, or won’t latch, call (877) 610-2993. You’ll get a live person, a straight answer, and a price you can hold us to. We’ll come to your house in Arvada, look at the hinge post, check the welds, and tell you what actually needs fixing, not what we think we can sell you. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every job. Hal’s name is on the shop, and the shop is down the road. That’s still the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arvada since 2001.