Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Temple City
Gate access control in Temple City usually means one of two things: a keypad or intercom that won’t respond when the afternoon heat hits, or a slide gate that grinds to a halt because the alley behind your house just ate another roller. Our Gate Access Control crew works Temple City weekly, and we know which problems show up on which blocks. If your gate won’t open from the keypad, won’t close without someone standing there, or keeps tripping itself on the safety sensor, call (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and he’ll answer the phone himself at midnight if that’s when your gate quits.
Why Gatewood Fence & Gate Is Temple City’s Preferred Gate Access Control Company
Nobody becomes the local gate access control outfit for Temple City by fixing one gate and leaving town. Hal Gatewood is owner-operated, with a published address and license number anyone can look up. When you call about a gate near Live Oak Avenue or around the alleys off Las Tunas Drive, the person who answers knows what a rear-alley concrete pad looks like after ten years of trash trucks. That matters. A dispatcher three states away doesn’t know that your slide gate operator is skipping because debris packed into the rack during Monday pickup.
Every job carries the 90-Day Done Right Promise, in writing. Not as a line item, not as a “most cases” thing. If it’s not done right, Hal comes back. And the phone is answered by a live person, 24/7. Not voicemail, not a chatbot. You can also save the standing offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside Los Angeles County, and a permanent 10% discount for seniors and veterans. The name is on the shop, and the shop is down the road – that’s the oldest accountability there is.
Our Gate Access Control Services in Temple City
Keypad Entry
A keypad that works at 7 a.m. and goes dead by 3 p.m. is a classic Temple City summer problem. The inland San Gabriel Valley heat regularly pushes highs above 95°F, and as the steel gate frame expands, the latch alignment drifts just enough that the keypad sends the signal but the lock can’t release. In Temple City, keypad entry repairs frequently come down to realigning the latch strike and resetting the lock’s position against the changed geometry of the gate. A typical keypad entry repair in Temple City runs $185-$340, depending on whether we’re replacing the keypad, the lock solenoid, or both.
Remote Control
Remote controls die slowly. The range shrinks, then half the time you’re sitting in the car pressing the button three times. On Temple City ranch homes, the most common culprit is an antenna that got knocked loose during gate vibration, or a receiver board failing after years of heat cycling inside a metal operator box. We service Linear, Viking, Ghost Controls, and DoorKing receivers, which covers the vast majority of what’s already installed around Temple City. A remote control setup with a new receiver typically costs $220-$410 here.
Phone Entry
Phone entry systems let you buzz someone through from your cell phone, which matters a lot when your gate sits at the end of a long driveway off a busy street like Rosemead Boulevard. You don’t want to walk out there every time a delivery driver or a relative shows up. Phone entry in Temple City gets installed as either a cellular unit, good for gates where no phone line or ethernet reaches, or a VoIP-based system if your house has reliable internet. Expect $390-$650 for a cellular phone entry install, including programming and testing with your actual gate operator.
Card Reader
Card readers make sense for Temple City households with multiple drivers, caregivers, or a steady stream of landscapers and contractors who need access without you getting up to open the gate. We install proximity readers that work with fobs or cards, and we can program them into your existing operator if the brand supports it. If you’re running a LiftMaster or DoorKing operator, the integration is straightforward. Card reader installation in Temple City runs $280-$490 depending on whether you need a standalone unit or full integration with your existing access control.
Video Intercom
Video intercom is the one upgrade Temple City homeowners ask for most when they’re already having us out for a gate repair. You get a camera at the gate, a monitor inside, and the ability to see who’s there without opening the gate or walking down the driveway. We install video intercom systems that work with your smartphone too, so you can see and talk to someone at the gate even when you’re not home. In Temple City, where mature camphor trees shade many long driveways, we always check the wireless signal path before quoting a system. A wired video intercom install typically runs $550-$850.
Smart Access
Smart access ties everything together: you control the gate, see the camera, and receive alerts on your phone. For Temple City homes with rear-alley trash truck traffic, smart access also means you can check whether your gate closed after the trucks came through. We’ve had customers text us a screenshot of their gate stuck half open after a Monday pickup. Smart access retrofits work with most modern operators, particularly DoorKing and Viking boards that already have communications outputs. A smart access retrofit in Temple City usually falls between $375 and $625 including the controller and programming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Temple City
We’re certified to service nine major gate brands, and around Temple City we see a lot of DoorKing, Viking, and Linear operators mounted on rear-alley slide gates and CMU wall corner posts. Parts for these brands are stocked locally, which means we’re not waiting a week for a control board to ship from somewhere. When a 91780 customer calls with a dead operator on a Tuesday, the part is usually in the truck by Thursday. Ghost Controls systems are also common on the newer conversions, particularly on the long driveways where solar is the only practical power source.
Common Gate Access Control Problems We See in Temple City Homes
- Debris-packed slide gate tracks from rear alleys. Temple City’s mid-century subdivision layout put alleys behind a large share of tract homes, and that means your slide gate track sits at grade where city maintenance vehicles and weekly trash trucks roll through. Dirt, broken glass, bottle caps, and shredded palm fronds pack the track, and the nylon rollers shatter. We see this constantly.
- Keypads that fail in afternoon heat. When the temperature climbs past 95°F, steel gate frames expand. The keypad still sends the code, but the latch and strike are no longer aligned, so the gate stays shut. This is one of the most common Temple City-specific service calls from June through September.
- Solar gate openers undercharged under mature camphor trees. Temple City’s old camphor trees are beautiful until they shade your solar panel for six hours a day. A solar-powered access system with an undersized panel will work all winter, then fail in the summer when the gate cycles more often and the battery never fully charges. The fix is usually a larger panel, a panel relocation, or a second battery.
- Unreinforced CMU pilasters pulling away under motorized load. The original concrete block pilasters on 1950s-1970s Temple City ranch homes were never designed to hold a motorized swing gate. Retrofit hinges get anchored into hollow block, and after a few years of repeated cycling, the anchors pull out and the pilaster starts to lean. We repair the post with rebar and concrete fill before remounting the hardware.
Pricing for Gate Access Control in Temple City, CA
Nothing on this page is a guess. Here’s what Temple City access control work actually costs: keypad repair runs $185-$340, remote and receiver work $220-$410, a phone entry system $390-$650, card readers $280-$490, video intercom $550-$850, and smart access retrofits $375-$625. Slide gate track repair, the one job we do more in Temple City than anywhere else, usually runs $240-$390 depending on whether we’re just clearing and replacing rollers or also rebuilding the rack. Every quote is agreed before any work starts. You’ll never get a surprise invoice at the door. Call (877) 610-2993 and we’ll give you a written price before anything gets touched.
We Also Serve Cities Near Temple City
Our Gate Access Control in Temple City crew also covers Rosemead, San Gabriel, Arcadia, and East San Gabriel. If you’re on the edge of Temple City near the Rosemead border, don’t worry about which city name is on the map – call and we’ll be there. We do the same rear-alley track work all over this part of the San Gabriel Valley.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Temple City
Because trash trucks, alley maintenance vehicles, and the debris they push around are packing dirt and broken glass into your gate track, shattering the nylon rollers and making the rack skip. The fix in Temple City is usually a track cleanup, roller replacement, and a debris shield added to the rack so it doesn’t happen again in three weeks. Call (877) 610-2993 and we can be there this week.
Yes. We install solar-powered gate access systems all over Temple City where long driveways and ranch-style lots make trenching conduit expensive. The key is sizing the panel for the shade you actually have. If mature camphor trees are shadowing the panel location, we’ll spec a larger panel or mount it on a short pole in a clearing. A solar access system in Temple City typically runs $550-$900 installed.
It’s a Temple City summer problem. Inland San Gabriel Valley heat expands the steel gate frame enough to shift alignment, so the keypad sends the code but the latch can’t release. We’ve fixed this exact issue on gates off Live Oak Avenue in July. Realigning the latch strike and resetting the operator limits usually solves it. Call (877) 610-2993 and we’ll diagnose it same week.
Yes. Photo-eyes prevent the gate from closing on a car, a child, a bicycle, or a delivery person. If your gate is on a rear alley in Temple City where kids sometimes walk between houses, photo-eyes are not optional. California law requires them on any automatically operated gate, and we won’t install or repair an operator without confirming the safety sensors are working.
Depends on how it was built, but in Temple City, most of the original 1950s-1970s CMU pilasters were never filled with rebar and concrete. If your pilaster is hollow, motorized gate hardware will eventually pull the anchors out and lean the post. We can refill and reinforce the pilaster in place without tearing down your wall. It’s a known Temple City problem, and it’s a repair we do every month.
Call Gatewood Fence & Gate for Gate Access Control in Temple City
If your gate won’t open, won’t close, or keeps eating rollers every trash day, call (877) 610-2993. Hal Gatewood answers the phone. You’ll get a straight price, a live person, and the 90-Day Done Right Promise in writing. Show me the gate closing on its own and I’ll show you where it’s failing. That’s how we work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Temple City and the San Gabriel Valley.