Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Allen
Gate installation in Allen usually means navigating two things at once: your HOA’s architectural review committee and North Texas black clay. We’ve been building gates for Allen homeowners long enough to know both. A new driveway gate in Twin Creeks or a replacement cedar pedestrian gate in Watters Crossing isn’t a drop-and-go job here. The plans have to match the original subdivision spec, the post footings have to be sized for soil that moves, and the person doing the work has to actually show up. We do. Call (877) 610-2993 and you’ll talk to a live person who can tell you whether we can be at your property this week.
Why Gatewood Fence & Gate Is Allen’s Preferred Gate Installation Company
Hal Gatewood started this company in 2001, and his name is on the shop. That’s not a marketing line. It means when you call about a gate in Allen, the person who answers either did the work or knows exactly who did, what was installed, and what your HOA required. We don’t route calls to a call center. We publish our license number. And if something isn’t right, our 90-Day Done Right Promise is stamped on your invoice in writing, not buried in a warranty PDF you’ll never find again.
We spend a lot of time in Allen’s master-planned communities. Twin Creeks, Watters Crossing, Montgomery Farm, the older sections of 75002, the higher-end 75013 subdivisions with ornamental iron driveway gates. Each one has slightly different architectural standards, and after this many years, we know which management companies move fast and which ones want three rounds of revisions. That local knowledge saves you time before we ever dig a post hole.
Allen customers often tell us the same thing: a national company quoted them a price on the phone, then someone subcontracted showed up and handed them a different number. Our price is quoted and agreed before any work starts. If you have a written estimate from another company, bring it to us. We’ll give you a free second opinion, no charge, and no trip charge inside the county.
Our Gate Installation Services in Allen
Driveway Gate Installation
Driveway gates in Allen run the gamut from ornamental iron swing gates in 75013 to steel tube slide gates across long ranch-style approaches in the more rural eastern edges of town. If you’re in an HOA, the architectural committee will want to see material, finish, height, and setback before they’ll sign off. We prepare that package with you. A typical ornamental iron driveway gate in Allen runs $2,800 to $7,500 installed, depending on width, automation, and whether we’re tying into an existing keypad or loop detector.
Sliding Gate Installation
Sliding gates make sense on Allen properties where a swing gate would eat too much driveway or where a slope makes swing hardware impractical. In the 75002 corridor especially, we install a lot of cantilever and V-track slide gates for side-yard and rear access. The critical piece in Allen is the concrete track or trolley footing. On black clay, a poured track bed that isn’t reinforced for movement will crack within two seasons. We size the footing for the soil, not just the gate. Expect $3,200 to $8,800 for most Allen slide gate installations depending on gate length and operator choice.
Swing Gate Installation
Most Allen residential gates are swing gates, whether they’re double driveway gates or single pedestrian openings. The hinge post is everything. In Allen’s expansive clay, a post set too shallow will lean, and the gate will drag within months. We set posts below the frost line with concrete mixed for North Texas soil conditions, and we true the post before we hang anything. A single swing pedestrian gate typically runs $650 to $1,900 in Allen, including hardware. Double driveway swing gates run $1,800 to $5,500 depending on material and whether we’re adding an operator.
Double Gate Installation
Double gates across a wide driveway need both posts set in the same plane, both leaves matched in height, and a center latch that doesn’t sag. In Allen’s clay, the two hinge posts don’t settle the same way, so we set them together, brace both, and check the reveal before the concrete cures. If the HOA requires a particular picket spacing or top rail profile, we match it exactly to the original spec. Double gate installations in Allen usually run $1,800 to $5,500, and we quote the full number before we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Allen
We install and service operators from Linear, Ghost Controls, Viking, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. For Allen homeowners, that matters because the operator you choose has to work with your existing keypad, your loop detector, and whatever the HOA’s shared entry system already uses. We’re certified on all nine brands and we keep common parts on hand locally, which means we’re not waiting a week on a shipped circuit board when your gate won’t close in the middle of a February ice storm. If the gate closes on its own, we’ll find where it’s failing.
Common Gate Installation Problems We See in Allen Homes
- HOA rejection on the first submittal. Allen’s architectural review boards are specific, and they’re staffed by neighbors who enforce the original plat language. If your proposed gate style, stain color, or height doesn’t match the subdivision’s original spec in Twin Creeks or Watters Crossing, you’ll get it back with a correction note. We prepare the submittal with photos, material samples, and spec sheets so it clears the first time.
- Hinge posts out of plumb from clay movement. Allen sits on heavy black expansive clay that swells in wet winters and shrinks in August. That movement pushes posts out of plumb by two to four inches over a couple of decades, and a gate that’s properly built but poorly posted will sag anyway. We reset the post, not just the hinges.
- Operators misaligned with existing entry systems. In gated sections of 75013, a new slide gate or operator can’t be wired in a vacuum. It has to integrate with the community keypad, the loop detector wiring, and sometimes a shared access system managed by a property company. We coordinate that integration, including the safety edges and sensors the state requires.
- Wood gates aging out in the same wave. Allen’s 1990s growth boom means a huge number of original cedar board-on-board gates are now 20-30 years old and failing at the same time. In the older sections of 75002, we see entire blocks with the same warped tops, dropped corners, and split stiles. Matching the original cedar and the original stain tone is the difference between a gate the HOA passes and one they flag.
Pricing for Gate Installation in Allen, TX
Here are the numbers we actually quote in Allen. A single cedar pedestrian gate replacement in a Watters Crossing or Twin Creeks backyard runs $650 to $1,200, including hardware and stain matching. Ornamental iron single driveway swing gates run $2,800 to $6,200. Double iron driveway gates in 75013 run $3,800 to $9,500 installed, with automation adding $800 to $2,400 depending on operator brand and keypad integration. Slide gates across wider openings run $3,200 to $8,800.
What moves the price: gate width and material, whether we’re resetting posts or drilling new concrete, the operator and any loop detector work, and how much matching the HOA spec requires. What doesn’t move it after we quote it: the price. You’ll sign off on a written number before we start, and that number is what you pay. We also offer a permanent 10% discount for seniors and veterans, and $40 off any repair over $200. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Allen
If you’re just outside Allen, we cover Allen and the surrounding cities too: Lucas, Plano, Murphy, and Fairview. A lot of our Allen customers have family or business properties in those towns, and the same HOA-and-clay conditions apply across most of Collin County. Our Gate Installation team works throughout the corridor daily.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Allen
Count on the architectural review adding one to three weeks to your timeline, depending on your management company and whether your submittal is complete. The committee reviews material, color, height, picket pattern, and setback against the original subdivision spec, and they’ll bounce it back if anything’s off. We prepare the full package up front so it passes the first time. Call (877) 610-2993 and we’ll tell you what your particular HOA typically requires.
Allen’s black expansive clay heaves when it’s wet and contracts when it’s dry, and over 20 years that movement pushes a post two to four inches out of plumb. A proper reset means pulling the old post and footing, drilling a new hole below the movement zone, setting the post in concrete sized for the load, and bracing it until it cures. In Twin Creeks, our crew recently reset a leaning cedar swing gate where the hinge post had tilted nearly four inches, requiring a new concrete footing sized to HOA specs before we hung the matched board-on-board panel and realigned the LiftMaster operator. That’s the standard, not the exception.
Yes. We match the original top rail, picket spacing, finial style, and finish, and we’ll bring material samples to the architectural review if your committee wants to see them. Most of the ornamental iron gates in 75013 were built to subdivision-specific specs, and replacing them with something that just looks close will get flagged. We get the match right the first time.
Yes. Residential automatic gate operators in Texas are required to have entrapment protection: safety sensors, contact edges, or a monitored safety system, depending on the gate type and the operator. We install compliant safety edges and photo eyes on every automated gate we put in, and we test them before we leave. It’s not optional, and we won’t cut that corner.
We handle the coordination directly. We’ll submit the gate spec to the management company’s architectural contact, schedule around their access rules, and integrate the new gate with the existing keypad entry and loop detector wiring so the shared entry keeps working. If the community’s system uses a particular brand like DoorKing or Viking, we service those and we’ll match it. Call (877) 610-2993 and we’ll walk you through what your community’s process looks like.
Call Gatewood Fence & Gate in Allen
If you’re in Allen and you need a gate installed, matched, or replaced without a fight with your HOA, call us at (877) 610-2993. You’ll get a live person, a straight answer, and a written price before we start. Hal Gatewood has been at this since 2001. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.