Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in West Hollywood, CA
Gate repair in West Hollywood usually runs between $180 and $650 depending on what’s actually wrong, and most jobs are finished the same day. What makes this market different is the concentration of custom automated gates on steep hillside driveways, plus a stock of 1920s and 1930s bungalow courts whose original iron gates have been rusting quietly for decades. If your gate is sagging, grinding, or refusing to open, call (877) 610-2993 and you’ll get a live person, not a phone tree.
Why West Hollywood Homes Are Different
West Hollywood’s sun is hard on a gate. The same UV that fades the paint on a Spanish Colonial doorway also bakes the insulation on operator wiring until it cracks. Rubber seals on slide-gate motors dry out and split. Powder-coated steel still chalks and pits. We see it weekly along the Santa Monica Blvd flats and up in the hills, where the heat sits on south-facing gates all afternoon.
Then October and November bring the Santa Ana winds, and gates that were merely stiff become genuinely dangerous. An unsecured swing gate caught by a 40-mile-an-hour gust bends the frame or strips the gear teeth inside the slide operator. We get those calls every autumn. The fix starts with proper hinging and a wind-load assessment, not a new motor.
The housing stock adds another layer. Those 1920s bungalow courts along Fountain Ave have hinge posts that have been absorbing irrigation overspray for decades. The rust starts at ground level, invisible until the post lets go. And up in the Bird Streets, many of the custom automated gates installed twenty-plus years ago are running obsolete FAAC or Elite motors that need parts most shops won’t chase.
Gate Repair in West Hollywood
Gate repair in West Hollywood usually means one of three things: a swing gate sagging on its hinges, an operator that quit responding to the remote, or a slide gate that grinds halfway and stops. Most of what we see on the flats is fixable same-day, and most of what we see in the hills is too. Our Gate Repair work starts with finding the actual fault, not swapping parts until something works.
Electric Gate Repair
Most electric gate failures in West Hollywood trace back to one of two causes: a dying capacitor in the operator or wiring cracked from years of UV exposure. The dry heat here, particularly on hillside lots with southern exposure, cooks insulation faster than people expect. We replace damaged wire runs, test the motor under load, and adjust the force settings so the gate doesn’t trip its own safety reverse every afternoon when the driveway heats up. A typical electric gate repair in West Hollywood runs $160 to $280 for troubleshooting and minor wiring work.
Automatic Gate Repair
Automatic gates on steep West Hollywood driveways fail differently than gates on flat lots. Gravity pulls a swing gate against its hinges unevenly, which wears the lower hinge faster and eventually throws the gate out of alignment. The operator then works against that misalignment until the gearbox or motor burns out. We level the gate first, then address the operator. Fixing the panel without fixing the post means you’ll call us again in six months. Full operator replacement on an automatic swing gate, including new motor, control board, and remote programming, runs $1,200 to $2,400 for residential systems on typical West Hollywood driveways.
Hinge and Post Repair
On the flats along Santa Monica Blvd and Fountain Ave, the old bungalow courts still have their original wrought-iron pedestrian gates. Decades of irrigation overspray have rusted many of those hinge posts at ground level. The gate looks fine up top, but the bottom hinge is held together by paint and habit. We cut out the rusted section, weld in a new post base, and repaint to match. Hinge replacement or weld repair on a pedestrian gate runs $200 to $420, and if the post is beyond saving, we set a new one in concrete and re-hang the gate square the first time.
Gate Realignment
A gate that drags on the driveway or rattles in the wind is misaligned, and the fix starts at the hinge post, not in the middle of the panel. We check the post for plumb, check the hinges for wear, and adjust the gate so it closes square against the stop. On automated gates, realignment should always be followed by a limit switch test and a force adjustment. Skipping that step is how you strip a rack and pinion. In West Hollywood, where Santa Ana winds slam gates against their stops, realignment with limit switch and force adjustment runs $150 to $300.
Why do gate operators fail faster in West Hollywood than in Santa Monica?
West Hollywood sits inland from the coast and gets significantly more UV exposure and dry heat than Santa Monica. That heat degrades operator wiring insulation, rubber seals, and capacitor internals much faster. Add Santa Ana winds stressing hinges and gear teeth, and gates in West Hollywood simply work harder and age faster. The fix is using operators and wiring rated for high-heat environments and checking seals annually.
Can you repair a 20-year-old FAAC motor on a Sunset Plaza automated gate?
Often, yes. FAAC motors from the late 1990s and early 2000s were built well, and common failure points like limit switches, capacitors, and gearbox seals are replaceable. We source discontinued parts from our legacy stock and we know which current motors mount to the original brackets. You won’t be stuck replacing a gate just because the motor is old.
Gate Installation in West Hollywood
Gate installation in West Hollywood runs about $2,800 to $9,500 for a standard automated driveway gate, with custom ornamental steel work on hillside properties north of Sunset often landing between $8,000 and $18,000. The slope, the gate weight, and whether your existing posts can carry the new gate are what move the number. We handle the full Gate Installation, from footings to final programming.
Driveway Gate Installation
A driveway gate in West Hollywood is a different animal depending on whether you’re on the flats or in the hills. On Fountain Ave or Norton Ave, a steel or aluminum swing gate on a level pad runs straightforward. On a hillside property above Sunset, the gate needs deep reinforced footings, properly counterbalanced hinge geometry, and an operator sized for the grade. A basic single swing driveway gate with an automated opener on a flat lot runs $2,800 to $4,200, and a double swing starts around $4,500 to $7,500.
Pedestrian Gate Installation
Plenty of West Hollywood’s best pedestrian gates are attached to 1920s and 1930s stucco pilasters that have shifted over 90 years. We set new posts properly, match the existing architectural style where it matters, and install self-closing hinges and latches that hold up to the same wind that rattles the bougainvillea every October. If the gate will carry an electric strike for an intercom system, we plan the wiring chase before the post goes in.
Sliding Gate Installation
Sliding gates make sense on West Hollywood lots where a swing gate would block a staircase or a carport entry. Every slide-gate track here gets tested by the same sandy grit and dry heat that eats gate operator wiring. We install cantilever and track systems with bearing positions chosen for the actual gate weight and wind exposure, and we always include proper safety edges and photocells per UL 325. Track and cantilever hardware typically adds $800 to $1,500 more than a comparable swing gate.
How do you handle gate installation on a steep West Hollywood driveway?
We set the hinge posts in deep reinforced footings and engineer the hinge geometry so the gate’s weight transfers downward into the post, not outward into the hinge welds. On steep grades we counterbalance the gate and set the operator’s force and speed limits for constant slope stress. This is the exact failure we see on badly installed Bird Streets gates, and it’s why we don’t use shallow footings.
Will a new automatic gate on a hillside hold up to Santa Ana wind events?
It will if the posts are set deep, the hinge and latch hardware is rated for wind load, and the operator is set to lock closed under side pressure. We’ve re-hung enough wind-damaged gates in West Hollywood to know what lasts. Our installations are tested against a hard manual shove before we finish, and the 90-Day Done Right Promise covers any wind-related failure in the first three months.
Gate Motor & Opener in West Hollywood
If your automatic gate has stopped opening, is grinding when it moves, or won’t close all the way, you’re likely looking at a motor or opener problem, not a gate replacement. Gate motor and opener repair in West Hollywood typically runs between $240 and $680 depending on the operator type and what failed, and we can usually reach your property the same day you call. Our Gate Motor & Opener work covers swing, slide, and linear systems on any grade.
Motor Installation
A new motor installation in West Hollywood usually means working with an existing gate and driveway, not starting from scratch. On hillside properties north of Sunset, that often includes a steep grade where the motor has to work harder than the spec sheet assumes. We install and calibrate operators for swing and slide gates, set the force limits correctly, and make sure safety edges and photo eyes are wired the way code requires. A typical motor installation in West Hollywood runs $850 to $1,900 including labor, depending on operator type and access.
Motor Repair
Most motor repairs in West Hollywood come down to a few predictable failures: a stripped gear, a burned control board, a relay that won’t hold, or a limit switch that’s drifted. We diagnose the actual fault before recommending anything. A gear replacement on a slide motor might run $180 to $340, and a control board replacement on a DoorKing or Elite operator can run $390 to $750 with labor. We stock common parts and chase legacy components that other shops won’t bother with.
Slide Motor
Slide gates in West Hollywood take a beating during Santa Ana wind events. A heavy panel on rollers catches the wind like a sail, and the gear teeth on the motor take the abuse. We’ve replaced racks and pinion gears in the hills after autumn windstorms where the gate was running fine the week before. Slide motor repair in West Hollywood runs $280 to $650 depending on damage. A motor that’s struggling is a motor about to fail, so call sooner rather than later.
Do you work on FAAC and Elite motors in the Bird Streets?
Yes. Many Bird Streets installations from the late 90s and early 2000s are running FAAC or Elite operators that manufacturers have stopped supporting. We stock legacy components and have retrofits for the ones we can’t source. We’ll tell you honestly whether repairing or retrofitting is the better long-term call for your West Hollywood property.
Does the 90-Day Done Right Promise apply to motor work in West Hollywood?
It applies to every job we do, including motor and opener repair and installation in West Hollywood. We put it in writing on the invoice. If something we fixed isn’t working right, call us and we’ll return. No runaround, and we don’t make you climb the hill for a copy of the warranty.
Gate Access Control in West Hollywood
Gate access control in West Hollywood usually means one of two things: a keypad or phone entry system that stopped talking to the gate operator, or a property where the owner wants to lock down who gets through without handing out a fistful of remotes. We handle both every week. Our Gate Access Control work spans the flats around Santa Monica Boulevard and the hillside streets north of Sunset.
Keypad Entry
A dead keypad on a West Hollywood pedestrian gate is often killed by UV damage to the membrane or corrosion at the wiring block from irrigation overspray. We install and program wired and wireless keypads, and we match them to your existing operator whether you need a simple four-digit code for the cleaning crew or unique codes for each unit in a triplex on Fountain. A basic keypad install in West Hollywood typically runs $350 to $650, including programming.
Phone Entry
West Hollywood has a lot of multi-tenant buildings where guests call a unit to get buzzed through. The phone entry boxes on those gates eat batteries and cook in the heat. When a call box goes silent at a building off Santa Monica Boulevard, we troubleshoot the power supply, the phone line, and the relay in that order, because that’s where these systems fail ninety percent of the time. Repairs typically run $225 to $440, and full phone entry system replacement on a West Hollywood apartment building gate lands between $1,800 and $3,200.
Smart Access
More West Hollywood homeowners now want to open the gate from a phone app, grant a temporary code to a dog walker, or get a notification when the gate opens after midnight. We install and configure smart access control that layers on top of your existing operator, and we’re careful to pick systems that work with the older motors we see on the Bird Streets rather than selling you something that needs a full gate replacement just to function. Smart access retrofits run $650 to $2,200 depending on the operator and wiring.
Can you come out for a gate access emergency in West Hollywood after hours?
Yes. A live person answers every call around the clock, and a gate that won’t close is an emergency whether it’s Tuesday at noon or Saturday at midnight. We prioritize security issues in West Hollywood, especially open gates at street level or pedestrian gates that won’t latch. We’ll get you a service time before you get off the phone.
Is gate access control in West Hollywood more expensive than other cities?
Not meaningfully. A keypad replacement in West Hollywood runs $350 to $650, which is in line with what we charge in Century City and Hollywood. The bigger variable is access: hillside driveway work sometimes adds time, but we quote that upfront so there are no surprises. Estimates are free, so call (877) 610-2993 for a straight number.
Gate Parts & Welding in West Hollywood
Gate parts and welding in West Hollywood usually means one of three things: a rusted hinge post on a hillside swing gate, a cracked weld on a steel frame, or a slide gate that got slammed by a Santa Ana gust and stripped its rack. We handle all three, and we do the welding on site so your gate never leaves your driveway. Our Gate Parts & Welding work covers everything from hinge replacements to custom fabrication.
Hinge Replacement
In West Hollywood’s hillside zones north of Sunset, relentless UV and irrigation overspray combine to corrode gate hinge posts at the base faster than you’d expect. Stainless steel fixings and galvanized post footings aren’t an upgrade here; they’re the minimum viable specification. We stock both and install them as standard. A typical hinge replacement on a standard pedestrian gate runs $180 to $340, including parts and labor.
Post Replacement
A sagging gate is almost never a bent panel. It’s a post that’s rotted through at the ground line. We see it constantly on the 1920s and 1930s Spanish Colonial walk-up gates along Fountain Avenue, where decades of irrigation overspray have rusted the original wrought iron at grade level. We cut out the corroded post, set a galvanized footing with stainless J-bolts, and re-hang the gate with proper sag correction. Post replacement typically costs $475 to $850, depending on post size and hillside access.
Custom Welding
Not every gate needs a standard part from a catalog. Many of the custom automated gates in West Hollywood were built for specific driveways and specific houses, and when a hinge leaf tears or a frame cracks, the right fix is a custom weld done in place. We cut back to clean steel, weld in a reinforced joint, and coat the repair so it won’t turn to lace in two seasons. Custom welding repairs on cracked frames or torn hinge leaves run $200 to $600.
Can you weld a cracked gate frame on a steep Bird Streets driveway without removing the gate?
Yes, and that’s how we prefer to do it. We weld on site, in your driveway, whether that driveway is flat on Fountain or pitched at a 20-percent grade off Blue Jay Way. The gate stays where it is, we cut back to clean steel, weld the crack with a reinforced joint, and coat the repair. Removing a custom gate and hauling it to a shop adds risk and time without adding quality.
How can I tell if my West Hollywood gate needs post replacement rather than just hinge repair?
Look at the base of the hinge post. If you see rust staining, flaking paint, or a crack at ground level, the post is compromised and a new hinge will fail within a year. If the gate sags even after tightening the hinge bolts, that’s another sign the post itself is rotted inside. In West Hollywood, where salt air and sprinkler overspray work together, the weld seam at the base is where it starts.
Brands We Service in West Hollywood
We service and stock parts for Viking, Ghost Controls, and DoorKing operators, along with legacy FAAC and Elite systems that are common in the hills north of Sunset. Most common parts are on the truck, and anything we don’t carry is usually sourced within a day or two. See our brands for the full list.
Pricing for Gate Repair in West Hollywood, CA
| Service | Typical range in West Hollywood |
|---|---|
| Electric gate troubleshooting and minor wiring repair | $160 - $280 |
| Hinge replacement or weld repair (pedestrian gate) | $200 - $420 |
| Gate realignment with limit switch and force adjustment | $150 - $300 |
| Slide gate rack and pinion replacement | $380 - $700 |
| Full operator replacement (automatic swing gate) | $1,200 - $2,400 |
| Single swing driveway gate with automated opener | $2,800 - $4,200 |
| Motor repair (swing, slide, linear) | $240 - $680 |
| Motor installation (complete) | $850 - $1,900 |
| Keypad install with programming | $350 - $650 |
| Phone entry repair | $225 - $440 |
| Custom welding repair (cracked frame or hinge leaf) | $200 - $600 |
| Post replacement with galvanized footing | $475 - $850 |
What pushes a West Hollywood job toward the higher end is the slope, the gate weight, and whether the existing posts can carry the load. Every price is quoted and agreed in writing before we touch a single bolt. If we find something unexpected mid-job, we stop and call you before doing anything else.
Neighborhoods We Serve in West Hollywood
We work all over West Hollywood, from the apartment courts along Fountain Ave to the gated driveways tucked into the hills north of Sunset Blvd. Typical response time for gate repair anywhere in the 90069 ZIP is same-day in most cases.
- The Bird Streets
- Sunset Plaza
- Norma Triangle
- Santa Monica Blvd corridor
- Fountain Ave bungalow courts
Service Area - Cities Near West Hollywood
Our crews serve West Hollywood directly, and we also work nearby in West Hollywood, CA, Beverly Hills, CA, Century City, CA, Hollywood, CA, Universal City, CA, and Studio City, CA. Scheduling is coordinated from our Los Angeles office, and the person who shows up knows these streets.
Serving West Hollywood, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve West Hollywood and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the West Hollywood coverage area; if your address is on it, we can help.
Also serving nearby: West Hollywood, CA, Beverly Hills, CA, Century City, CA, Hollywood, CA, Universal City, CA, Studio City, CA.
FAQs About Gate Repair in West Hollywood
We can usually reach West Hollywood properties the same day you call, including hillside addresses north of Sunset. Call (877) 610-2993 and tell us what’s happening. A live person answers 24/7, and we’ll give you a straight arrival window before you hang up.
West Hollywood enforces California building code for automated gates, including UL 325 safety requirements for photocells and edge sensors. For most repairs, no permit is needed. For a new installation, we’ll tell you what the city requires and what we handle on your behalf.
Yes. We work across the entire 90069 ZIP, from the flats along Santa Monica Blvd and Fountain Ave up through Sunset Plaza and the Bird Streets. Steep driveways and custom automated systems are not a problem. We know those grades and the operators installed on them.
Call (877) 610-2993 for a free estimate on any gate repair in West Hollywood. A live person answers, and the price we quote is the price you approve before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Hollywood Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield