Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Allen
Gate repair in Allen, TX usually costs between $180 and $680 depending on whether we’re realigning a hinge post or rebuilding an electric operator, and most jobs are done in one visit. We work in Allen’s HOA-governed subdivisions every week, so we know the review process, the original specs, and the soil. When a gate in Twin Creeks or Watters Crossing won’t close, call (877) 610-2993 and a live person answers, day or night.
Allen’s black clay is unforgiving to gate posts. It heaves in wet winters and bakes hard in summer, and a gate that was plumb last spring can drag by fall. That’s why we don’t just adjust hinges and call it done. We look at the post, the footing, the operator arm, and the stiles before we touch anything. The fix has to hold through the next ice storm and the next hundred-degree week, not just until the invoice clears.
Why Gatewood Fence & Gate Is Allen’s Preferred Gate Repair Company
We’re Hal Gatewood’s crew. Hal started this shop in 2001, and the name on the invoice is the same name on the truck and the same guy who’ll look at your gate. We’re not a franchise and we’re not rotating subcontractors through Allen. We answer the phone ourselves, 24/7, because a gate stuck open at midnight is a problem that can’t wait for business hours.
Allen homeowners call us for one reason more than any other: we repair what other companies want to replace. A sagging cedar board-on-board gate in 75002 doesn’t need a new gate. It needs the post reset and the hinges rebuilt. We weld on site, in your driveway, so the gate never leaves your property. And every job, from a $150 latch replacement to a full ornamental iron rebuild, carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround.
Response time to Allen matters because a dragging gate grinds the operator motor, and a sticking latch gets forced until something snaps. We’re usually in your part of Allen the same day you call, and we quote the price before we start. Not after.
Our Gate Repair Services in Allen
Hinge & Post Repair
This is the one we do most in Allen. The original 1990s gates are hitting 25 to 30 years old, and the posts under them have been shifting in the clay for two decades. A hinge that looks “loose” is usually a post that’s leaning three inches off plumb. We reset the post, pour a new footing where it’s needed, and rebuild the hinge so the gate swings true. In Allen’s HOA subdivisions, we also make sure the post material matches the original spec before anything goes back in the ground.
Gate Realignment
Allen’s soil doesn’t settle once. It moves every year, which means a gate that was aligned in March can be dragging by August. Realignment here isn’t a seasonal tune-up, it’s a structural fix. We check the post lean, the hinge wear, and the operator travel, then adjust or rebuild so the gate closes square again. If the post is the problem, we say so and we fix that first. Adjusting a gate without fixing the post is how you end up calling someone new every six months.
Electric Gate Repair
Electric gate operators in Allen fail for the same reason mechanical gates do: the gate itself binds, and the motor burns out trying to push it. We service LiftMaster, DoorKing, Viking, and Linear operators, and we diagnose the whole system, not just the circuit board. If the operator arm is fighting a leaning post, a new board won’t last. We fix the alignment first, then the electronics. On long driveway gates, especially in 75013, we also run power where the original install cut corners.
Automatic Gate Repair
Automatic gates in Allen see a lot: ice storms in winter, triple-digit heat in summer, and constant HOA-mandated access during the day. We repair safety sensors, keypads, remote receivers, and the operator arm itself. If your gate reverses mid-close or beeps but won’t move, call us. We carry parts for the nine brands we service, so we’re not ordering from a warehouse and coming back next week. Most automatic gate repairs in Allen are done same day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Allen
We’re certified to service nine gate brands, and Allen homes run the gamut. In Twin Creeks and Watters Crossing we see a lot of LiftMaster and DoorKing operators on ornamental iron driveway gates. Out toward the acreage, Viking and Linear show up on solar-powered farm gates. We stock common parts locally for Allen customers, and we’ll tell you honestly whether your operator is worth repairing or whether it’s limping along on borrowed time. Either way, you get a straight answer and a written price before we turn a wrench.
Common Gate Repair Problems We See in Allen Homes
- Heaved posts from black clay soil. Allen’s expansive clay swells in winter and shrinks in summer, pushing gate posts out of plumb year after year. The fix is a new footing and post reset, not a latch adjustment.
- Ice storm damage to cedar and iron gates. Freeze-thaw cycles crack 25-year-old cedar stiles and seize metal hinges. We see this in waves after every Collin County ice event.
- HOA spec mismatches stalling repairs. In Allen, replacing a gate panel or post with the wrong material or picket pattern means the repair gets rejected before it’s approved. We match the original HOA spec as a matter of course.
- Operator motors burning out on misaligned gates. When a gate drags, the motor works harder until it fries. Replacing the operator without fixing the gate is a thousand-dollar mistake we see too often from other companies.
Pricing for Gate Repair in Allen, TX
A typical hinge and post repair in Allen runs $250 to $480, depending on whether we’re pouring a new footing. Gate realignment usually falls between $180 and $320. Electric gate operator repairs start around $220 for a sensor or keypad fix and run up to $600 to $800 for a full operator replacement. Ornamental iron weld repair, like a rusted bottom hinge on a 75013 driveway gate, typically costs $200 to $450 depending on how much of the hinge and post need rebuilding.
The price you hear on the phone is the price you pay. We quote the full amount before any work starts, and there’s no trip charge inside the county. Seniors and veterans take 10% off, always. Any repair over $200 takes $40 off. And if you have a written estimate from another company, bring it to us for a free second opinion.
We Also Serve Cities Near Allen
Our Gate Repair team works across Collin County, so if you’re in Lucas on an acreage lot, Plano, Murphy, or Fairview, we’re close. The same crew that resets HOA-spec posts in Allen handles the long driveway gates and solar operators on the edges of town. Call (877) 610-2993 and we’ll be there.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Allen
Yes, in almost every Allen subdivision, architectural review is required before gate materials or styles can be changed. That’s why the Allen gate repair team at Gatewood Fence & Gate is the right call. We match the original HOA-spec material, color, and picket pattern on every repair, so your repair doesn’t get rejected in review. If you’re in an HOA and not sure what’s approved, call us and we’ll walk you through it. Call (877) 610-2993 to start.
Because Allen’s black clay soil heaves and contracts with the seasons, pushing your gate posts out of plumb a little more each year. The gate starts dragging, the operator fights it, and the alignment keeps shifting. The permanent fix is resetting the post in a proper footing, not re-adjusting the hinge every spring. Get an exact price by calling (877) 610-2993, and we’ll tell you if it’s a post problem or an operator problem.
Yes, we install solar-powered operators on long driveway gates where trenching power is too expensive or the HOA won’t allow it. We use heavy-duty operators rated for wide gates, and we size the solar panel and battery to handle Allen’s cloudy winter weeks. If you’re out near the acreage in 75002 and want a gate that runs without a power bill, call (877) 610-2993 for a free estimate.
Yes, in most cases we can weld repair the hinge and the surrounding metal on site, without removing the gate from your driveway. We grind out the rust, weld new material, and repaint to match. If the post itself is rusted through, we’ll tell you and quote the post replacement separately. Call (877) 610-2993 for a weld repair quote.
The real problem is almost always a leaning post, not the latch. In Allen’s clay soil, the post under the hinge side has typically tilted two to four inches over 20 years, so the gate sits lower than the latch expects. Adjusting the latch without resetting the post is a temporary band-aid. We’ll reset the post and realign the hinges, and the gate will close properly. Get a free estimate by calling (877) 610-2993.
Call Gatewood Fence & Gate for Gate Repair in Allen, TX
If your gate is dragging, sticking, or won’t open, call (877) 610-2993. A live person answers, 24/7. We’ll give you an honest price before work starts, and we’ll stand behind the fix with our 90-Day Done Right Promise. Hal Gatewood’s name is on the shop and on every invoice, and that’s the oldest accountability there is. Serving Allen and the surrounding Collin County communities with real repair work, not replacement salesmanship.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Allen since 2001.